For the investigation of spin crossover (SCO) complexes by x-ray absorption spectroscopy (XAS) measurements in the tender to hard x-ray regime, a transmission heating cell has been developed. Some SCO complexes show a spin transition at certain temperatures above room temperature (RT). To measure a reliable hysteresis curve, high temperature stability (preferably <0.5 °C) as well as minimal overheating of the setpoint temperatures (<1 °C) has been achieved. The cell is designed for use in our von Hámos XAS laboratory spectrometer. The SCO complex [Fe(bzimpy)2](ClO4)2 · 0.25H2O was investigated as a first proof-of-principle experiment. In situ measurements up to 250 °C were carried out, showing the characteristic spin transition of the SCO complex during heating. Further XAS measurements were conducted at beamline BL10 of the DELTA storage ring, which demonstrated the feasibility of in situ measurements during a continuous temperature ramp with our heating cell. The current temperature limit of the cell is 500 °C when used in vacuum. Hence, the cell can also be used for other sample systems, such as thermoelectric materials, which are frequently investigated in this temperature regime.
Method development for laboratory-based X-ray microscopes operating in the water-window range invariably involves the development of the X-ray source as well. This paper presents major upgrades to the laboratory soft X-ray microscope (L-TXM) plasma chamber and data analysis protocol. Characterization of the laser-plasma source demonstrates improved performance, while a proof-of-principle tomogram of a diatom showcases a robust data treatment protocol and the system's capabilities for three-dimensional imaging and segmentation. These developments mark significant progress toward making L-TXM a more robust and user-friendly tool for soft X-ray microscopy applications.
A gas cell for in-situ measurements of Volatile Organic Compounds (VOCs) and their adsorption behavior on different surfaces by means of X-Ray Fluorescence (XRF) and X-ray Absorption Fine-Structure (XAFS) spectroscopy has been developed. The cell is especially designed to allow for the efficient excitation and detection of low-Z elements such as carbon, oxygen or nitrogen as main components of VOCs. Two measurement modes are available. In the surface mode, adsorption on a surface can be studied using XAFS by fluorescence detection under shallow angles of incidence. The transmission mode enables the simultaneous investigation of gaseous samples via XAFS in transmittance and fluorescence detection modes. Proof-of-principle experiments were performed at the PTB plane grating monochromator beamline for soft x-ray radiation at the synchrotron radiation facility BESSY II. The flexible design and high versatility of the cell are demonstrated with the investigation of ethanol (EtOH) as one of the most abundant VOCs. The comparison of Near-Edge X-ray Absorption Fine-Structure (NEXAFS) spectra under transmission and fluorescence detection in the gas phase with measurements of adsorbed molecules on a Si-wafer surface both at the C and O-K absorption edges proves the applicability of the cell for the monitoring of adsorption processes.
An operando, chemistry-resolved approach is presented for the quantitative analysis of sodium transport and speciation in hard carbon anodes during electrochemical cycling. By combining Na K-edge X-ray absorption spectroscopy with reference-free X-ray fluorescence analysis, absolute, SI-traceable sodium inventories and species-resolved sodium concentrations are determined directly under operando conditions without calibration standards. Reference spectra of relevant sodium compounds were acquired and used for spectral deconvolution, enabling quantitative determination of Na-containing interphase and conversion products. Focusing on the first galvanostatic cycle, the methodology resolves distinct sodiation and desodiation regimes characterized by different sodium uptake and release rates. The operando measurements reveal the evolution of individual sodium species and distinguish reversible sodium storage from irreversible sodium immobilization within the electrode. By directly linking electrochemical performance to localized sodium inventories and chemical speciation, the approach establishes a quantitative operando framework for mechanistic studies, material optimization, and future sodium-ion battery development.