Anna Kuzmych

Anna Kuzmych

Auto-generated profile, based on publicly available information

Anna Kuzmych

National University of Water and Environmental Engineering, Ukraine

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2022 in Archives of Hydro-Engineering and Environmental Mechanics
Verified
Journal Article
Open access
PDF file
Lyudmyla KuzmychLyudmyla Kuzmych
Lyudmyla Kuzmych
OFOleh Furmanets
Oleh Furmanets
SUSerhii Usatyi
Serhii Usatyi
OKOleh Kozytskyi
Oleh Kozytskyi
NMNazar Mozol
Nazar Mozol
HVHalyna Voropai
Halyna Voropai
The paper focuses on research on improving the water supply of drainage systems of humid areas in the context of anthropogenic climate change. The aim of the research is to elaborate on the ways for increasing the available water supply of drainage systems and restoring active water regulation on reclaimed lands in a changing climate. Reclaimed lands are the main factor of sustainable agricultural production in Ukraine and guarantors of its stability. The area of drained lands in Ukraine is about 3.2 million hectares, including 2.3 million hectares drained with the help of closed drainage; in an area of 1.3 million hectares a two-way regulation of the soil water regime is carried out. An increase in air temperature and uneven distribution of precipitation, which has a torrential, local character in the warm period, do not allow for the e ective accumulation of moisture. The recurrence of droughts in di erent justified climatic zones of Ukraine has increased by 20–40%, which prevents sustainable agricultural production in the zone of su cient atmospheric moisture, in particular the Polesie Ecoregion. In this paper, the analysis of water consumption of reclaimed lands in the Polesie Ecoregion of Ukraine is carried out, on the examples of the drainage system “Maryanivka” and the calculation of the water supply for the corn and winter wheat.

1 October 2023 in Materials Research Express
Verified
Journal Article
Open access
AOAnatoliy Onanko
Anatoliy Onanko
Lyudmyla KuzmychLyudmyla Kuzmych
Lyudmyla Kuzmych
YOYurii Onanko
Yurii Onanko
AKAnna Kuzmych
Anna Kuzmych
The simultaneous influence of hydrogen H and ultrasound deformation on internal friction Q −1 and dynamic elastic modulus E of intermetallic Ti3Al alloy after cutting and polishing were studied. The relaxation maximum of internal friction Q −1 M1 at temperature Т М1 ≈ 398 К, conditioned by the mechanism caused by reorientation interstitial atoms in dumbbell configurations H-H was discovered. Internal friction maximum Q −1 M2 in intermetallic Ti3Al at temperature T M2 ≈ 439 K was discovered with an activation energy H 2 = 0.86±0.1 eV. 2D and 3D atomic force microscopy microstructure images of Ti (VT8) alloy after mechanical and thermal treatment are presented. Strengthening of Ti alloys is related to the cooperation of dislocations with point defects.

1 April 2024 in ECS Journal of Solid State Science and Technology
Verified
Journal Article
Closed access
YOYurii Onanko
Yurii Onanko
Lyudmyla KuzmychLyudmyla Kuzmych
Lyudmyla Kuzmych
AOAnatoliy Onanko
Anatoliy Onanko
PIPeter Il’iN
Peter Il’iN
AKAnna Kuzmych
Anna Kuzmych
In this work, after electron irradiation and X-ray, the outcomes of the evaluation dynamic characteristics of interstitial atoms Si j , vacancy V, and O-complexes were evaluated to account for the annealing conditions to derive specific structural defects in the SiO2/Si wafer. A non-destructive method, which allows the determination of the internal friction difference ΔQ −1 /Q −1 0 of the elastic vibration of structural defects of dislocations with density N D and the depth of the broken layer h b , is offered for the SiO2/Si wafer. The method was developed, the installation was designed and manufactured for the excitation and registration of damped bending resonant oscillations in a SiO2/Si disc-shaped wafer with a thickness h SiO2 ≈ 100 nm, h is = 300 ÷ 500 × 103 nm, and diameter D = 60 ÷ 100 × 10−3 m to measure the structurally sensitive internal friction Q −1 in vacuum P ≈ 10−2 Pa. Measurement of the internal friction background Q −1 0 at harmonic frequencies f 0 and f 2 allowed us to experimentally determine the nodal lines of the oscillating disks.

28 August 2023 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
YOYurii Onanko
Yurii Onanko
DCDmytro Volodymyrovych Charnyi
Dmytro Volodymyrovych Charnyi
AOAnatoliy Petrovich Onanko
Anatoliy Petrovich Onanko
EMEugene Michaylovich Matseliuk
Eugene Michaylovich Matseliuk
ODOksana Petrivna Dmytrenko
Oksana Petrivna Dmytrenko
AKAnna Andriivna Kuzmych
Anna Andriivna Kuzmych
Introduction The electrophysical properties of semiconductor devices significantly depend on the perfection of their structure. It is necessary to control the structure of semiconductor wafer-plates disks in the manufacture of large integrated circuits (LIC). Technique was developed and device was made that allows to obtain the information about structural defects in such disks by attenuating elastic oscillations Q-1 to study the defects density nd and the depth hd of their propagation. Defect annealing leads to change in the shape of internal friction (IF) temperature spectrum Q-1(T) [1]. IF method allows to set the spectrum of structural defects on the analysis of positions of maximums IF, on duration of relaxation time τ and on their deposit in attenuation of elastic vibrations [2]. A non-destructive method for the technological control of the structure defects by measuring internal friction (IF) and elastic modulus E after laser radiation was developed. Experimental procedure Ultrasonic (US) pulse-phase method using USMV-LETI, modernized USMV-KNU and computerized “KERN-4” with frequencies f║ ≈ 1 MHz and f┴ ≈ 0,7 MHz, US invariant-polarization method for determining the effective acoustic μil and elastic constants Cijkl were used [3,4,5]. The measured velocity error was equal to ΔV/V = 0.5÷1,5%. The study of influence of structure defects on damping of vibrations in Si/SiO2 wafer-plates by the diameter of D = 100÷60 mm and by the thickness of hSiO2 ≈ 600 nm, hSi ≈ 470 000 nm, allows to estimate the degree of perfection of crystalline structure. Metallography optical supervision of microstructure by means of the microscope ”LOMO MVT”, atomic-force microscopy (AFM) were used. Results and discussion The quasi-longitudinal US velocity V║[001] = 5870 m/s, elastic modulus E001 = ρV║[001] 2 = 80,28 GPa for SiO2/Si from the oscillogram were determined. Temperature dependence of internal friction Q-1(T) in SiO2/Si wafer-plate p-type, doped with B, KDB-7.5(100) diameter D ≈ 76∙10-3 m, thickness hSi ≈ 460∙103 nm with SiO2 layer thickness hSiO2 ≈ 100 nm after X-ray irradiation with dose Dγ ≈ 102 Gy is showed. Conclusions It was found that as the result of the structural defect annealing IF background Q0 -1 significantly decreases during measuring of IF temperature dependence Q-1(T), which indicates the improvement of SiO2/Si crystal structure. The elastic modulus Е, the shear modulus G, Poisson coefficient μ, IF Q-1 are dependent from SiO2/Si wafer-plate anisotropy. The value of IF background Q-1 0 after temperature T, mechanical treatments describes the changes of the elastic stress σi fields in SiO2/Si wafer-plate. The study of vibrations of disk wafer-plate Si/SiO2 at different harmonic frequencies f0, f2 made it possible to develop the technique for determining the structural defects density nD for semiconductor wafers-substrates. The relationship between IF Q-1 value, the logarithmic decrement of ultrasound damping δ and the dislocations density nD was established for disk-shaped semiconductor wafers-substrates. Acknowledgements This work has been supported by Ministry of Education and Science of Ukraine: Grant of the Ministry of Education and Science of Ukraine for perspective development of a scientific direction "Mathematical sciences and natural sciences" at Taras Shevchenko National University of Kyiv. References [1] Golovin I. S. 2012 Internal friction and mechanical spectroscopy of metal materials (Moscow: Publishing company MISIS). [2] Shpak A. P., Kunickiy Y. A. and Karbovskiy V. L. 2001 Cluster and nano structural materials (Kyiv: Academy periodicals). [3] Korobiichuk, I., Kuzmych, L., Kvasnikov, V. 2020 The system of the assessment of a residual resource of complex technical structures. MECHATRONICS 2019. Advances in Intelligent Systems and Computing. 1044, 350–357. DOI: https://doi.org/10.1007/978-3-030-29993-4_43 [4] Onanko A. P., Kuryliuk V. V., Onanko Y. A. et al. 2020 Peculiarity of elastic and inelastic properties of radiation cross-linked hydrogels. J. Nano- Electron. Phys. 12, № 4, 04026(5). DOI: https://doi.org/10.21272/jnep.12(4).04026 [5] Onanko A. P., Kuryliuk V. V., Onanko Y. A. et al. 2021 Features of inelastic and elastic characteristics of Si and SiO2/Si structures. J. Nano- Electron. Phys. 13, № 5, 05017(5). DOI: https://doi.org/10.21272/jnep.13(5).05017 Figure 1

19 May 2023 in ECS Transactions
Verified
Journal Article
Closed access
YOYurii Onanko
Yurii Onanko
DCDmytro Volodymyrovych Charnyi
Dmytro Volodymyrovych Charnyi
AOAnatoliy Petrovich Onanko
Anatoliy Petrovich Onanko
EMEugene Michaylovich Matseliuk
Eugene Michaylovich Matseliuk
ODOksana Petrivna Dmytrenko
Oksana Petrivna Dmytrenko
AKAnna Andriivna Kuzmych
Anna Andriivna Kuzmych
In this work, after X-ray and electron irradiation, the outcomes of the evaluation dynamic characteristics of interstitial atoms Sij , vacancy V, and O-complexes were evaluated to account for the annealing conditions to derive specific structural defects in the SiO2/Si wafer. A non-destructive method, which allows the determination of the internal friction difference ΔQ-1/Q-1 0 of the elastic vibration structure defect density Nd and the depth of the broken layer hb , is offered for the SiO2/Si wafer. The method was developed, the installation was designed and manufactured for the excitation and registration of damped bending resonant oscillations in a SiO2/Si disc-shaped wafer with a thickness hSiO2 ≈ 100 nm, his = 300÷500×103 nm, and diameter D = 60÷100×10-3 m to measure the structurally sensitive internal friction Q-1 . Measurement of the internal friction background Q-1 0 at harmonic frequencies f0 and f2 allowed us to experimentally determine the nodal lines of the oscillating disks.

27 November 2024
Verified
Book Chapter
Closed access
SGSergii Gromachenko
Sergii Gromachenko
ARAnatoliy Rokochinskiy
Anatoliy Rokochinskiy
PVPavlo P. Volk
Pavlo P. Volk
Lyudmyla KuzmychLyudmyla Kuzmych
Lyudmyla Kuzmych
NPNataliia Prykhodko
Nataliia Prykhodko
AKAnna Kuzmych
Anna Kuzmych
The scientific research has been conducted and the methodological approaches to leachate volume estimation based on improved water-balance calculations; sorptive ameliorant application rate estimation as an integral characteristic of multicomponent value; substantiation of type, construction, and parameters of drainage-accumulation networks have been developed. The technological schemes of land-reclamation measures realization at the stage of project, exploitation, and conservation are worked out and their environmental and economic efficiency has been proved in production conditions.