1 May 2021 in Physics of Plasmas
In this tutorial article, we review the technological, physics, and economic basis for a magnetic fusion device utilizing a flowing liquid lithium divertor (molten metal velocity in the range of cm/s) and operating in a low-recycling plasma regime. When extrapolated to magnetic fusion reactor scale, the observed effects of a liquid lithium boundary on recycling reduction, confinement increase, and anomalous heat transport mitigation may offer a fundamentally distinct and promising alternative route to fusion energy production. In addition, this lithium-driven low recycling regime could accelerate fusion's commercial viability since such a device would be smaller, dramatically decreasing plant and electricity costs if all technological complexities are solved. First, the theoretical basis of the energy confinement and fusion performance as well as the related possibilities of low recycling regimes driven by flowing lithium plasma-facing components are reviewed. Then the paper emphasizes the technological obstacles that need to be overcome for developing the necessary systems for such a flowing liquid lithium solution at reactor scale and details how many of these have been overcome at laboratory and/or proof-of-concept scale. Finally, the current and planned scientific and engineering endeavors being performed at the University of Illinois at Urbana-Champaign regarding this alternative reactor option are discussed.
26 March 2014 in Journal of Manufacturing Science and Engineering
For successful commercial adaptation of the μ-EDM (micro electro-discharge machining) process, there is a need to increase the process efficiency by understanding the process mechanism. This paper presents a model of the plasma discharge phase of a single discharge μ-EDM event in deionized water. The plasma discharge is modeled using global model approach in which the plasma is assumed to be spatially uniform, and equations of mass and energy conservation are solved simultaneously along with the dynamics of the plasma bubble growth. Given the input discharge voltage, current and the discharge gap, complete temporal description of the μ-EDM plasma during the discharge time is obtained in terms of the composition of the plasma, temperature of electrons and other species, radius of the plasma bubble and the plasma pressure. For input electric field in the range of 10–2000 MV/m and discharge gap in the range of 0.5–20 μm, time-averaged electron density of and time-averaged electron temperature of 11,013–29,864 K are predicted. Experimental conditions are simulated and validated against the spectroscopic data from the literature. The output from this model can be used to obtain the amount of heat flux transferred to the electrodes during the μ-EDM process.
13 March 2019 in Scientific Reports
In this study, the effect of the plasma treatment on corn seeds is investigated. Corn seeds were treated uniformly without burning or blackening by three kinds of plasma apparatus: RF plasma in vacuum, microwave-driven atmospheric-pressure plasma, DBD atmospheric-pressure plasma, and two other treatments: vacuum exposure only, and using plasma-activated water in the seed coating process, to investigate growth rate changes under realistic conditions. Each treatment was performed on a total of 1512 corn seeds. Seeds from each experimental condition were treated with the recommended rate of Poncho/VOTiVO with Acceleron, a commercial biological seed treatment that helps to protect the seeds from fungus, insects, and nematodes after planting. The 1512 seeds were divided evenly into three replications with 84 seeds planted for each replication at six unique locations across central Illinois. The results for germination, growth, and product yield over the 2017 growing season is presented. Overall no statistically significant difference in the yield of corn harvested was found between the control and any of the five treatments. This is likely due to the already near-100% germination rate of the corn hybrid used in the study and the use of the Poncho/VOTiVO protective coating on every sample.
3 June 2024 in Journal of Vacuum Science & Technology B
Low-temperature plasmas (LTPs) are essential to manufacturing devices in the semiconductor industry, from creating extreme ultraviolet photons used in the most advanced lithography to thin film etching, deposition, and surface modifications. It is estimated that 40%–45% of all process steps needed to manufacture semiconductor devices use LTPs in one form or another. LTPs have been an enabling technology in the multidecade progression of the shrinking of device dimensions, often referred to as Moore’s law. New challenges in circuit and device design, novel materials, and increasing demands to achieve environmentally benign processing technologies require advances in plasma technology beyond the current state-of-the-art. The Department of Energy Office of Science Fusion Energy Sciences held a workshop titled Plasma Science for Microelectronics Nanofabrication in August 2022 to discuss the plasma science challenges and technical barriers that need to be overcome to continue to develop the innovative plasma technologies required to support and advance the semiconductor industry. One of the key outcomes of the workshop was identifying a set of priority research opportunities (PROs) to focus attention on the most strategic plasma science challenges to address to benefit the semiconductor industry. For each PRO, scientific challenges and recommended strategies to address those challenges were identified. This article summarizes the PROs identified by the workshop participants.
1 June 2015 in Journal of Manufacturing Science and Engineering
This paper presents a micro-electrodischarge machining (EDM) melt-pool model to predict workpiece (anode) material removal from a single discharge micro-EDM process. To model the melt-pool, heat transfer and fluid flow equations are solved in the domain containing dielectric and workpiece material. A level set method is used to identify solid and liquid fractions of the workpiece material when the material is molten by micro-EDM plasma heat flux. The plasma heat flux, plasma pressure and the radius of the plasma bubble have been estimated by a micro-EDM plasma model and serve as inputs to the melt-pool model to predict the volume of material removed from the surface of the workpiece. Experiments are carried out to study the effect of interelectrode voltage and gap distance on the crater size. For interelectrode voltage in the range of 200–300 V and gap distance of 1,2 μm, the model predicts crater diameter in the range of 78–96 μm and maximum crater depth of 8–9 μm for discharge duration of 2 μs. The crater diameter values for most of experimental craters show good agreement with the simulated crater shapes. However, the model over-predicts the crater depths compared to the experiments.
1 January 2011 in Journal of Vacuum Science & Technology A
Modulated pulse power (MPP) technology is a derivative of high power pulsed magnetron sputtering that allows unprecedented user control over the growth process, although the critical time-dependent plasma properties during the power pulse have not been studied until now. Using a MPP plasma generator, pulses of custom voltage waveforms were generated and applied to the cathode of a 36 cm diameter circular planar magnetron. The I-V characteristics of the pulses are separable into distinct discharge stages. A time-resolved triple Langmuir probe was introduced to measure the temporal evolution of the plasma. Typical electron density of 5×1017 m−3 and electron temperature of 10 eV during the pulse were calculated from measured parameters. Plasma behaviors were observed to closely depend on the pulse waveforms. Various parameters, including pulse current, pulse frequency, pressure, and distance from the target, also affected the electron density and temperature, providing degrees of freedom to optimize the sputtering processes. The effects of each parameter on the pulsed plasma dynamics are discussed and then attributed to mechanisms of electron impact ionization, gas heating, and magnetic confinement.