6 November 2023 in IEEE Transactions on Power Electronics
This letter develops a high-efficiency Class EF inverter under ultrawide load impedance variation. The inequality constraints are introduced to fully release the design potential when the partial zero voltage switching operation serves as the primary goal. The load-reactance insensitivity is discussed based on the inverter's robustness under circuit parameter variation. The switch voltage stress is also considered for the final tradeoff design. In the experiment, when the load resistance varies in [15, 40] $\Omega$ and load reactance varies [--17, 17] $\Omega$ , a 1-MHz inverter is built and shown to operate normally with efficiency above 92%.
14 July 2021 in IEEE Transactions on Industry Applications
This article explores the potential of relay coils (ReXs) to extend the horizontal charging area for planar inductive couplers. It focuses on the coupling mechanism and derives the equivalent coupling coefficient for model simplification. Based on the new model, a one-ReX coupler is proposed to enhance the coupling under large misalignment. Besides, the influence of coupling polarity change is evaluated and well compensated. In order to further enhance the coupling, a multiple-ReX technique is proposed and justified by a two-ReX coupler and a three-ReX coupler. The experimental result shows that the enhanced coupling coefficient helps maintain the efficiency to be above 92.5% under large misalignment when the one-ReX coupler is used. With three ReXs, the achieved efficiency is further improved by 2.3%.
5 October 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The single-switch resonant converter is attractive for low-cost high-frequency power conversion applications. However, the exiting design method needs complicated derivations to meet various practical demands, and it would become impossible as the circuit order increases. This paper incorporates the extended impedance method to evaluate the potential designs. The practical demands can be mathematically represented by the inequality constraints. Given the design variables, the proposed design is able to improve the steady-state performance (like the system robustness, voltage gain, load insensitivity, efficiency, current stress, and voltage stress for the existing resonant converters. A family of Class E inverters is designed to justify the generality and validity of the proposed design. The first case is a classical Class E inverter. The EIM-based design is able to improve the system robustness under 6% parameter variation. The second case is a Class E inverter with resonant input inductor. The EIM-based design is able to offer a wider voltage gain compared to the benchmark method. The last case is a Class E inverter using π network. Compared to the previous design approach, the proposed method is able to find a better design point, whose light-load efficiency is improved by 5%.
3 November 2025 in IEEE Transactions on Power Electronics
This letter presents a dual-frequency electrosurgical generator (ESG) based on a Class EF inverter, designed to accommodate ultra-wide impedance variations encountered during surgical procedures. The inherent load-insensitive characteristics of the Class EF inverter at a single frequency are further enhanced through the adoption of a dual-frequency operation strategy. To explore the design potential, inequality constraints and an impedance-based analysis method are employed. High operational efficiency is established as the primary design goal, and a simple dual-frequency and current control scheme is implemented to maintain stable output power. In the experimental validation, a 3/4-MHz ESG system is developed, achieving an efficiency above 63% and delivering 20 W of output power across a wide load range of 50–1500 $\Omega$.
29 July 2025 in IEEE Transactions on Industrial Electronics
This article is devoted to improving the coupling insensitivity of inductive power transfer (IPT) systems. Unlike previous studies that focused on establishing a stable source on the primary side (e.g., through a full-bridge inverter), this article leverages the load-sensitive characteristics of a single-switch resonant inverter to achieve a more stable system under varying coupling conditions. In addition, instead of designing the inverter and compensated coupler in a decoupled manner, the whole system is viewed as an ultrahigh-order resonant converter. Through simplification, the existing analytical inverter model is modified to fully explore the design potential for coupling-independent zero voltage switching and high robustness under parameter variations. The modified model also fills the gap in the holistic modeling of single switch IPT systems. In the experiment, a 60 W prototype is designed, when the coupling coefficient varies from 0.085 to 0.17, the output power maintains a fluctuation of 12%, with peak efficiency reaching 89.12%.