Ved Gund

Ved Gund

Auto-generated profile, based on publicly available information

Ved Gund

School of Electrical and Computer Engineering, Cornell University 2 , Ithaca, New York 14853, USA

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 May 2022 in Journal of Microelectromechanical Systems
Verified
Journal Article
Closed access
Rui M. R. PintoRui M. R. Pinto
Rui M. R. Pinto
VGVed Gund
Ved Gund
RDRosana Dias
Rosana Dias
Nagaraja K. K.Nagaraja K. K.
Nagaraja K. K.
Vinaya kumar Kadayra BasavarajappaVinaya kumar Kadayra Basavarajappa
Vinaya kumar Kadayra Basavarajappa
Aluminum nitride (AlN) has gained wide interest owing to its high values of elastic modulus, band gap, dielectric strength, resistivity, thermal conductivity and acoustic velocities, especially because it retains most of its properties and versatility in the thin-film form. This review focuses on applications where the CMOS integration of AlN MEMS has been effectively demonstrated. First, the fundamental concepts of piezoelectricity on polycrystalline $c$ -axis oriented thin-films are introduced and AlN is compared to other common piezoelectric materials, namely LiNbO 3 , LiTaO 3 , quartz, lead zirconate titanate (PZT), ZnO and GaN by thoroughly discussing the material properties, processing and technological implications. After presenting the possible MEMS-CMOS integration strategies, recent demonstrations of AlN-based devices are reviewed, namely energy harvesters, film bulk acoustic resonators (FBAR), contour mode resonators (CMR), gas sensors, imagers, microphones, transducers for chip-scale communication and calorimetric sensors. Finally, other recent applications/integration opportunities are outlined for AlN-based micro-mirrors, flexible sensors and transducers for liquid media and harsh environments. [2022-0006]

11 April 2022 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
JCJoseph Casamento
Joseph Casamento
HLHyunjea Lee
Hyunjea Lee
TMTakuya Maeda
Takuya Maeda
VGVed Gund
Ved Gund
KNKazuki Nomoto
Kazuki Nomoto
DJDebdeep Jena
Debdeep Jena
Epitaxial ScxAl1−xN thin films of ∼100 nm thickness grown on metal polar GaN substrates are found to exhibit significantly enhanced relative dielectric permittivity (εr) values relative to AlN. εr values of ∼17–21 for Sc mole fractions of 17%–25% (x = 0.17–0.25) measured electrically by capacitance–voltage measurements indicate that ScxAl1−xN has the largest relative dielectric permittivity of any existing nitride material. Since epitaxial ScxAl1−xN layers deposited on GaN also exhibit large polarization discontinuity, the heterojunction can exploit the in situ high-K dielectric property to extend transistor operation for power electronics and high-speed microwave applications.

12 August 2024 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
CSChandrashekhar Savant
Chandrashekhar Savant
VGVed Gund
Ved Gund
KNKazuki Nomoto
Kazuki Nomoto
TMTakuya Maeda
Takuya Maeda
SJShubham Jadhav
Shubham Jadhav
DJDebdeep Jena
Debdeep Jena
We report the properties of molecular beam epitaxy deposited AlBN thin films on a recently developed epitaxial nitride metal electrode, Nb2N. While a control AlN thin film exhibits standard capacitive behavior, distinct ferroelectric switching is observed in the AlBN films with increasing Boron mole fraction. The measured remnant polarization Pr∼15μC/cm2 and coercive field Ec∼ 1.45 MV/cm in these films are smaller than those recently reported on films deposited by sputtering, due to incomplete wake-up, limited by current leakage. Because AlBN preserves the ultrawide energy bandgap of AlN compared to other nitride hi-K dielectrics and ferroelectrics, and it can be epitaxially integrated with GaN and AlN semiconductors, its development will enable several opportunities for unique electronic, photonic, and memory devices.

7 November 2022 in Applied Physics Letters
Verified
Journal Article
Open access
PDF file
SJShubham Jadhav
Shubham Jadhav
VGVed Gund
Ved Gund
BDBenyamin Davaji
Benyamin Davaji
DJDebdeep Jena
Debdeep Jena
HXHuili (Grace) Xing
Huili (Grace) Xing
ALAmit Lal
Amit Lal
This paper demonstrates a hafnium zirconium oxide (HZO)-based ferroelectric NEMS unimorph as the fundamental building block for very low-energy capacitive readout in-memory computing. The reported device consists of a 250×30 μm2 unimorph cantilever with 20-nm-thick ferroelectric HZO on 1 μm SiO2. Partial ferroelectric switching in HZO achieves analog programmable control of the piezoelectric coefficient (d31), which serves as the computational weight for multiply accumulate (MAC) operations. The displacement of the piezoelectric unimorph was recorded by actuating the device with different input voltages Vin. The resulting displacement was measured as a function of the ferroelectric programming/poling voltage VP. The slopes of central beam displacement (δmax) vs Vin were measured to be between 182.9 nm/V (for −8 Vp) and −90.5 nm/V (for 8 Vp), which corresponds to displacement proportionality constant β of 68 nm/V2 for +ve Vp and 47 nm/V2 for −ve Vp, demonstrating linear behavior of the multiplier unit. The resultant δmax from AC actuation is in the range of −18 to 36 nm and is a scaled product of Vin and programmed d31 (governed by the Vp). The multiplication function serves as the fundamental unit for MAC operations with the ferroelectric NEMS unimorph. The displacement from many such beams can be added by summing the capacitance changes, providing a pathway to implement a multi-input and multi-weight neuron. A scaling and fabrication analysis suggests that this device can be CMOS compatible, achieving high in-memory computational throughput.

1 March 2021 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
Vinaya kumar Kadayra BasavarajappaVinaya kumar Kadayra Basavarajappa
Vinaya kumar Kadayra Basavarajappa
VGVed Gund
Ved Gund
ALAmit Lal
Amit Lal
This work presents a compact ion-pump that utilizes pyroelectricity for ionization of ambient molecules. The pyroelectric ionization is realized by heating a lithium niobate (LiNbO3) crystal with low voltage resistive heating (10 V drive voltage, 0.5 W Joule heating) to generate a high voltage across the poled surface of the crystal. Pyroelectrically generated electrons from the polarized surface of the crystal are accelerated using an electric field generated by both the crystal and external titanium (Ti) electrodes biased at ±300 V, which results in the ionization of molecules in the chamber. The low collector current in the pA range ensures that the power consumed due to ionization current is lower than the LiNbO3 heating power. The ionized gas molecules are accelerated toward the Ti collector electrodes where they are implanted owing to large acceleration produced by the collector electrodes. The system is configured as a sputter pump for gettering ions to reduce chamber pressure from the baseline value of 1.4 μTorr with just the external pump to 1.1 μTorr by incorporating the LiNbO3 pump. The proof-of-concept of the pyroelectric pumping mechanism is demonstrated using a 140 cm3 stainless steel vacuum chamber, with supplementary turbomolecular and diaphragm pumps and demonstrates that a 50 s thermal cycling of the crystal is optimal for the ion-pump. Pumping action was measured with a Pirani gauge and a hot cathode ion gauge. Analytical modeling and experimental results for pumping speed calculations showed a good match during high-pressure pumping.

3 May 2018 in Journal of Microelectromechanical Systems
Verified
Journal Article
Closed access
VGVed Gund
Ved Gund
ARAlexander Ruyack
Alexander Ruyack
SASerhan Ardanuc
Serhan Ardanuc
ALAmit Lal
Amit Lal
This paper presents the design, analysis, and testing of a single-shot thermo-mechanically triggered micromachined micro-valve with graphene on a silicon nitride (Si x N y ) membrane. The graphene serves as a 2-D resistive heater for producing thermo-mechanical stress, to fracture the bilayer formed between nitride and the nickel used to make electrodes. It is demonstrated that the ability of graphene to carry much higher current density per unit than metal heaters enables high thermomechanical stress to be generated. The valve is demonstrated as an enabling component of polymer substrate-based vaporizable electronics. It is used for sealing rubidium (Rb) in polymer chambers, and then triggering and exposing it to ambient air to produce heat by exothermic oxidation. This heat energy is used to vaporize the polymers. The nominal valve tested in this work is a 750 μm × 750 μm membrane of Si x N y . An analytical and finite-element model are presented for the valve, which agree with measured membrane peak-to-peak deflection of 4.1 μm just before fracturing, and a peak fracture stress of 395 MPa. The pulsed-power for triggering the valve is nominally 142.1 ± 13.5 mW with a trigger time of 15.4 ± 3.9 ms, resulting in a very low input trigger energy of 2.2 mJ. This trigger energy is 100× lower compared with that of previously reported single-use valves in the literature.