The sustained development of computational power continues to promote the use of distributed inelasticity fiber frame models. The current article presents a comprehensive application and discussion of state-of-the-art formulations for the nonlinear material response of reinforced concrete structures. The broad character of the study is imparted by the joint analysis of the effects of the type of formulation (displacement based versus force based), sectional constitutive behavior (hardening versus softening response), and numerical integration parameters (such as quadrature method, mesh definition, or number of integration points). Global and local responses are assessed, along with a critical review of existing regularization techniques. An experimentally tested cantilever is used to conduct the study and illustrate the previous features. The example shows that the convergence of displacement-based meshes under objective response can be much slower than what preceding studies indicate, unlike their force-based counterpart. Additionally, the physical interpretation of the local response under softening behavior supports the proposal of a novel regularization scheme for displacement-based elements, validated through comparison against experimental results.
12 October 2015 in Bulletin of Earthquake Engineering
The present data paper describes an experimental campaign on five thin T‐shaped reinforced concrete walls (DOI: 10.6084/m9.figshare.3490754.v2), which includes: details on the test units, materials, test setup, loading protocol, instrumentation, main features of each unit's response, organization of the provided test data, and examples of derived data. The tests aimed at assessing the influence of wall thickness on member stability, the role of lap splices on damage distribution and displacement ductility, and the effects of the simultaneous application of out‐of‐plane loading on the member response. A set of five companion test reports, one for each of the tested units, are included in the data set and supplement the present manuscript.
2 November 2014 in Archives of Computational Methods in Engineering