ScxAl1−xN (x = 0.18–0.40) thin films of ∼28 nm thickness grown on metal polar GaN substrates by molecular beam epitaxy are found to exhibit smooth morphology with less than 0.5 nm roughness and predominantly single-phase wurtzite crystal structure throughout the composition range. Measurement of the piezoelectric d33 coefficient shows a 150% increase for lattice-matched Sc0.18Al0.82N relative to pure aluminum nitride, whereas higher Sc contents exhibit lower piezoelectric coefficients. The electromechanical response of the epitaxial films correlates with the crystal quality and the presence of zinc blende inclusions, as observed by high-resolution electron microscopy. It is further found that the polarity of the epitaxial ScxAl1−xN layers is locked to the underlying substrate. The measured electromechanical properties of epitaxial ScxAl1−xN, their relation to the atomic crystal structure and defects, and its crystal polarity provide useful guidance toward the applications of this material.
Epitaxial ScxAl1−xN thin films of ∼100 nm thickness grown on metal polar GaN substrates are found to exhibit significantly enhanced relative dielectric permittivity (εr) values relative to AlN. εr values of ∼17–21 for Sc mole fractions of 17%–25% (x = 0.17–0.25) measured electrically by capacitance–voltage measurements indicate that ScxAl1−xN has the largest relative dielectric permittivity of any existing nitride material. Since epitaxial ScxAl1−xN layers deposited on GaN also exhibit large polarization discontinuity, the heterojunction can exploit the in situ high-K dielectric property to extend transistor operation for power electronics and high-speed microwave applications.
Here, we have explored the thermal stability of α-(Al,Ga)2O3 grown by the molecular-beam epitaxy on m-plane sapphire under high-temperature annealing conditions for various Al compositions (i.e., 0%, 46%, and 100%). Though uncapped α-Ga2O3 undergoes a structural phase transition to the thermodynamically stable β-phase at high temperatures, we find that an aluminum oxide cap grown by atomic layer deposition preserves the α-phase. Unlike uncapped α-Ga2O3, uncapped α-(Al,Ga)2O3 at 46% and 100% Al content remain stable at high temperatures. We quantify the evolution of the structural properties of α-Ga2O3, α-(Al,Ga)2O3, and α-Al2O3 and the energy bandgap of α-Ga2O3 up to 900 °C. Throughout the anneals, the α-Ga2O3 capped with aluminum oxide retains its high crystal quality, with no substantial roughening.
AlScN is attractive as a lattice-matched epitaxial barrier layer for incorporation in GaN high electron mobility transistors due to its large dielectric constant and polarization. The transport properties of polarization-induced two-dimensional (2D) electron gas of densities of ∼2×1013/cm2 formed at the AlScN–GaN interface is studied by Hall-effect measurements down to cryogenic temperatures. The 2D electron gas densities exhibit mobilities limited to ∼300 cm2/V s down to 10 K at AlScN/GaN heterojunctions. The insertion of a ∼2 nm AlN interlayer boosts the room temperature mobility by more than five times from ∼300 cm2/V s to ∼1573 cm2/V s, and the 10 K mobility by more than 20 times to ∼6980 cm2/V s at 10 K. These measurements provide guidelines to the limits of electron conductivities of these highly polar heterostructures.