3 October 2016 in World Journal of Engineering
Purpose: The purpose of the study was to develop a performance flat-plate solar collector that would be used as a solar drier for fruit fig (Ficus carica L). This study proposes how and why solar energy is important for drying the agricultural products. This study aims to expand the domain of solar collector for different purposes and, most important, for agricultural resource normally found in the literature. Design/methodology/approach: The paper opted for an exploratory study using the flat-plate solar collector with drying chamber for drying purposes of agricultural products. During the experiment, the data were collected with moisture content, drying rate of the product and solar irradiation falls on the collector. Findings: This paper describes that how flat-plate collector works for agricultural products and how to reduce the moisture content in the product (fig). Efficiency of collector was evaluated under the ambient temperatures of 24°C. Efficiency also significantly increased from 53 to 55 per cent with an increase in ambient temperature from 22 to 24 °C. Figs (Ficus carica L) were dried in the drying chamber of the flat-plate solar collector. The products were dried at temperature of 55-65°C and 15 to 20 per cent humidity. Research limitations/implications: Because of this research chosen, the research results are beneficiary for agricultural users for drying purposes. Therefore, the researchers are encouraged to dry the agricultural product with flat-plate solar collector, because it reduced the moisture content of the product very fast. Originality/value: This paper fulfills an identified need to study that how flat-plat solar collector can be used.
1 July 2018 in AIP Advances
The evolution of surface topography of 304L stainless steel, induced by long pulse laser with a wavelength of 1070 nm and a pulse width of 10 μs and a pulse number of 400 in air, was investigated in the fluence range between around 3 J/cm2 and 210 J/cm2. Three-dimensional (3D) morphologies and two-dimensional (2D) cross-sectional profiles of microstructures at different laser fluences were compared. Furthermore, surface profiles of the microstructures were quantified by using the inner diameter, the outer diameter, the elevation of central area and the rim height thereof. The trends of the above four geometrical parameters and surface profiles suggest five laser fluence ranges, where the corresponding topographies change from bump to crater. Energy dispersive spectrometer (EDS) was used to analyze surface elements of different microstructures, and the results showed that the content of oxygen had a great influence on surface tension and surface topography. In this study, a complex picture was drawn where melting, vaporization, solidification, melt displacement, melt expulsion and plasma shielding take place at different laser fluences.
22 May 2021 in E3S Web of Conferences
This paper discusses the influence of pH value, temperature and current density on the crystalline and amorphous structure of Ni-W alloy coatings during the electroplating process. The relationship between the corrosion resistance of Ni-W alloy coating and its crystal structure is discussed. In addition, the most common types of ternary systems and composite coatings for electrodeposited Ni-W alloy coatings are introduced. The effects of element types and contents on the hardness, wear resistance, corrosion resistance and thermal stability of Ni-W alloy coatings are analyzed. Finally, the current problems and development directions of Ni-W alloy coatings are proposed.