The work considers the suitability of using multispectral satellite remote sensing data Landsat-8 for conducting regional geological and mineralogical mapping of the territory of south-eastern Transbaikalia (Russia) based on statistical methods for processing remote sensing data in conditions of medium–low-mountain relief and continental climate. The territory was chosen as the object of study due to its diverse metallogenic specialization (Au, U, Mo, Pb-Zn, Sn, W, Ta, Nb, Li, fluorite). Diversity in composition and age of ore-bearing massifs of intrusive, volcanogenic, and sedimentary rocks are also of interest. The work describes the initial data and considers the procedure for their pre-processing, including radiometric and atmospheric correction. Statistical processing algorithms to increase spectral information content of satellite data Landsat-8 were used. They include: principal component analysis, minimum noise fraction, and independent component analysis. Eigenvector matrices analyzed on the basis of statistical processing results and two-dimensional correlation graphs were built to compare thematic layers with geological material classes: oxide/hydroxide group minerals containing transition iron ions (Fe3+ and Fe3+/Fe2+); a group of clay minerals containing A1-OH and Fe, Mg-OH; and minerals containing Fe2+ and vegetation cover. Pseudo-colored RGB composites representing the distribution and multiplication of geological material classes are generated and interpreted according to the results of statistical methods. Integration of informative thematic layers using a fuzzy logic model was carried out to construct a prediction scheme for detecting hydrothermal mineralization. The received schema was compared with geological information, and positive conclusions about territory suitability for further remote mapping research of hydrothermally altered zones and hypergenesis products in order to localize areas promising for identifying hydrothermal metasomatic mineralization were made.
The paper proposes a special technique for microstructural analysis (STMA) of rock samples based on two provisions. The first one is an algorithm for the automatic detection and digitalization of microstructures in images of oriented thin sections. The second one utilizes geographic information system (GIS) tools for an automatized analysis of objects at the micro scale. Using STMA allows the establishment of geometric features of fissure and pore space of rock samples to determine the parameters of stress–strain fields at different stages of rock massif deformation and to establish a relationship between microstructures and macrostructures. STMA makes it possible to evaluate the spatial heterogeneity of physical and structural properties of rocks at the micro scale. Verification of STMA was carried out using 15 rock samples collected across the core of the Primorsky Fault of the Baikal Rift Zone. Petrographic data were compared to the quantitative parameters of microfracture networks. The damage zone of the Primorsky Fault includes three clusters characterized by different porosity, permeability, and deformation type. Findings point to the efficiency of STMA in revealing the spatial heterogeneity of a tectonic fault.
The results of the experimental study of physicochemical properties of chalcopyrite, galena, arsenopyrite, pyrite and cassiterite, as components of lode tin ores, following their surface modification by stable metal-dibutyldithiocarbamate complexes (DBDTC), are presented. DBDTC was selected as a strong sulphydric collector, possessing complexing properties with respect to copper, lead, silver and other non-ferrous and noble metals, for application in bulk flotation of sulfide minerals, as components of complex tin ores, with a view to prevent transfer of sulfides into tin concentrate. By means of the methods of analytical scanning electron microscopy ASEM (LEO 1420VP INCA Oxford Energy 350) and laser microscopy (Keyence VK-9700), through measurements of electrode potentials of mineral polished sections by potentiometric titration method and with the help of monomineral flotation, individual character of DBDTC adsorption layer formation on chalcopyrite, galena and arsenopyrite surface has been established, reagent’s films dimensions and their attachment strength have been determined. It is noted, that cassiterite indifference to DBDTC provides for its selective separation into sands product in sulfides flotation. It is shown, that sulfides surface modification by stable metal-dibutyldithiocarbamate complexes increases their recovery into bulk sulfide concentrate in lode tin ores flotation.The studies were performed with the aid of the Russian Science Foundation Grant (Project No. 17-17-01292).
The interrelation between geometric parameters (density and length) of the fault systems of four scale levels (kilometers, meters, centimeters, and millimeters) was established for the first time by...
Extremely little attention is paid to the issues of detecting and interpreting of central type structures (CTSs) when conducting remote structural-geological and structural-geomorphological studies. At the same time, in the 1970–1980s, it was proven that CTSs play an important role in the localization of deposits and ore fields. The position of these structures must necessarily be taken into account when solving problems of searching for and predicting mineral resources in the context of metallogenic analysis and reconstruction of the geological history of development of the studied areas. The almost complete absence of results of mass detection and interpreting of CTSs can be explained by the still poorly developed methodology for identifying and analyzing this type of structure. In the present study for the territory of Southeastern Transbaikalia, based on modern geoinformation technologies, the use of remote sensing data (radar topographic survey) of high resolution, the creation of a digital elevation model, and the application of an integrated structural-spatial analysis, an author’s approach to detection and interpretation of the CTSs is presented, including in connection with the localization of ore objects of various geological-industrial (geological-genetic) types within the framework of the concept of the formation of mineral systems. A statistical analysis of the CTSs identified in the area was carried out, which made it possible to establish a smooth increase in the number of structures with a decrease in their diameter. It is shown that the spatial maxima of ore mineralization extent within the territory are concentrated on the periphery of large CTSs and in their immediate vicinity. Most of the known large ore objects are confined to the internal areas of structures less than 10 km in diameter. Based on the approach of constructing model sections, it was possible to reconstruct the deep position of magma chambers associated with the identified CTSs, and, thereby, to determine the probable sources of metal-bearing fluids. A close spatial relationship between the identified magma chambers and deep faults has been established. To determine the most favorable sites for the deposition of ore mineralization, based on structural-spatial criteria, which include not only structural elements of the CTSs, but also segments of known fault structures, weight of evidence models of the territory have been created. The accuracy of the complex model is 89%. Thus, in accordance with the concept of mineral systems, the sources, migration pathways, and sites of the most probable deposition of ore mineralization have been reconstructed.