6 June 2018 in IEEE Transactions on Instrumentation and Measurement
The electrical-mechanical dynamics of a transformer may be described by a model with cascade-connected linear and nonlinear parts. This paper shows that mechanical faults have a significant influence on the linear part of the model. A change in the system order of the linear part of the model can be used as an indicator of variance in a transformer's physical characteristics. A technique based on the Lipschitz criterion is developed to estimate the system order, which is then used for detecting changes in the vibration of the system caused by mechanical faults in the windings. The proposed method is tested on a three-phase power transformer, demonstrating promising detection of faults in transformer windings.
30 September 2020 in IEEE Access
Study of the vibration mechanisms of transformer windings may lead to useful applications of vibration techniques to transformer online diagnosis. In a power transformer, the clamping force provides a boundary mechanical constraint to ensure the integrity of the winding. Thus, the looseness of the clamping force is an important health indicator for a transformer. Although the effect of clamping force on a winding’s stiffness and natural frequencies is known, the effect of time-varying load current on these natural frequencies remains unsolved. In this paper, this effect is investigated by studying the mechanical frequency response function of an on-load single-phase winding under different clamping forces and variation of the harmonic amplitude of in-service transformers with load current. Then, a gated recurrent unit (GRU) neural network is used to explore the relationship between current sequence and vibration sequence for operating transformers. This study shows that the electromagnetic force induced by the load current affects the vibration response of the winding structure, especially when the looseness of the clamping force is significant. A potential application of the observed phenomenon for online detection of winding conditions is also illustrated.
1 November 2015 in The Journal of the Acoustical Society of America
This paper extends previous work of Zhang and Pan [J. Acoust. Soc. Am. 133(4), 2082–2096 (2013)] on sound scattering and absorption by an underwater coated plate with a single attached distributed-inhomogeneity to that with periodically located distributed-inhomogeneities. A comparison is made among cases of a plate without inhomogeneities, a plate with inhomogeneities, and one with inhomogeneities ignoring the mutual coupling. Results show that coupling of the structural waves scattered by the inhomogeneities plays an important role in modifying the sound absorption and scattering of surface sound pressure, especially at low frequencies and/or the resonance frequencies of the trapped modes of the plate. The sound absorption of the plate is dependent on the distance between the adjacent inhomogeneities, the length of the inhomogeneity, and the angle of the incident sound. On the surface of the inhomogeneities, the scattered/total sound pressure is generally enhanced. On the surface in between the inhomogeneities, the pressure is also enhanced at low frequencies but is nearly unchanged at higher frequencies. Results also show that the coupling-induced variation of scattered/total pressure is significant only at the resonance frequencies of the global modes and trapped modes. The surface normal velocity is presented to explain the coupling-induced variations in the vibration and pressure fields.
25 September 2001 in Applied Acoustics
21 April 2009 in Journal of Vibration and Acoustics
This paper is concerned with the understanding of vibration characteristics of a box-type structure using the finite element method as a tool. We found that mode shapes of the box structure can be classified according to their symmetrical properties, which are defined by the relative motion between the six plate panels constituting the box. The infinite number of modes of the box-type structure is divided into six groups. Each group has common features of symmetry and similar coupling mechanisms between component panels and distribution of out-of-plane and in-plane components of vibration. Local and net-volume displacements associated with each mode can be correlated with the characteristics of the box as sound sources. Large volume displacement modes resembling the simple sound sources (e.g., monopole and dipole) are identified among the low frequency modes. The distributions of in-plane and out-of-plane (including translational and rotational vibrations at the box edges) vibration components in the modes of the box are also investigated to illustrate the energy transmission mechanism between the box panels.
24 November 2016 in Measurement Science and Technology
This paper focuses on the identification of the nonlinear vibration system of power transformers. A Hammerstein model is used to identify the system with electrical inputs and the vibration of the transformer tank as the output. The nonlinear property of the system is modelled using a Fourier neural network consisting of a nonlinear element and a linear dynamic block. The order and weights of the network are determined based on the Lipschitz criterion and the back-propagation algorithm. This system identification method is tested on several power transformers. Promising results for predicting the transformer vibration and extracting system parameters are presented and discussed.