14 November 2022 in Communications Materials
Magnetic random-access memory (MRAM) based on voltage-controlled magnetic anisotropy in magnetic tunnel junctions (MTJs) is a promising candidate for high-performance computing applications, due to its lower power consumption, higher bit density, and the ability to reduce the access transistor size when compared to conventional current-controlled spin-transfer torque MRAM. The key to realizing these advantages is to have a low MTJ switching voltage. Here, we report a perpendicular MTJ structure with a high voltage-controlled magnetic anisotropy coefficient ~130 fJ/Vm and high tunnel magnetoresistance exceeding 150%. Owing to the high voltage-controlled magnetic anisotropy coefficient, we demonstrate sub-nanosecond precessional switching of nanoscale MTJs with diameters of 50 and 70 nm, using a voltage lower than 1 V. We also show scaling of this switching mechanism down to 30 nm MTJs, with voltages close to 2 V. The results pave the path for the future development and application of voltage-controlled MRAMs and spintronic devices in emerging computing systems.
13 August 2025 in Nature Electronics
NMNoraica Davila Melendez
+3
26 January 2023 in Journal of Applied Physics
The emergence of embedded magnetic random-access memory (MRAM) and its integration in mainstream semiconductor manufacturing technology have created an unprecedented opportunity for engineering computing systems with improved performance, energy efficiency, lower cost, and unconventional computing capabilities. While the initial interest in the existing generation of MRAM—which is based on the spin-transfer torque (STT) effect in ferromagnetic tunnel junctions—was driven by its nonvolatile data retention and lower cost of integration compared to embedded Flash (eFlash), the focus of MRAM research and development efforts is increasingly shifting toward alternative write mechanisms (beyond STT) and new materials (beyond ferromagnets) in recent years. This has been driven by the need for better speed vs density and speed vs endurance trade-offs to make MRAM applicable to a wider range of memory markets, as well as to utilize the potential of MRAM in various unconventional computing architectures that utilize the physics of nanoscale magnets. In this Perspective, we offer an overview of spin–orbit torque (SOT) as one of these beyond-STT write mechanisms for the MRAM devices. We discuss, specifically, the progress in developing SOT-MRAM devices with perpendicular magnetization. Starting from basic symmetry considerations, we discuss the requirement for an in-plane bias magnetic field which has hindered progress in developing practical SOT-MRAM devices. We then discuss several approaches based on structural, magnetic, and chiral symmetry-breaking that have been explored to overcome this limitation and realize bias-field-free SOT-MRAM devices with perpendicular magnetization. We also review the corresponding material- and device-level challenges in each case. We then present a perspective of the potential of these devices for computing and security applications beyond their use in the conventional memory hierarchy.
5 April 2021 in IEEE Magnetics Letters
Hardware implementation of artificial neural networks (ANNs) using conventional binary arithmetic units requires large area and energy, due to the massive multiplication and addition operations in the inference process, limiting their use in edge computing and emerging Internet of Things (IoT) systems. Stochastic computing (SC), where the probability of 1s and 0s in a randomly generated bit-stream is used to represent a decimal number, has been devised as an alternative for compact and low-energy arithmetic hardware, due to its ability to implement basic arithmetic operations using far fewer logic gates than binary operations. To realize SC in hardware, however, tunable true random-number generators (TRNGs) are needed, which cannot be efficiently realized using existing complementary metal-oxide-semiconductor complementary metal-oxide-semiconductor (CMOS) technology. In this letter, we address this challenge by using magnetic tunnel junctions (MTJs) as TRNGs, the stochasticity of which can be tuned by an electric current via spin-transfer torque. We demonstrate the implementation of ANNs with SC units, using stochastic bit-streams experimentally generated by a series of 50 nm perpendicular MTJs. The numerical value (1 to 0 ratio) of the bit-streams is tuned by the current through the MTJs via spin-transfer torque with an ultralow current of <;μA (= 0.25 MA·cm -2 ). The MTJ-based SC-ANN achieves 95% accuracy for handwritten digit recognition on the MNIST database. MRAM-based SC-ANNs provide a promising solution for ultra-low-power machine learning in edge, mobile, and IoT devices.
1 October 2025 in Physical Review X
Probabilistic computing with p-bits is emerging as a computational paradigm for machine learning and for facing combinatorial optimization problems (COPs) with the so-called probabilistic Ising machines (PIMs). From a hardware point of view, the key elements that characterize a PIM are the random number generation, the nonlinearity, the network of coupled probabilistic bits, and the energy-minimization algorithm. Regarding the energy-minimization algorithm in this work we show that PIMs using the simulated quantum annealing (SQA) schedule exhibit better performance as compared to simulated annealing and parallel tempering in solving a number of COPs, such as maximum satisfiability problems, the planted Ising problem, and the traveling salesman problem. Additionally, we design and simulate the architecture of a fully connected CMOS-based PIM that is able to run the SQA algorithm having a spin-update time of 8 ns with a power consumption of 0.22 mW. Our results also show that SQA increases the reliability and the scalability of PIMs by compensating for device variability at an algorithmic level enabling the development of their implementation combining CMOS with different technologies such as spintronics. This work shows that the characteristics of the SQA are hardware agnostic and can be applied in the codesign of any hybrid analog-digital Ising machine implementation. Our results open a promising direction for the implementation of a new generation of reliable and scalable PIMs.
29 April 2022 in Physical Review Applied
This work proposes and numerically studies a skyrmionic-magnon-switch (SMS) device, where a Néel-type skyrmion acts as a programmable scattering center to route propagating spin waves. Our results show that the effective deflection of magnons by a skyrmion strongly depends on the ratio of magnon wavelength to skyrmion diameter, which is as large as 30° when the skyrmion diameter is comparable to the magnon wavelength. This offers the possibility to program the routing of magnons in a network of ferromagnetic wires, by controlling the perpendicular magnetic anisotropy of the ferromagnetic film via the voltage-controlled magnetic anisotropy effect, which, in turn, controls the skyrmion size, stability, and spin-wave deflection angle. The proposed SMS device allows for electrical routing of spin waves between branches of a magnonic circuit, a functionality that is fundamental to emerging magnonic logic and computing concepts. It is shown that on:off ratios as large as 90× are achievable in such an SMS device using realistic material parameters.