Ultrasonic electromagnetic-acoustic transducers (EMAT) with permanent magnets are used to test ferromagnetic metal products. This leads to strong pressing of the EMAT to the metal, wear, and the appearance of coherent interference, which makes it impossible to carry out measurements and diagnostics. These disadvantages can be eliminated by introducing pulse magnets. The aim of the work is to determine rational geometric parameters of a pulse magnet for EMAT. To achieve this goal, a physical and mathematical problem was formulated and modeling was performed using the Comsol Multiphysics package. It was found that to ensure efficient operation of the EMAT, it is advisable to set the height of the pulse magnet within 50...60 mm, and the pole dimensions are 30x30...50x50 mm. Such parameters provide a quasi-stationary magnetic field induction value of at least 0.35 T in the range of ± 10 mm from the center of the pulse magnet pole.
2 July 2025 in Electrical Engineering & Electromechanics
Purpose. Determination of rational parameters of an autonomous source of constant magnetic field, ensuring the efficiency of using portable electromagnetic-acoustic transducers (EMAT) for diagnostics of remote ferromagnetic objects. Methodology. An analysis of the parameters of an autonomous magnetic field source consisting of a permanent magnet and a ferromagnetic screen magnetizing a ferromagnetic object with a flat surface, providing a central magnetic field along the magnet axis above 0.3 T, was carried out. Results. The results of experimental studies on a sample of an autonomous source, which contained 6 sections of a permanent magnet made of NeFeB ceramics with dimensions of 50´50´10 mm3, correspond to the results of calculating the magnetic field on the surface of a ferromagnetic sample with an error of up to 9 %. Experimental studies were carried out for EMAT with two magnetic field sources containing rectangular permanent magnets of the same height but different widths. Novelty. It has been established that in order to select rational parameters of an autonomous source of magnetic field, it is necessary to use an integral criterion that takes into account the magnetic field in the surface layer of a ferromagnetic object, the magnetic scattering field, the volume of a permanent magnet, which determines the mass and size indicators and cost of the source, and the force of attraction to the ferromagnetic object. Practical value. For portable EMAT, increasing the magnetic field in a remote ferromagnetic object either by increasing the volume of a permanent magnet or by decreasing the air gap between the magnetic field source and the ferromagnetic object provides increased EMAT efficiency by increasing the ratio of the amplitude of the received ultrasonic bottom pulses to the noise amplitude. References 27, figures 14.
The analysis of information sources on the development and usage of electromagnetic-acoustic methods and means of ultrasonic inspection, measurements and diagnostics was performed. It is shown that electromagnetic-acoustic (EMA) transducers (EMAT) with permanent magnets have significant advantages compared to piezoelectric transducers, but also have disadvantages, especially in the inspection of ferromagnetic metal products, both in normal and hot conditions, especially when using them in portable ultrasonic devices. Many experts suggest eliminating the disadvantages of EMAT with permanent magnets by using pulsed magnetization. This direction of research is promising, especially when testing hot metal, because it allows for creation of pulsed magnetic fields with a peak value of 2...3 and even 10 T, making it possible to significantly increase the sensitivity of testing, since the coefficient of conversion of electromagnetic energy into ultrasonic and vice versa depends on the induction of magnetic fields squarely. But until now, data on the widespread use of pulsed magnetization in portable EMATs has not been established. This situation is caused by a small gap between the EMAT and the metal, insufficient development of the EMAT functioning technologies, the complexity of the hardware implementation, difficulties in dealing with interferences that occur during the excitation of pulsed magnetic field, etc. Therefore, for the implementation of such a promising direction of development of sensitive EMA transducers, theoretical and practical developments are to be carried out, which is to make it possible to introduce high-tech means of inspection, measurements and diagnostics into production. References 31, figures 9.
Model studies were carried out using the COMSOL Multiphysics package, aimed at ensuring the forming of a permanent magnet magnetic field at a considerable distance to a ferromagnetic product from its pole, which is necessary to create efficient portable ultrasonic electromagnetic-acoustic transducers of thickness gauges and testing and diagnostic devices. It is theoretically shown and experimentally confirmed that for portable measuring ultrasonic devices it is expedient to set the height of the permanent magnet at about 60 mm and the cross section of the magnet pole 50x50 mm2. At the same time, with a gap between the magnet pole and the product of about 30 mm, the value of the normal component of the magnetic field induction near the surface of the object is about 0.3 ... 0.4 T, which is sufficient for thickness gauging or diagnostics of ferromagnetic products using the ultrasonic pitch-and-catch method. References 19, figures 8. За допомогою пакету COMSOL Multiphysics виконано модельні дослідження спрямовані на забезпечення формування магнітного поля постійного магніту на значній відстані від його полюса до феромагнітного виробу, що необхідно задля створення ефективних портативних ультразвукових електромагнітно-акустичних перетворювачів товщиномірів і приладів контролю та діагностики. Теоретично показано та експериментально підтверджено, що для портативних вимірювальних ультразвукових приладів висоту постійного магніту доцільно встановлювати близько 60 мм та переріз полюса магніту 50х50 мм2. При цьому у разі зазору між полюсом магніту і виробом близько 30 мм величина нормальної компоненти індукції магнітного поля біля поверхні об'єкта становить близько 0,3...0,4 Тл, що є достатнім для проведення товщинометрії чи діагностики феромагнітних виробів ультразвуковим дзеркально-тіньовим методом. Бібл. 19, рис. 8.