A wideband, low-profile, tightly coupled antenna array with a simple feed network is presented. The dipole and feed network in each unit cell are printed on both sides of a single RT/DuroidTM 6010 substrate with a relative dielectric constant of 10.2. The feed network, composed of meandered impedance transformer and balun sections, is designed based on Klopfenstein tapered microstrip lines. The wide angle impedance matching is empowered by a novel wideband metasurface superstrate. For the optimum design, scanning to 70° along the E-plane is obtained together with a very high array figure of merit, PA = 2.84. The H-plane scan extends to 55°. The broadside impedance bandwidth is 5.5:1 (0.80 – 4.38) GHz with an active VSWR value ≤ 2. The overall height of the array above the ground plane is 0.088 λL, where λL is the wavelength at the lowest frequency of operation. A prototype was fabricated and tested to confirm the design concepts.
The agile beam scanning ability is attractive feature of phased array over traditional mechanical array, but it is difficult to achieve perfect impedance matching in all the directions. Furthermore, phased array capable of wideband operation is desired in multi-function radar and modern communication systems. In this paper, a wideband tightly coupled array models equipped with two-layer metasurface is presented and its characteristics are investigated. The metasurface consists of two substrates each printed with different periodic metallic patches to accommodate wideband and wide angle applications. The results show that, with the assistance of this artificial metasurface, the phased array can operate over a 5:1 ratio impedance bandwidth (VSWR<;3) and the scanning angle is as large as 45°.