A low-noise synthesizer design in the millimeter-wave (mm-wave) range is complicated by the invariably large closed-loop gain and the high operation frequency of the voltage-controlled oscillator (VCO). To overcome these challenges, this work proposes a harmonic-mixing synthesizer system with a 188-dB figure-of-merit mm-wave VCO. The synthesizer extends the bandwidth to 5 MHz, thereby suppressing VCO noise. Importantly, DSM is not amplified by the $f_{\rm VCO}/f_{\rm ref}$ gain of the system. A prototype employing a 74-MHz reference achieves a $-$ 250-dB phase-locked loop (PLL) figure of merit with a measured 88-fs rms jitter.
16 December 2021 in IEEE Journal of Solid-State Circuits
The hybrid amplifier that combines a buck converter and a linear amplifier has been widely used as the envelope tracking (ET) supply modulator for ET power amplifier (PA) application. Instead of adding more large off-chip passives to raise the efficiency of the hybrid amplifier, this work uses a Viterbi-like trellis search (TS) digital signal processing (DSP) algorithm to find the optimal switching sequence for the buck converter in the hybrid amplifier, lowering RMS error current in the op-amp, and minimizing switching. For 20-MHz channels, it lowers op-amp current by 27%. The chip also supports 160-MHz channels without TS. With 802.11ax modulation, it raises total efficiency of a 2.5-GHz PA by 7.2% at 22.3 dBm, with EVM of -32.7 dB.