24 November 2017 in Gornyi Zhurnal
The article presents the results of the theoretical and experimental research aimed at development and testing of new classes of complexing agents – collectors and modifiers for recovery of precious metals from rebellious gold- and platinum-bearing ore. The topicality of the task to create new effective domestic reagents lies in the complete extractability of gold, platinum and other precious metals to concentrates at reduced loss with the tailings. The theoretical framework of the development of new collecting agents for flotation of gold- and platinum-bearing minerals is their ability to generate sustainable compounds with gold and platinum during flotation. Aiming to study processes of physical and chemical effects of flotation agents on micro- and nanosize spots of gold and platinum on the surface of sulfides, original procedures of production of mineral aggregates containing “invisible” or submicron gold and platinum are put forward. The experimental research of the interaction between the modified collectors – diethyl dithiocarbamate DEDC, diisobytul dithiophosphinate DIPH and dithiazine MTKH – and the surface of precious-bearing minerals is implemented using the methods of UV- and IR-spectroscopy (UV-1700 Shimadzu and InfraLUM FT-8), scanning electron (LEO 1420VP INCA Oxford 350) and laser (KEYENCE VK-9700) microscopy and H-ray phase analysis (X-ray diffractometry). Conditions of formation of an adsorption layer on minerals are determined, and it is demonstrated that components of the modified reagents are selectively adsorbed on micro- and nanosize gold and platinum and ensure their enhanced recovery under flotation. The new data obtained allow scientific validation of efficiency of ecologically safe vegetable modifies of sulfide minerals and plant sorbent for fine gold during extraction of goldbearing concentrates from complex ore by flotation. A new class of flotation agents has been proposed and scientifically justified – thermomorphic polymers with functional groups for fine gold flocculation and flotation. Scaled-up laboratory tests of the new reagents show that their joint application with butyl xanthate ensures the increased quality of the concentrates in terms of gold content by 1.5–1.7 times and the higher gold recovery by 1.5–5%.The studies have been supported by Academician Chanturia School, Grants Nos. NSH-3184.2010.5; NSH-220.2012.5; NSH-748.2014.5.
27 July 2018 in Tsvetnye Metally
27 October 2017 in Obogashchenie Rud
The results of the experimental study of physicochemical properties of chalcopyrite, galena, arsenopyrite, pyrite and cassiterite, as components of lode tin ores, following their surface modification by stable metal-dibutyldithiocarbamate complexes (DBDTC), are presented. DBDTC was selected as a strong sulphydric collector, possessing complexing properties with respect to copper, lead, silver and other non-ferrous and noble metals, for application in bulk flotation of sulfide minerals, as components of complex tin ores, with a view to prevent transfer of sulfides into tin concentrate. By means of the methods of analytical scanning electron microscopy ASEM (LEO 1420VP INCA Oxford Energy 350) and laser microscopy (Keyence VK-9700), through measurements of electrode potentials of mineral polished sections by potentiometric titration method and with the help of monomineral flotation, individual character of DBDTC adsorption layer formation on chalcopyrite, galena and arsenopyrite surface has been established, reagent’s films dimensions and their attachment strength have been determined. It is noted, that cassiterite indifference to DBDTC provides for its selective separation into sands product in sulfides flotation. It is shown, that sulfides surface modification by stable metal-dibutyldithiocarbamate complexes increases their recovery into bulk sulfide concentrate in lode tin ores flotation.The studies were performed with the aid of the Russian Science Foundation Grant (Project No. 17-17-01292).
1 July 2015 in Inżynieria Mineralna
The results of experimental studies of the adsorption and flotation characteristics of herbal extracts which are produced from the leaves and stems of widely spread heracleum plant (HSE) and oak bark (OBE) are presented. Depending on flotation conditions – pH, plant extract concentration and the order of modifier and collector addition, the possibility of improvement of the quality of Cu and Au concentrates is discussed and the dominating factors of plant modifiers behavior in flotation process are defined. It was identified that tannin and plant extracts OBE may form stable insoluble complex compounds with Fe (III) on the surface of pyrrhotite and arsenopyrite which help to hydrophilize mineral surface and decrease its floatability under flotation conditions. Experimental results of adsorption studies using UV-spectroscopy and scanning electron microscopy, added by lazer and atomic force microscopy reveales that components of herbal extracts may fix on the surface of sulfide minerals providing the selective hydrophilic coating on their surface. The formation of the new phase of reactant on pyrite surface was identified, which changed greatly initial morphology of sulfide phase. Newly formed phase is characterized by discrete non-uniform distribution. Moreover, the extract forms rather stable coverage on the mineral surface which can’t be clean off by distilled water. The results of flotation tests justify that cheap plant extracts may be used as flotation modifying agents to separate hard-to-beneficiate pairs of sulfide minerals, replacing highly toxic chemical compounds by environmentally safe substances of plant origin.