2 February 2019 in Journal of the Electrochemical Society
Despite considerable progress of silicon/carbon (Si/C) composites anodes, they still suffer from high irreversible capacity losses, which are mainly due to continuous Solid Electrolyte Interphase (SEI) layer formation, which consumes a large amount of lithium. To compensate for the active lithium losses, prelithiation of Si-based anodes has been attempted. In this manuscript, we report the effect of prelithiation on Si/C anodes combined with LiNi0.5Mn0.3Co0.2O2 cathodes in full cell configurations. To prepare LixSi/C anodes, Si/C electrodes were lithiated electrochemically at 0.1 and 0.5 V vs. Li/Li+ in half cell configuration before assembly of the full cell. Special attention is paid to the effect of the degree of prelithiation on initial electrochemical behavior and Li dendrite formation. In this work, electrochemical investigations were performed by using two-electrode and three-electrode measurements. Furthermore, the morphology of the active materials before and after cycling were characterized by post mortem Scanning Electron Microscopy (SEM).
8 January 2018 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
In this work, the effect of Cr3+ partial substitution on vanadium site in monoclinic lithium vanadium(III) phosphate (LVP) structure resulting in compounds with general formula: Li3V2- xCr x(PO4)3-C ( x = 0, 0.05, 0.1, 0.15) was studied. A two-step sol-gel combustion method was employed in syntheses. The samples were characterized by X-ray powder diffraction, scanning electron microscopy, coupled plasma optical emission spectroscopy, and flash combustion. The electrochemical performance of the active materials was examined through rate capability tests and cyclic voltammetry. The unsubstituted compound LVPC delivers higher capacity compared to the Cr-containing samples due to chromium inactivity in the potential range 3.0–4.4 V vs. Li/Li+. However, the Cr-substituted materials show better overall capacity retention (97–97.6%) in contrast to Li3V2(PO4)3-C (96%) in long cycling.