1 May 2022 in Physics of Fluids
Hydraulic torque converters are prone to cavitation due to their high impeller rotational speeds and their complex three-dimensional flow characteristics. Since the blades are the core components of torque converters, the shapes of the blades are important to the hydraulic performance and cavitation characteristics. Different cavitation computational fluid dynamics (CFD) models for a torque converter were developed to simulate the internal cavitation flow for different pump and turbine blade exit angles, and the influence of the blade angles on the cavitation characteristics and cavitation flow field in the torque converter was investigated. Experimental prototypes were produced and tested for verification. The results indicate that the pump and turbine blade exit angles had significant effects on the cavitation number of the torque converter. Increasing the pump and turbine blade exit angles promotes the generation and intensification of cavitation, resulting in severe changes in the shapes and locations of the cavitation bubbles due to changes in the fluid impact angles. Additionally, cavitation is quickly suppressed and the performance is improved when the blade exit angles are reduced within an appropriate range, in particular, that of the turbine blade. These research results can provide guidance for the design of a high-performance hydraulic torque converter cascade system and the suppression of cavitation for practical engineering applications.
1 April 2022 in Physics of Fluids
Cavitation is a transient phase transition between liquid and vapor, and it often occurs in fluid machinery, especially in a hydraulic torque converter that uses oil as the working medium to transmit speed and torque. The complex and strongly coupled fluid flow in the torque converter is prone to cavitation due to high rotating speed and high-temperature working conditions. Cavitation seriously affects the working performance, transmission smoothness, and service life of the torque converter. The flow pressure in the stator of a torque converter under various charging conditions and high rotating speeds was measured. The pressure data on the stator blade were analyzed in the time domain and frequency domain to identify and evaluate the cavitation characteristic. The transient cavitation flow inside the torque converter was also simulated with the computational fluid dynamics model. The results show that the shedding of cavitation seriously reduced the hydraulic performance, hindered the fluid flow, and destroyed the stability of the flow field. Moreover, cavitation aggravates the complexity and nonlinearity of the pressure frequency and hydraulic performance oscillation of the torque converter, and seriously affected the shaft/blade interaction frequency between the pump and stator. Meanwhile, the occurrence and degree of cavitation in the torque converter can be evaluated by APS.shaft/APS.blade (the amplitude ratio of the shaft interaction frequency and blade interaction frequency between pump and stator) with spectrum analysis of the dynamic pressure, and the critical value was 1.6 for the test torque converter. The research revealed the influence of cavitation on the internal flow field of the torque converter and provided a novel practical cavitation evaluation technique.
30 May 2022 in Numerical Heat Transfer, Part A: Applications
The performance of torque converters, which use hydraulic oil as the working medium to transmit power, are severely affected by the operating temperature because various oil properties, such as viscosity, density and saturated pressure, vary drastically with temperature change. To study the thermal effect on the cavitation characteristics of viscous oil, we developed a full flow passage geometry and computational fluid dynamics (CFD) model with cavitation based on the finite volume method (FVM) to predict and analyze cavitation behavior and thermal effect in a torque converter. The results show that the critical cavitation number and critical cavitation temperature of the tested torque converter are 9.2 and 30 °C, respectively, and increasing the temperature reduces the cavitation number and induces the generation and intensification of cavitation. Besides, although higher temperature improves the transmission efficiency and capacity constant of the torque converter, it greatly magnifies the influence of cavitation on the hydrodynamic performance. In severe cases, it reduces the hydraulic performance by 9.3% and the flow velocity by 11.8% at 100 °C. Meanwhile, the cavitation flow field and the configuration of cavitation are also greatly affected by temperature. About 11.9% of the surface of the stator blade was covered by cavitation bubbles with the vapor volume fraction of 88.1% at 100 °C. Moreover, 30–60 °C is the optimum operating temperature range in terms of cavitations effect with no pronounced cavitation occurrence or that the cavitation degree is too weak to affect the performance in the mentioned temperature range.
1 April 2024 in Physics of Fluids
As the core fundamental components in the field of fluid transmission and control, viscous oil fluid components determine the technological level of fluid machinery and high-end equipment. However, bubbles as effective cavitation nuclei widely exist in the interior of viscous oil fluid components, directly affecting their performance and technological development. In order to reveal the bubble motion characteristics in viscous oil and establish a high-precision prediction method, this paper focuses on No. 110 technical white oil and develops a visualized observation system for studying the motion characteristics and morphological features of bubbles in viscous oil. The bubble motion trajectory, rising rate, and force state are analyzed, and a prediction model for the drag coefficient is proposed and corrected. The research results indicate that during the rising process, the bubble morphologies in viscous oil show an elliptical shape. The oil temperature has a significant influence on the bubble motion characteristics, with the occurrence of oscillations during the rise process after reaching 80 °C. Additionally, a new prediction model for the drag coefficient of bubble is fitted, where the relative error of bubble motion rate can be controlled within 5.5% for 0.3 < Re < 50. This research provides significant theoretical significance and engineering application value.
30 October 2024 in Ocean Engineering
1 May 2025 in Physics of Fluids
With the rapid development of aerospace, armored equipment, and construction machinery, viscous oil fluid components are developing toward miniaturization and integration as basic components, resulting in more complex oil flow conditions inside the components, making cavitation phenomena more likely. In this paper, a numerical calculation model of cavitation in viscous oil around the hydrofoil was constructed, the initial cavitation pressure threshold and characteristic distribution of the cavitation flow field under various pressure conditions were determined, and observations of cavitation phenomena under various pressure were accomplished. The results show that the high-speed rotating hydrofoil in viscous oil produces attached cavitation at the head of the suction surface, and the cavitation phenomenon gradually increases with the decrease in the pressure. The data show that the initial pressure is 0.16 MPa for the hydrofoil with a rotational speed of 4000 rpm, the total cavitation volume reaches 1.8065 × 10−3 m3 when the pressure is reduced to 0.01 MPa, and the bulk interphase mass transfer rate reaches 10.0514 kg/m3/s. The results of the research reveal the initial conditions of the cavitation in viscous oil around the hydrofoil and its pressure effect, which provides data support for the component cavitation inhibition.