Ahmad Darwish

Ahmad Darwish

Auto-generated profile, based on publicly available information

Ahmad Darwish

School of Electrical and Computer Engineering and Birck Nanotechnology Center, Purdue University, West Lafayette, IN, USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
5 June 2019 in IEEE Access
Verified
Journal Article
Open access
ADAhmad Darwish
Ahmad Darwish
Shady S. RefaatShady S. Refaat
Shady S. Refaat
HTHamid A. Toliyat
Hamid A. Toliyat
HAHaitham Abu-Rub
Haitham Abu-Rub
The rapid growth of gas insulated switchgears as a compact, efficient, and reliable device has recently been given great attention. Albeit gas insulated switchgears can seldom suffer from failure due to the high resiliency and robustness, some severe damages have been experienced by such devices particularly in the event of partial discharge. Thus, monitoring such accidents has become a vital part of power systems reliability. The ultra-high frequency techniques have recently shown superior performance in the detection and classification of electromagnetic waves produced by partial discharge. This is mainly due to the great immunity to the noise of the ultra-high frequency detection techniques compared with the very-high-frequency counterparts. This review paper highlights the mathematical aspects of the electromagnetic waves generated by partial discharge. It also delivers an overview of the electromagnetic wave behavior in the complex structure of gas insulated switchgears, and outlines the important characteristics of the internal and external partial discharge detection using ultra-high frequency methods.

30 September 2020 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
QKQasim Khan
Qasim Khan
Shady S. RefaatShady S. Refaat
Shady S. Refaat
Haitham Abu-RubHaitham Abu-Rub
Haitham Abu-Rub
HTHamid A. Toliyat
Hamid A. Toliyat
MOMarek Olesz
Marek Olesz
ADAhmad Darwish
Ahmad Darwish
The continuous monitoring of power system devices is an important step towards keeping such capital assets safe. Partial discharge (PD) based measurement tools provide a reliable and accurate condition assessment of power system insulations. It is very common that voids or cavities exist in every solid dielectric insulation medium. In this paper, different voids are modeled and analysed using an advanced finite-element (FE)-based computational algorithm. The proposed approach can be used to measure PD in cavities and voids regardless of their shape and size. The frequentative scripting approach with finite element modeling (FEM) provides the results which satisfy all PD conditions. PD behavior has been studied and analysed through PD statistical features obtained from the simulated PD signal. A comparative study between simulated and experimental results is also performed to validate the accuracy of the proposed modeling approach. To further improve the accuracy of the model, the influence and optimization of certain free parameters required for modeling has been carried out. The paper shows how PD is greatly influenced with the shape and size of voids in dielectric insulators. The research realized in this paper further provides the PD statistical features and its variation with respect to void shape and size. These features are utilized for the assessment of the insulation quality. The variation in PD parameters with respect to voltage level is also presented and discussed.

20 April 2020 in IEEE Sensors Journal
Verified
Journal Article
Open access
ADAhmad Darwish
Ahmad Darwish
Shady S. RefaatShady S. Refaat
Shady S. Refaat
Haitham Abu-RubHaitham Abu-Rub
Haitham Abu-Rub
HTHamid A. Toliyat
Hamid A. Toliyat
Gas-insulated switchgears (GIS) have become essential parts of electrical power substations due to the associated merits of these capital assets. Although such resilient devices can rarely suffer from failure, partial discharge (PD) is responsible for around 85% of their recorded collapses. Ultra-high frequency (UHF) techniques have been widely used in the detection and localization of PD for a long time because of their immunity to noise and high sensitivity. Understanding electromagnetic (EM) wave behavior in GIS systems is significant for improving the utilization of UHF sensors in PD detection and for the optimal allocation of UHF antennas inside GIS systems. Thus, this paper is devoted to building a detailed 3D finite element (FE) model based on UHF detection techniques to understand the propagation behavior of EM waves inside GIS. A disk-type UHF sensor is used for acquiring EM waves inside the GIS. The sensitivity of the sensor has been obtained using a gigahertz transverse-electromagnetic (GTEM) test cell. The proposed model investigates the impact of multiple disconnecting parts including L-structure, relative angle between PD source and sensors, and disconnecting switches on the propagation of electromagnetic waves based on step 1 of the CIGRE recommendations. To validate the modeled GIS, a simple L-structured model is initially built, and a comparative analysis has been conducted between the built model and the experimental and analytical results from the literature.

15 January 2024 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
SKSayed Mohammad Kameli
Sayed Mohammad Kameli
Shady S. RefaatShady S. Refaat
Shady S. Refaat
Haitham Abu-RubHaitham Abu-Rub
Haitham Abu-Rub
ADAhmad Darwish
Ahmad Darwish
AGAli Ghrayeb
Ali Ghrayeb
MOMarek Olesz
Marek Olesz
Power transformers and gas-insulated switchgear (GIS) play crucial roles in electrical power grids. However, they may suffer from degradation of insulation material due to wear and tear, leading to their imminent failure. Partial discharges (PDs) are an initial sign of insulation materials degradation which emit signals spanning various physical domains, including electromagnetic. PDs are temporally narrow, high-frequency, stochastic radiation sources. The Ultra-Wideband Vivaldi Antenna is the key element for the detection of PDs in power transformers and gas-insulated switchgear. However, they may be subject to different interference environments due to external sources of telecommunication radiation noise occupying the 2.4 GHz – 2.5 GHz band. Noise mixing with PD signals is challenging to resolve, especially for external sensors. Wi-Fi and Bluetooth signals from mobile devices easily overshadow faint PD signals. Band-reject frequency filters may be attached to the antenna, often at the detriment of the insertion loss. The integrated filter does not require any additional post-processing, making it less computationally demanding for smaller processors used in practice. Wi-Fi and Bluetooth degrade the PD signal, necessitating an integrated analog notch filter for noise removal. Therefore, an external ultra-wideband (UWB) Vivaldi antenna with an integrated noise-rejecting parasitic notch filter is designed, fabricated, and tested to detect PDs in electrical assets such as transformers, power cables, and GIS, with GIS being the focus in the experimental validation in this study. A comparative study of the proposed antenna is presented. This paper proposed an antenna that is designed to provide coverage of 95.516% of the 0.226 GHz – 3.506 GHz frequency band, with an average return loss of -16.04 dB and a peak gain of 5.5 in the working band, excluding the notched band. The peak return loss in the 2.4 GHz – 2.5 GHz rejection band is -2.68 dB, with an average attenuation of -35.74 dB. This wide coverage is demonstrated in this paper using simulation and experimentally.

8 November 2021 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
ADAhmad Darwish
Ahmad Darwish
GCGraeme Coapes
Graeme Coapes
Shady S. RefaatShady S. Refaat
Shady S. Refaat
Haitham Abu-RubHaitham Abu-Rub
Haitham Abu-Rub
HTHamid A. Toliyat
Hamid A. Toliyat
Accurate modeling of partial discharge (PD) within gas-insulated switchgear (GIS) has become of paramount significance to improve the utilization of ultrahigh frequency (UHF) sensors within such capital assets. Providing better insight on how electromagnetic (EM) waves propagate within GIS systems provides valuable information that can be used to determine the optimal allocation of UHF sensors. Thus far, most existing models are not considering the full complexity of the GIS systems due to the many associated challenges and the high computational demand of such system modeling. In this work, a GIS system is modeled using the Maxwell solver of COMSOL multiphysics. CIGRE sensitivity verification recommendations (CSVR) are used to inject UHF signals using an internal sensor. Then, two external sensors, placed on the outer belt of dielectric spacers, are used to capture the radiated EM waves. The electric field distribution at selected frequencies is presented and discussed under two operating conditions for disconnecting switches. The modeled GIS contains many barriers, including two bends, multiple sudden changes in the outer to inner diameters ratios, six dielectric spacers, and two disconnecting switches. Time-domain simulation results are also presented to provide an insight into the attenuation properties of EM waves due to the different barriers. Finally, a comparison between simulated and measured results has been carried out to verify the modeling accuracy. The results show that GIS systems form complex structures for the EM waves, and fully understanding the wave propagation can be tedious.

13 March 2024 in IEEE Transactions on Dielectrics and Electrical Insulation
Verified
Journal Article
Closed access
ADAhmad Darwish
Ahmad Darwish
Shady S. RefaatShady S. Refaat
Shady S. Refaat
Haitham Abu-RubHaitham Abu-Rub
Haitham Abu-Rub
HTHamid A. Toliyat
Hamid A. Toliyat
CKCelal F. Kumru
Celal F. Kumru
SKSayed Mohammad Kameli
Sayed Mohammad Kameli
Inspection of high voltage (HV) devices using ultra-high frequency (UHF) sensors has been predominantly employed for partial discharge (PD) detection and classification. This work reports implementing and testing a coplanar waveguide (CPW)-fed annular monopole antenna for PD detection. The 3D Maxwell solver of COMSOL multi-physics is used in this paper to optimize the antenna parameters and improve its performance. The original size of the antenna is reduced by about 47% utilizing structural symmetry and current resonances. The proposed antenna exhibits a wide bandwidth over frequencies ranging between 0.5 GHz - 3 GHz (except at 0.6 GHz, 1.2 GHz, and 2.75 GHz) due to the applied size reduction, using a maximum reflection coefficient of -10 dB (based on measurements). Nonetheless, the antenna performance is still effective over the full UHF range (considering that -6 dB is sufficient to detect PD activities). The effectiveness of the proposed antenna in PD detection is verified by testing the antenna’s performance against three common types of PD defects, namely, sharp point-to-ground discharge, surface discharge, and internal discharge. Furthermore, deep learning is implemented to classify the three defects with a total classification accuracy of 96%.