Ольга Юріївна Кропачек

Ольга Юріївна Кропачек

Auto-generated profile, based on publicly available information

Ольга Юріївна Кропачек

National Technical University "Kharkiv Polytechnic Institute

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
23 February 2023 in Tekhnichna Elektrodynamika
Verified
Journal Article
Open access
PDF file
GSG.M. Suchkov
G.M. Suchkov
VBV.F. Bolyukh
V.F. Bolyukh
OKOleksandr Kocherga
Oleksandr Kocherga
RMR.P. Mygushchenko
R.P. Mygushchenko
OKO.Yu. Kropachek
O.Yu. Kropachek
Model studies were carried out using the COMSOL Multiphysics package, aimed at ensuring the forming of a permanent magnet magnetic field at a considerable distance to a ferromagnetic product from its pole, which is necessary to create efficient portable ultrasonic electromagnetic-acoustic transducers of thickness gauges and testing and diagnostic devices. It is theoretically shown and experimentally confirmed that for portable measuring ultrasonic devices it is expedient to set the height of the permanent magnet at about 60 mm and the cross section of the magnet pole 50x50 mm2. At the same time, with a gap between the magnet pole and the product of about 30 mm, the value of the normal component of the magnetic field induction near the surface of the object is about 0.3 ... 0.4 T, which is sufficient for thickness gauging or diagnostics of ferromagnetic products using the ultrasonic pitch-and-catch method. References 19, figures 8. За допомогою пакету COMSOL Multiphysics виконано модельні дослідження спрямовані на забезпечення формування магнітного поля постійного магніту на значній відстані від його полюса до феромагнітного виробу, що необхідно задля створення ефективних портативних ультразвукових електромагнітно-акустичних перетворювачів товщиномірів і приладів контролю та діагностики. Теоретично показано та експериментально підтверджено, що для портативних вимірювальних ультразвукових приладів висоту постійного магніту доцільно встановлювати близько 60 мм та переріз полюса магніту 50х50 мм2. При цьому у разі зазору між полюсом магніту і виробом близько 30 мм величина нормальної компоненти індукції магнітного поля біля поверхні об'єкта становить близько 0,3...0,4 Тл, що є достатнім для проведення товщинометрії чи діагностики феромагнітних виробів ультразвуковим дзеркально-тіньовим методом. Бібл. 19, рис. 8.

4 June 2023 in Bulletin of the National Technical University "KhPI". Series: Hydraulic machines and hydraulic units
Verified
Journal Article
Open access
PDF file
РМРуслан Павлович Мигущенко
Руслан Павлович Мигущенко
ОКОльга Юріївна Кропачек
Ольга Юріївна Кропачек
ЛШЛілія Степанівна Шустік
Лілія Степанівна Шустік
КМКатерина Русланівна Мигущенко
Катерина Русланівна Мигущенко
Присвячена розробці та аналізу математичних моделей теплових об'єктів. В якості теплового об'єкту прийнятий екструдер з розділенням фракцій продукту – яскравий приклад багатозонних прохідних технологічних агрегатів, цінність якого для вітчизняного господарства величезна. В статті здійснене заміщення реального промислового об'єкту лабораторним зразком для відпрацювання методики практичної ідентифікації при отриманні математичної моделі з її наступним аналізом. Позитивний результат спроможний перенести отримані результати на реальний технологічний агрегат. В статті здійснений вибір об'єкта дослідження, проаналізовані можливі представлення математичних моделей промислових об'єктів, оглянуті методи практичної ідентифікації, здійснений вибір методу практичної ідентифікації теплових об'єктів, підготовлена серія натурного експерименту в лабораторних умовах та отримані чисельні результати, визначені чисельні параметри коефіцієнтів передачі та транспортного запізнення математичних моделей, знайдені сталі часу математичних моделей, здійснений аналіз математичних моделей лабораторної установки під кутом оптимізації. Отримані результати дозволили грамотно підійти до ідентифікації робочої зони багатозонного прохідного технологічного агрегату на прикладі екструдера, який здійснює технологічний процес переробки сільськогосподарської сировини шляхом розділення фракцій продукту. А саме визначитись з типом первинного перетворювача (датчика температури), місця розташування датчиків на об'єкті, оцінити перехресні впливи зон нагрівання в статиці, підібрати структуру і параметри ПІ (пропорційна, інтегруюча складові) та ПІД (пропорційна, інтегруюча, диференційна складові) регуляторів для підтримки заданої технічним завданням температури в робочій зоні екструдера.

25 October 2019 in Tekhnichna Elektrodynamika
Verified
Journal Article
Closed access
OPO.N. Petrishchev
O.N. Petrishchev
KNK.L. Nozdrachova
K.L. Nozdrachova
GSG.M. Suchkov
G.M. Suchkov
RMR.P. Mygushchenko
R.P. Mygushchenko
OKO.YU. Kropachek
O.YU. Kropachek
SPS.YU. Plesnetsov
S.YU. Plesnetsov
Joomla! - the dynamic portal engine and content management system

4 July 2025 in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
Verified
Journal Article
Open access
PDF file
RMRuslan Mygushchenko
Ruslan Mygushchenko
ОКОльга Юріївна Кропачек
Ольга Юріївна Кропачек
OFOleksii Finohenov
Oleksii Finohenov
TPTetiana Poliakova
Tetiana Poliakova
РМРуслан Павлович Мигущенко
Руслан Павлович Мигущенко
ТПТетяна Леонідівна Полякова
Тетяна Леонідівна Полякова
The article examines a thermal industrial object with distributed temperature parameters. An information-geometric model based on transfer functions has been developed for the industrial object and a mathematical model has been determined. Additionally, a cross-coupling compensator has been synthesized. Sequential logarithmic identification method was used and studied to formulate the mathematical model of the object. Transmission coefficients, transport delay and time constants for each transfer function of the information-geometric model were calculated during this process. A compensator for three temperature channels was synthesized using matrix calculus approaches from linear algebra. Given the computational complexity of calculations, the authors developed and utilized specialized software capable of automatically real-time identification of smooth aperiodic transient responses and automatically synthesizing a cross-coupling compensator in real-time The Einstein digital temperature converter set was used for this purpose. It was assembled into a measurement channel with a digital output and a USB interface. The authors also investigated temperature stabilization channels in the studied industrial object using a PID controller and a relay actuator. A mathematical study of the amplitude and period of self-oscillations across the three control channels was conducted determining the impact of transport delay on the amplitude and period of temperature signal oscillations. Future research is planned for different types of industrial objects characterized by different transfer functions, specifically those involving high-frequency vibration processes. Vibration and its derivatives, namely vibrational displacement, velocity, and acceleration along with temperature, are among the most commonly monitored parameters in industrial applications.

1 January 2024 in Ukrainian Journal of Natural Sciences
Verified
Journal Article
Closed access
РМР. П. Мигущенко
Р. П. Мигущенко
МВМ. М. Волобуєв
М. М. Волобуєв
ІАІ. В. Асєєва
І. В. Асєєва
ОКО. Ю. Кропачек
О. Ю. Кропачек
ВБВ. М. Балєв
В. М. Балєв
Дана стаття присвячена метрологічному вивченню процесу дисоціації оцтової кислоти при зміні температури в діапазоні від 20 °С до 75 °С. У ході дослідження були розглянуті методи, проведена класифікація розглянутих методів, сформульована методика експериментів. Обрана методика відображає експрес визначення водневого показника за допомогою портативного рН-метра. Концентрація робочого розчину кислоти становила 6 моль/л, з якої готували розчин з концентрацією 1 моль/л. Для вимірювань були обрані вузлові температурні точки (чотири точки в діапазоні температур 20 °C – 75 °C; сформовано 5 дослідних проб оцтової кислоти (С(HAc) = 1 моль/л); проведено аналіз результатів вимірювань у вузлових точках на точність результатів вимірювань п’яти дослідних зразків оцтової кислоти за статистичними моментами першого та другого порядку; оцінено характеристики точності експериментальних даних. Температуру зразків оцтової кислоти доводили до вузлових точок з позитивним градієнтом температури за допомогою парової бані. Оцінка похибки вимірювання визначалася класом точності приладу і становила 0.32. За отриманими значеннями рН визначали константу дисоціації. Ці визначення проводили за умови забезпечення хімічної рівноваги. Характер поведінки константи дисоціації при зміні температури досліджуваних зразків явно нелінійний.

27 December 2024 in Bulletin of the National technical university "Kharkiv Polytechnic Institute" Series: Techniques in a machine industry
Verified
Journal Article
Open access
PDF file
RMRuslan Mygushchenko
Ruslan Mygushchenko
ОКОльга Юріївна Кропачек
Ольга Юріївна Кропачек
VBVolodymyr Balev
Volodymyr Balev
KMKateryna Mygushchenko
Kateryna Mygushchenko
OFOleksii Finohenov
Oleksii Finohenov
ОФОлексій Михайлович Фіногенов
Олексій Михайлович Фіногенов
The article examines the properties of a mechanical robot and provides recommendations for changes in its design. The relevance of the use of robots in the world is beyond doubt, such robots are used in places that pose a danger to humans or are inaccessible to humans. In each case, the accuracy of positioning and the accuracy of the robot's actions directly affect the efficiency of the tasks assigned to the robot. Practicing robot movements traditionally takes place at robotics competitions, which are widely held around the world. In recent robotics competitions, one of the exercises in the competition was an exercise where the robot had to hang from a beam using its mechanical levers. The researched robot oscillates in the air while hanging on a crossbar on mechanical levers. In the studies, the task was to overcome these negative phenomena - mechanical oscillations, by studying the problem and conducting physical research. In order to conduct physical research and study the issue, a decision was made to replace the real object – the robot – with an appropriate replacement structure. For such a replacement design, a physical pendulum (classical and reversible) is adopted. In physical pendulums, the main parameter is the moment of inertia I, which is determined from the formula: , where m is the mass of the pendulum, g is the acceleration of free fall, d is the distance from the axis of the suspension to the center of mass of the pendulum, T is the oscillation period of the pendulum. The accepted hypothesis is that an increase in the moment of inertia of a real object will lead to the need to increase the force that forces this object to swing. Experimental installations were formed during laboratory research; measured variables – I, independent variables – g, T, dependent variables – m, d were analyzed; experiments were carried out to assess the impact on the moment of inertia I of the distance from the suspension axis to the center of mass of the pendulum d and the influence on the moment of inertia I of the mass of the pendulum m. The obtained results of physical research allow us to provide recommendations on changing the design of a real object - a robot. The recommendations make it possible to eliminate the negative phenomenon – rocking the robot on the crossbar, which will allow to perform the corresponding task better. These recommendations include the following: 1. Load the structure as much as possible by increasing the mass m. 2. Extend the robot levers as much as possible by increasing the distance d. 3. Lower the center of gravity of the robot as much as possible. After making constructive changes in the structure of the robot, it is planned to build its mathematical model for further research.