18 June 2020 in IEEE Transactions on Computer-Aided Design of Integrated Circuits and Systems
Power consumption constitutes a major challenge for electronics circuits. One possible way to deal with this issue is to consider it very soon in the design process in order to explore various design choices. A typical design flow often starts with a high-level description of a full system, which imposes to provide accurate models. Power modelling techniques can be employed, providing a way to find a relationship between power and other metrics. Furthermore, it is also important to consider efficient power characterization techniques. The role of this paper is, first, to provide an overview of RTL to transistor level power modelling and estimation techniques for FPGAs and ASICs devices. Second, it aims at proposing a classification of all approaches according to defined metrics, which should help designers in finding a particular method for their specific situation, even if no common reference is defined among the considered works.
31 July 2020 in IEEE Open Journal of the Communications Society
Ambient backscatter communication is an emerging and promising low-energy technology for the Internet of Things. In such a system, a tag sends a binary message to a reader by backscattering a radio frequency signal generated by an ambient source. The tag can operate without battery and without generating additional radio waves. However, the tag-to-reader link suffers from the source-to-reader interference. In this paper, we propose a polarization-based reconfigurable antenna in order to improve the robustness of the tag-to-reader link against the source-to-reader direct interference. More precisely, we compare different types of tags' antennas, different tags' encoding schemes, and different detectors at the reader. By using analysis, numerical simulations, and experiments, we show that a polarization-based reconfigurable tag with four polarization directions significantly outperforms a non-reconfigurable tag, and provides almost the same performance as an ideal reconfigurable tag with a large number of reconfigurable polarization patterns.
6 September 2013 in IEEE Photonics Technology Letters
In this letter, a novel linear frequency-domain compensation (FDC) of the resonant cavity light emitting diode (RC-LED) for discrete multi-tone (DMT) modulation has been used for the first time in the nonlinearity mitigation of step-index polymer optical fiber (SI-POF) communication systems. The proposed FDC method can be easily implemented in any multi-carrier communication system. Compared with the classical DMT scheme, FDC DMT benefits from higher power efficiency in terms of clipping for peak-to-average power ratio reduction. Two SI-POF experimental setups with different 3 dB POF bandwidths are built with the same RC-LED. Under the same experimental conditions, a higher transmission rate has been achieved with the proposed FDC DMT method compared with classical DMT at the same bit error rate level.
4 February 2022 in IEEE Photonics Journal
In this paper, we study different modulation techniques for visible light communication (VLC), taking illumination constraints into account. Two modulation schemes are compared, namely pulse amplitude modulation (PAM) and carrierless amplitude and phase (CAP) modulation, through both simulations and experimental measurements. The data link under study is based on low-cost components comprising a white light-emitting diode (LED) and a silicon PIN photodiode. Moreover, the proposed VLC system complies with illumination standards and limits the brightness level to that of a typical office room. The impact of the roll-off factor parameter, which is directly related to the total occupied bandwidth, and the maximum achievable throughput for PAM and CAP are studied. Moreover, adaptive postdistortion based on a Volterra series expansion is implemented to mitigate the effects of LED nonlinearity in practice. We also demonstrate that 8-PAM can outperform 64-CAP and discrete multitone (DMT) when the LED nonlinearity is adequately compensated.
31 May 2015 in Wireless Personal Communications