1 April 2023 in Physics of Fluids
Well-known analytical approaches are commonly adopted for the preliminary design of scramjet engines. In this context, the combustion process in the combustion chamber can be modeled by considering heat addition to the airflow at supersonic speed. The one-dimensional Rayleigh flow theory can be applied to estimate the behavior of thermodynamic properties and velocities when the combustion chamber has a constant cross-sectional area and no mass is added within the duct. However, the temperature and pressure predicted by using constant area combustion chambers are too high, implying the necessity of modifications in the cross-sectional area of the chamber to avoid thermal choking and excessive pressure gradients. In this case, the unidimensional Rayleigh theory does not fit anymore. This work proposes an analytical methodology to estimate the airflow thermodynamic properties and velocities for scramjet combustion chambers with cross sections of variable areas by using an iterative algorithm that employs the Rayleigh flow area ratio theory. The analytical results were compared with the two-dimensional computational fluid dynamics analysis using the Reynolds-averaged Navier–Stokes method for both inviscid and viscous flow and considering turbulence effects. The proposed analytical model to estimate the flow behavior in the scramjet combustion chamber predicted results in agreement with the physics of the problem and with the results obtained via numerical simulation. The analytical model cannot predict oscillations in the flow properties caused by the expansion waves and their reflections. Still, the behavior and intensity of the properties are well captured along the entire length of three combustion chambers with variable area. The proposed algorithm is also applied to determine the angle of the combustion chamber that allows guaranteeing a constant, or a quasi-constant, static pressure along the length of the combustion chamber, approaching better the ideal thermodynamic Brayton cycle. The proposed model is suitable for preliminary scramjet designs and can be used to solve other problems involving variable area ducts.
1 May 2022 in AIP Advances
The aerospace vehicle flying at hypersonic speed, using an airbreathing propulsion system based on supersonic combustion (scramjet) technology, requires a highly integrated system without moving parts, making the propulsion system and vehicle shape indistinguishable. A scramjet uses shock waves, generated by its inlet during the hypersonic flight to provide the temperature and velocity of atmospheric air to burn the hydrogen, at the combustor at supersonic speed. The divergent exhaust nozzle accelerates the combustion products providing the thrust. A two-dimensional hydrogen-powered generic scramjet has been designed to demonstrate supersonic combustion in atmospheric flight at a Mach number of 6.8 and an altitude of 30 km. Temperature and velocity at the combustion chamber are the most important key parameters for a preliminary design. The inlet configuration must provide a temperature higher than the ignition temperature of the fuel to guarantee spontaneous combustion and the velocity must remain supersonics. The nozzle exit velocity should be higher than the vehicle flight velocity to obtain sustained flight and produce enough thrust. For this theoretical analysis, the air is considered a calorically perfect gas without viscous effects. The compressible flow is analyzed based on oblique shock waves and one-dimensional compressible flow with friction and heat addition and Prandtl–Meyer coupled to the area ratio to describe each key component of the scramjet, such as compression, combustor, and nozzle sections, respectively. The inlet mass flow and hydrogen mass flow are also critical for the scramjet design to ensure stoichiometrically combustion at the combustion chamber, generating the high flow velocity at the nozzle to produce thrust.