A Ka-band high-power waveguide wide-slit antenna array with high efficiency and high-power capacity is proposed in this paper. The antenna uses a waveguide vertical transition structure as a part of the feed network, which improves the compactness and power capacity of the antenna. A 2 × 8 antenna array was simulated, fabricated by 3D printed technology, and measured. The measured reflection coefficient is less than −10 dB in the range of 30.4–30.9 GHz, the tested gain at 30.8 GHz is 25.8 dB, and the corresponding aperture efficiency is larger than 80%. This antenna can be applied in high-power millimeter-wave systems.
This paper proposes a monostatic transceiver system based on a pure waveguide structure. The designed beamforming network (BFN) and polarization direction regulators enable the system to use the same waveguide path and antenna for both transmission and reception. Furthermore, the output polarization direction can be adjusted to any arbitrary angle. Simulation results indicate that the waveguide structure provides a power capacity exceeding 500 kW. Measurements demonstrate that within the 9.85–10.15 GHz band, the system achieves a voltage standing wave ratio (VSWR) of ≤2.1, an isolation of 29–52 dB, and a gain of 14.8–16.7 dBi.
This article presents a novel tightly coupled dipole array (TCDA) with a bandwidth of 26.2:1 (VSWR < 3) across 0.20–5.23 GHz. By adding a new dual-stopband resistive frequency selective surface (RFSS) between the dipole and the floor, the short-circuit points formed by the floor at the frequency points corresponding to λ = 2 h and h are both eliminated (h is the height from the antenna to the floor). A specially integrated feed network is also applied to significantly reduce the complexity and profile height to 0.05 λlow. The simulation and experimental results show that the designed TCDA has extremely wide bandwidth, good directivity and beam scanning potential. Compared with previous designs, it greatly extends the bandwidth, improves the gain, reduces the profile height, and simplifies the feeding method.