15 February 2022 in IEEE Transactions on Transportation Electrification
Under the pressure of climate change and the energy crisis, electric vehicles (EVs) have experienced a marked growth in many countries recently. However, the environmental benefits of EVs cannot be achieved if the charging power from the electricity grid is still mainly provided by fossil-fueled power plants. How to construct a low-carbon fast-charging system has become an emerging research topic. In this context, a novel carbon-oriented expansion planning model of the integrated electricity and natural gas system (IEGS) with EV fast-charging stations (FCSs) is proposed to determine the optimal alternatives, locations, and sizes for ecofriendly candidate assets, including roof-top photovoltaic (PV) panels and fuel cell (FC) units in each FCS, as well as renewable energy units and carbon capture and storage (CCS) systems in IEGS. To guarantee the carbon reduction performance of the planning scheme, the carbon emission cap of the EV charging system is specified by the planner and optimally allocated among multiple FCSs according to their carbon reduction abilities. Furthermore, the proposed model can not only consider the initial investment and operation costs but also take into account the expected adaptation cost to future scenarios that are generated in line with three uncertainties, namely, the traffic flow levels, conventional load levels, and renewable-based power generation levels. Finally, the proposed expansion planning method is illustrated by conducting numerical experiments in case studies.
2 April 2020 in IEEE Transactions on Industrial Informatics
Successful detection of false data injection attacks (FDIAs) and removal of state bias due to FDIAs are essential for ensuring secure power grids operation and control. This paper first extends the approximate dc model of FDIA to a more general ac model that can handle both traditional and synchronized measurements. To automatically filter out the established FDIAs, we propose a state reconstruction scheme consisting of a contaminated state separation method, an enhanced bad data identification approach and a state recovery algorithm. In this scheme, a classifier is developed by aggregating a series of extreme learning machines (ELMs) to detect anomaly states caused by FDIAs. Gaussian random distribution and Latin hypercube sampling are adopted to initialize the input weights of base ELMs, which can provide more diversities to enhance the ensemble performance. Then, to identify the exact locations of the compromised measurements, a state forecasting-based bad data identification approach is proposed by exploiting the consistency between the forecasted and the received measurements. Finally, an effective state recovery algorithm applies quasi-Newton method and Armijo line search to address the possible system unobservable problem due to the removal of attacked measurements. Numerical tests on serval IEEE standard test systems verify the efficiency of the proposed FDIA model and state reconstruction scheme.
28 September 2021 in IEEE Transactions on Industry Applications
As an emerging energy carrier, hydrogen presents a potential opportunity to increase the flexibility and resiliency of the integrated power and transportation system having ultrahigh penetration of renewable generation. This article studies a conceptual integrated energy-mobility system (IEMS) based on renewable-to-hydrogen stations (RHSs) and tank truck fleets. In an RHS, the renewables power the grid while also charge a hydrogen energy storage unit that can perform power-to-hydrogen (P2H) and hydrogen-to-power (H2P) operations. Besides, using tank truck fleets, the RHS will distribute its surplus hydrogen products to local consumers, e.g., refueling stations serving hydrogen fuel cell vehicles. The operation framework of the IEMS is analyzed. And some preprocessing technologies are developed to reduce modeling complexity. Then, a joint optimal scheduling model, involving renewable generationcontract, P2H, and H2P of the RHS, hydrogen product demands of the local consumers, and vehicle routing problem (VRP) of the truck fleets, is established. Afterwards, the formulated problem is solved by a heuristic method based on the exhaustive search and genetic algorithm. Numerical results verify the effectiveness of the joint optimal scheduling model and illustrate that the IEMS has the potentials to promote hydrogen-integrated transportation and power systems.
5 February 2024 in IEEE Transactions on Smart Grid
This paper proposes a coordinated emergency response scheme for the secure operation and mutual coordination of electricity-watershed networks under spatio-temporal heterogeneity and volatility of rainstorms. The risk interdependencies of water flooding and power outages across power distribution networks (PDNs) and watershed networks (WSNs) are formulated, and a rainstorm-triggered failure model is proposed to quantify the potential spatio-temporal outage risk of PDNs and WSNs. A hyperplane transformation based partition method is developed to extract the uneven spatial distribution and temporal variability of rainfalls. Then, a coupled electricity-watershed network model derived from Saint-Venant partial differential equations (PDEs) is formed to describe the load flow of PDNs and nonuniform hydrodynamic processes of WSNs under compounding impacts of rainstorm variability and failure occurrences. Furthermore, an optimal joint scheduling strategy is proposed to coordinate the dynamic PDN reconfiguration and WSN pump cluster drainage. In order to reduce the computational burden of original PDE-constrained emergency optimization problem, a progressive hedging-based accelerated solution algorithm combined with multiple equivalent linearization techniques is presented. Comparative results have demonstrated the effectiveness of the proposed scheme in reducing load shedding and mitigating flood damage losses.
6 August 2020 in IEEE Access
With the exponential growth of information and communication technology, the traditional power system is gradually evolving into a cyber physical energy system (CPES) with frequently interactions between physical and cyber components. CPES indeed revolutionize the power grid efficiency and operational performance, but it also gives rise to new security challenges, causing catastrophic consequences in power system. Therefore, this paper proposes a new false data injection attack (FDIA) detection mechanism to automatically recognize the intrusions and thereby improve the cybersecurity of CPES. In this mechanism, a two-stage FDIA model is developed to generate training dataset for the machine learning-based detector, and an extreme gradient boosting (XGBoost) classifier is meticulously designed by combining with active learning and Bayesian optimization techniques to improve training efficiency and model performance respectively. The proposed FDIA defense strategy can properly extract the nonstationary and nonlinear attacking features and thus locate the biased states with a high accuracy. The obtained numerical results on the standard IEEE 14-, 57- and 118-bus systems highlight the destructive effects of the developed two-stage FDIA and comprehensively demonstrate the effectiveness of the proposed FDIA detection mechanism.
28 February 2023 in IEEE Transactions on Intelligent Transportation Systems
Promotion of charging facilities (CFs) can ameliorate range anxiety and facilitate long-distance travel by electric vehicles (EVs). In this context, a multistage low-carbon EV CFs planning model is proposed in this paper for the coupled transportation and power systems. This model not only takes into account the construction costs of newly-built CFs and their adverse impacts on the distribution system, but also considers the carbon emissions of CFs and the penalty due to the inconvenience for EVs to be recharged. In addition, a rational travel route choice model is significantly important to accurately evaluate the service capability of CFs to be constructed and thereby to obtain an optimal CF planning result. Therefore, a novel travel route choice model developed in this work allows EV drivers to take detours according to the CF locations to charge their EVs multiple times and then finish their trips. Carbon emission flow (CEF) model is innovatively employed to precisely calculate CFs’ carbon emission amount from the perspective of consumption side. Subsequently, uncertainties involved in CF planning, i.e., distribution and growth rate of traffic flow and electric load, popularity of different types of EVs, as well as location of the connected node of clean electricity, are fully considered to obtain a robust CF planning scheme that can achieve a good performance in the current stage and exhibit robustness for the uncertainties in the future stage. Finally, numerical experiments are conducted to verify the effectiveness of the proposed model. The impacts of future carbon price and EV cruising range on the planning results are also comprehensively evaluated.