Advancements in flexible circuit interconnects are critical for widespread adoption of flexible electronics. Non-toxic liquid-metals offer a viable solution for flexible electrodes due to deformability and low bulk resistivity. However, fabrication processes utilizing liquid-metals suffer from high complexity, low throughput, and significant production cost. Our team utilized an inexpensive spray-on stencil technique to deposit liquid-metal Galinstan electrodes in top-gated graphene field-effect transistors (GFETs). The electrode stencils were patterned using an automated vinyl cutter and positioned directly onto chemical vapor deposition (CVD) graphene transferred to polyethylene terephthalate (PET) substrates. Our spray-on method exhibited a throughput of 28 transistors in under five minutes on the same graphene sample, with a 96% yield for all devices down to a channel length of 50 μm. The fabricated transistors possess hole and electron mobilities of 663.5 cm2/(V·s) and 689.9 cm2/(V·s), respectively, and support a simple and effective method of developing high-yield flexible electronics.
Patterned conformal conductive structures are used to realize flexible electronics for applications such as electronic skin, communication devices, and sensors. Thus, there is a demand for low-cost rapid fabrication techniques for flexible and stretchable conductors. Spray-coating of liquid metals is a prototyping method that is compatible with elastic substrates. In this work, UV-curable and polyimide masks were used to pattern sprayed liquid metal (LM). The effect of the spraying parameters on the thickness and conductivity of the LM was characterized. A minimum LM linewidth of 48 µm was achieved, along with a minimum gap width of 34 µm. A LM patch antenna and transmission line, which can potentially be used for communication systems, were demonstrated using this fabrication process.
5 December 2019 in IEEE Transactions on Microwave Theory and Techniques
Liquid metals such as gallium alloys have a unique potential to enable fully reconfigurable RF electronics. One of the major drawbacks for liquid-metal electronics is their interaction with solid-metal contacts, which results in unwanted changes to the electrical performance and delamination of solid-metal contacts due to atomic diffusion of gallium at the liquid-solid interface. In this article, we present a solution to this problem, namely, Laplace barriers, which demonstrate reversible liquid-metal-to-liquid-metal RF connections that provide pressure-directed control of the fluids. While the effect of these channel designs provide superior control over the fluid's position, their effect on RF transmission has not been explored, and the inherent trade space between the microfluidic design and RF performance has never been detailed. RF tunability is demonstrated by fabricating, testing, and modeling a reconfigurable RF microstrip transmission line with integrated the Laplace barriers which operates between 0.5 and 5 GHz. The effect of the Laplace barrier length on both fluidic control and RF performance is reported and compared with the extreme example of a tapered line, which is analogous to a single elongated gap between two Laplace barriers. This approach opens the potential for future all-liquid reconfigurable RF electronic circuits where physical connections between solid and liquid metals are minimized or possibly eliminated.
Gallium-based liquid metals have attracted attention as a conductive adaptable material that can be shaped to obtain reconfigurability. We demonstrate a two-dimensional array of liquid-metal conductive nodes, in which reconfigurability is achieved by merging and splitting adjacent nodes to reversibly shape a two-dimensional structure. The nodes are reconfigured using three different actuation schemes: 1) pressure-point actuation, where the liquid metal is actuated by pressing on the flexible superstrate; 2) surface-tension self-splitting, where the geometric shape of the node itself exerts a separating force on merged nodes; and 3) electrocapillary actuation where the liquid metal is actuated by a DC electrical signal. This is the first demonstration of a reconfigurable liquid-metal pixel array using liquid-liquid interconnects for prototyping reconfigurable devices. As a proof of concept, the proposed actuation techniques are used to reconfigure a liquid-metal nodal patch antenna, in which the liquid-metal nodes are reversibly connected and disconnected to change the operating frequency and polarization.
15 July 2021 in EURASIP Journal on Wireless Communications and Networking
Recent progress in the understanding of the behavior of the interference channel has led to valuable insights: first, discrete signaling has been discovered to have tangible benefits in the presence of interference, especially when one does not wish to decode the interfering signal, i.e., the interference is treated as noise, and second, the capacity of the interference channel as a function of the interference link gains is now understood to be highly irregular, i.e., non-monotonic and discontinuous. This work addresses these two issues in an integrated and interdisciplinary manner: it utilizes discrete signaling to approach the capacity of the interference channel by developing lower bounds on the mutual information under discrete modulation and treating interference as noise, subject to an outage set, and addresses the issue of sensitivity to link gains with a liquid metal reconfigurable antenna to avoid the aforementioned outage sets. Simulations illustrate the effectiveness of our approach.
In the above article [1] , Table 1 , Figs. 4 and 5, and Appendices A and B of the associated supplementary materials unfortunately contain minor errors. This article serves to correct those errors.