Objective assessment of the seismic response of engineering systems is achievable through estimating the rate of exceedance (risk) of the engineering‐demand parameters (EDPs), which are usually obtained by performing dynamic analyses with incrementally scaled seed ground motions. However, assigning rates of occurrence to such EDPs is difficult because the input ground motions are inconsistent with those that go into the hazard estimation. The Conditional Scenario Spectra (CSS) are a set of realistic ground‐motion spectra with assigned rates of occurrence that reproduce the hazard at a site over various hazard levels and over a period range. The CSS methodology is an improvement over the CS method in that it includes the additional step of adjusting the rates to ensure the consistency of the target hazard. In this article, a step‐by‐step procedure for estimating the CSS is presented. The analysis of a structural system illustrates the uses of the CSS set for assessing EDPs over a wide range of demand intensity so that the estimation of the risk of these EDPs can be accomplished with ease.
1 January 2019 in Construction and Building Materials
The response of mid‐rise reinforced concrete (RC) buildings in Mexico City after the 2017 Puebla Earthquake is assessed through combined field and computational investigation. The Mw 7.1 earthquake damaged more than 500 buildings where most of them are classified as mid‐rise RC frames with infill walls. A multinational team from Colombia, Mexico, and the United States was rapidly deployed within a week of the occurrence of the event to investigate the structural and nonstructural damage levels of over 60 RC buildings with 2–12 stories. The results of the study confirmed that older mid‐rise structures with limited ductility capacity may have been shaken past their capacity. To elucidate the widespread damage in mid‐rise RC framed structures, the post‐earthquake reconnaissance effort is complemented with inelastic modeling and simulation of several representative RC framing systems with and without masonry infill walls. It was confirmed that the addition of non‐isolated masonry infills significantly impacts the ductility capacity and increases the potential for a soft‐story mechanism formation in RC frames originally analyzed and designed to be bare systems.