25 October 2022 in IEEE Transactions on Aerospace and Electronic Systems
In this paper, a robust continuous controller is investigated to solve the global finite-time attitude stabilization problem of rigid spacecraft system subject to multiple disturbances. The system order is firstly increased by derivation and the derivative of the actual torque is regarded as the virtual control law to be designed. Then, a super-twisting differentiator is constructed to provide finite-time angular acceleration estimations. Finally, based on the estimated angular accelerations, a discontinuous set stabilization control law is designed as the virtual controller. The actual continuous controller is obtained by integrating the discontinuous one. Rigorous proof and stability analysis are presented based on Lyapunov analysis. Compared with most of the existing finite-time control approaches in spacecraft systems, the proposed continuous control scheme guarantees the finite-time set stability of the closed-loop system. Moreover, the system states can converge to the equilibria even in the presence of derivative-bounded disturbances. Simulation studies of the proposed controller are illustrated to demonstrate the strong disturbance rejection ability, fast convergence rate, and high steady-state precision.
1 April 2024 in IEEE Transactions on Aerospace and Electronic Systems
Rigid spacecraft plays significant roles in future space exploration. In this paper, a continuous bounded switching solution is studied for the finite-time attitude stabilization control of spacecraft system considering actuator saturation problem. Firstly, with the adoption the super-twisting disturbance observer, the lumped disturbance within the spacecraft dynamics can be accurately estimated. Then, combining with disturbance estimations, a composite switching control approach is proposed, which is transitioned from discontinuous relay polynomial form to continuous non-smooth form. With the proposed controller, spacecraft attitude is finite-time set stable even with multi-source disturbances. Moreover, the actuator saturation problem will not be violated and a bounded control input amplitude is obtained. Finally, various simulation cases are characterized by stronger disturbance rejection ability and higher attitude tracking accuracy as compared with existing solutions.
27 March 2024 in IEEE Transactions on Intelligent Vehicles
The challenge of allowing a quadrotor to land quickly on an unknown moving platform using visual cues is addressed. A position-based visual servoing (PBVS) framework is designed that utilises the relative position data captured by the onboard camera to ensure a successful landing. The inherent limitation imposed by the camera's low sampling rate, which hampers the update and transfer rate of control commands, is mitigated by introducing an alternating predictive observer (APO). This observer inputs rapid actual or virtual position information into the control system. Actual relative positions are used for observer design when available from the camera, whereas virtual relative positions, predicted by the quadrotor model, are used when direct sampling is unattainable. This approach enables a process that alternates between prediction and observation, allowing for the design of a sampled-data controller that updates at a fast rate, commensurate with the APO. The robustness of the proposed PBVS-APO controller is exhibited, requiring no prior knowledge of the platform's dynamics. Validation through numerical simulations and experiments confirms the high control bandwidth and the rapid landing efficacy of the control strategy.
26 July 2024 in IEEE Transactions on Control Systems Technology
This article presents a position-based visual servo approach to allow a quadrotor to visually land on a moving platform, addressing perception delay and disturbances using only sampled-data output feedback. Without the platform’s model prior, the relative position of the quadrotor and the platform is determined by capturing the AprilTag on the platform by an onboard camera. The limitation in the camera’s sampling frequency yields only discrete output with time delay, emphasizing the requirement for a sampled-data method, since continuous system theory is not applicable in this scenario. In addition, disturbances arising from the unknown platform motion, wind resistance, and attitude tracking errors are also unavoidable. To mitigate these issues, a sampled-data time-delay extended state observer (TDESO)-based predictor is developed, capable of actively predicting the current states and disturbances. Using these predictions, a composite sampled-data controller is devised that incorporates disturbance feedforward compensation, thus enhancing the system’s robustness against disturbances. Rigorous Lyapunov analysis is provided, offering a guarantee that the states of the sampled-data control system converge asymptotically to a bounded region, even in the presence of perception delay and disturbances. The effectiveness and practicality of the proposed algorithm are supported by simulations and experimental results.
11 November 2024 in IEEE Transactions on Transportation Electrification
The single-loop control structure of permanent magnet synchronous motor (PMSM) is widely considered in practical applications. However, certain issues such as overcurrent risks and multisource disturbances may result in unsatisfactory speed regulation performance and increase the risk of damage to the system circuitry. In this article, a current-constrained continuous nonsingular terminal sliding mode control (CNTSMC) approach is proposed to address these problems. First, two finite-time disturbance observers (FTDOs) are designed to estimate both matched and mismatched disturbances in the PMSM systems. Then, a composite CNTSMC method incorporating the disturbance estimation is designed to improve the anti-disturbance ability of PMSM systems. To realize overcurrent protection, a novel switching idea is introduced based on the composite CNTSMC method, which is implemented only when the current reaches the constraint boundary. Finally, the stability analysis of the closed-loop control system is presented, and the proposed method is demonstrated to be effective through experimental tests.
18 September 2024 in IEEE Transactions on Circuits and Systems I: Regular Papers
Considering the speed regulation problem of converter-driven motor systems (CDMS), a composite finite-time anti-disturbance control scheme is proposed in this paper. Firstly, the controller design process is mainly divided into two blocks according to block backstepping control techniques. Then, by constructing universal finite-time observers (UFTO), immeasurable system dynamics and multiple disturbances are estimated, simultaneously. Based on the estimated information, the integral terminal sliding mode control (ITSMC) strategies devised for the CDMS exhibit robust disturbance rejection capabilities. Compared with existing methods, the proposed composite control scheme is distinguished by its reliance solely on measured output, enhanced dynamic response speed, superior disturbance rejection capability, and a more streamlined controller design. Furthermore, a rigorous global finite-time stability analysis is presented for the closed-loop system. Finally, numerous experimental results are given to validate the effectiveness of the proposed control scheme.