18 November 2019 in IEEE Transactions on Information Theory
This paper analyzes the performance of discrete input distributions (coded modulation) in interference channels. This approach is motivated in part by the necessity of using coded modulation in practical systems, and in part by the potential of discrete distributions for interference alignment as well as the importance demonstrated by Dytso et al. of discrete input distributions for transmission over the $2\times 2$ interference channel when treating interference as noise. The contribution of this work includes the establishment of achievable rates subject to discrete modulations. In the process, new bounds involving the minimum distance of the sum of discrete modulations have been developed that are useful for facilitating further work in this area. These bounds are then used for finding achievable rates for $3\times 3$ interference channels. It is also shown that interference alignment can be efficiently employed with discrete modulations at finite SNR even with imperfect channel state information at the transmitter.
15 July 2021 in EURASIP Journal on Wireless Communications and Networking
Recent progress in the understanding of the behavior of the interference channel has led to valuable insights: first, discrete signaling has been discovered to have tangible benefits in the presence of interference, especially when one does not wish to decode the interfering signal, i.e., the interference is treated as noise, and second, the capacity of the interference channel as a function of the interference link gains is now understood to be highly irregular, i.e., non-monotonic and discontinuous. This work addresses these two issues in an integrated and interdisciplinary manner: it utilizes discrete signaling to approach the capacity of the interference channel by developing lower bounds on the mutual information under discrete modulation and treating interference as noise, subject to an outage set, and addresses the issue of sensitivity to link gains with a liquid metal reconfigurable antenna to avoid the aforementioned outage sets. Simulations illustrate the effectiveness of our approach.
19 May 2025 in IEEE Communications Standards Magazine
The 3rd Generation Partnership Project (3GPP) introduced the Fifth Generation (5G) New Radio (NR) in Release-15 (Rel-15). NR has continued to evolve, and Rel-18 has marked the start of 5G-advanced towards incorporating artificial-intelligence, machine-learning, extended-reality, and network-energy-efficient components. 5G-advanced has enabled NR operation in a 3 MHz channel bandwidth using a 15 kHz subcarrier spacing in frequency range 1 bands (n26, n28, n85, n100, and n106), as well as the support of sub-3MHz and sub-5MHz scenarios for band n100 which were designed to utilize less Physical Resource Blocks (PRBs) than the maximum number of PRBs available for transmitting/receiving in 3 MHz and 5 MHz channel bandwidths respectively. This enables new types of applications such as utilities, public-safety, and additional deployment flexibility for Future Railway Mobile Communication system (FRMCS). This paper provides an overview from a technical and standardization perspective of NR operating in reduced channel bandwidths including: the sync-raster design for 3 MHz channel bandwidth, a PRB-level puncturing technique applied on the Synchronization Signal Block (SSB) and Control Resource Set 0 (CORESET 0), as well as a new size for CORESET0. Evaluations are included to show the estimated performance difference between the punctured and unpunctured versions of SSB and CORESET 0, which were estimated to be ~ 4 dB for SSB and in the range from ~ 2.3 dB to ~ 2.7 dB for CORESET 0 using 2/3-OFDM symbols.