To realize miniaturization of high-power microwave (HPM) systems, a high-efficiency GW-level relativistic magnetron (RM) operating at a relatively low applied voltage is presented, which does not require a large high-energy pulsed power source. An eight-cavity anode block with rectangular vanes is adopted. The resonators in the anode block, where the high-frequency energy is directly stored, are enlarged by introducing rectangular vanes. The microwave extraction is accomplished by a step-like diffraction output, which benefits the compact magnet system design. In experiments, several transparent cathodes have been employed to investigate the cathode effects on the magnetron performance, including cathode configurations, cathode endcaps, and emission length. With the optimal cathode, the proposed RM can radiate microwave power of 1.1 GW with a power conversion efficiency of 51% at 2.72 GHz when the applied voltage is around 380 kV and the axial magnetic field is 0.44 T.
26 January 2023 in IEEE Transactions on Electron Devices
A cross-band tunable relativistic magnetron (RM) with all-cavity axial extraction (ACAE) is presented. In this configuration, a single tuner with six sectorial metal plates is placed between the cavity and the extraction waveguide of a relativistic magnetron with all-cavity axial extraction (ACAE-RM) in the axial direction. The resonant frequency is tuned agilely by this tuner when it moves in the axial direction. Particle-in-cell (PIC) simulation results showed that this tube has a tuning range between 1.76 and 2.49 GHz, corresponding to a relative bandwidth of 34.3% about a center frequency of 2.125 GHz. A wideband horn antenna had been designed to radiate high-power microwave (HPM) in the desired frequency range for experimental research. Preliminary experimental research had been carried out that validated that the presented tunable RM has a wide tuning range. HPM oscillating from 1.79 to 2.55 GHz with power from 0.7 to 1.5 GW had been detected when the tube was tuned to specific parameters.
28 June 2021 in IEEE Transactions on Electron Devices
A compact high-efficiency GW-level ${S}$ -band relativistic magnetron (RM) with TE 11 mode output is proposed. In order to achieve high efficiency and high power, an eight-cavity slow wave system with rectangular vanes is adopted, which can provide a larger resonant system where the high-frequency energy is directly stored. All cavity axial extraction (ACAE) is applied with four 90° sector waveguides arranged azimuthally around the anode block. The four 90° sector waveguides play a significant role in converting sector waveguide TE 11 mode to circular waveguide TE 11 mode. The entire tube is designed without any increase in the radial dimension, which is propitious to a compact and lightweight magnet system design. In particle-in-cell (PIC) simulations, the proposed rectangular vane-type 8-cavity (R8) RM with ACAE can generate a microwave power of 2.1 GW with a pure TE 11 mode at the frequency of 2.475 GHz when the applied voltage is 460 kV and the axial magnetic field is 0.46 T, and the power conversion efficiency is 68.4%.
To significantly improve the electronic efficiency of coaxial multi-beam relativistic klystron amplifier (CMB-RKA), the physical process of beam-wave interaction and parameters that affect efficiency was studied. First, the high efficiency of beam-wave interaction was discussed by simulating the efficiency versus the parameters (frequency of cavity, drift tube length between cavities, and external quality factor of output cavity), in the one-dimensional (1-D) large-signal simulation software. Moreover, the further physical process of beam-wave interaction was analyzed through simulating the current modulation factor and the number of particles at the entrance of the output cavity, in the three-dimensional (3-D) particle in cell simulation software. Last, with the optimal parameters in 3-D simulations, the CMB-RKA, which has 14 electron beams with a total current of 4.2 kA (14 × 300 A), can generate an output power of 1.02 GW with a saturation gain of 55.6 dB and an efficiency of 48.7%, when beam voltage is 500 kV, which indicated the CMB-RKA can achieve high efficiency for high-power microwave radiation.
26 May 2021 in IEEE Transactions on Plasma Science
In this article, a GW-level and high-efficiency S-band eight-cavity relativistic magnetron with diffraction output (MDO) is proposed. A rectangular profile vane-type anode block is adopted to increase the volume of resonators, which leads to a promising higher output power. In particle-in-cell (PIC) simulations, the proposed eight-cavity MDO generates 2.5 GW output power with a power conversion efficiency of 70% when the applied voltage is 460 kV and the axial magnetic field is 0.44 T. The operation mode, π-mode, oscillates at 2.75 GHz. The proposed eight-cavity MDO generates an RF output power over 2 GW in a wide range of voltages and magnetic fields, which exhibits its reliable performance in π-mode.
23 April 2022 in International Journal of Antennas and Propagation
A Ka-band high-power waveguide wide-slit antenna array with high efficiency and high-power capacity is proposed in this paper. The antenna uses a waveguide vertical transition structure as a part of the feed network, which improves the compactness and power capacity of the antenna. A 2 × 8 antenna array was simulated, fabricated by 3D printed technology, and measured. The measured reflection coefficient is less than −10 dB in the range of 30.4–30.9 GHz, the tested gain at 30.8 GHz is 25.8 dB, and the corresponding aperture efficiency is larger than 80%. This antenna can be applied in high-power millimeter-wave systems.