24 May 2021 in Strength of Materials and Theory of Structures
The problem of ensuring the reliability of the work of metal smoke and ventilation pipes and their bearing towers has recently gained special significance in connection with the large number of accidents at industrial enterprises. Methods of estimation of residual resource of bearing elements of high-rise buildings with various damage detected during diagnostics are developed. The formulas for determining the residual life of metal chimneys are given, the actual reserves of the residual resource are determined after long periods of operation for specific structures. In this work, variants of reinforcement of the elements of chimneys and towers with the most dangerous injuries (category A) – gaps, with cracks in the main metal and welds, with loss of the overall stability of the trunk of the pipe, have been developed and substantiated. On the basis of the analysis of the summation of internal and external stresses, we obtain formulas for calculating the elastic-deformation state of metal chimneys in the zone of through cracks and holes when performing construction reinforcement works by means of welds for overlays. The variants of amplification of smoke pipes after the destruction of stops of towers, which perceive wind loads, and as consequences of the loss of overall stability of the pipe are given. The research results make it possible to assess the reliability of metal smoke and ventilation pipes and their bearing towers after long operating periods, as well as used in the development of regulatory documents when assessing the technical condition and residual life of high-rise buildings.
30 May 2022 in Strength of Materials and Theory of Structures
The search for reserves of bearing capacity and improvement of the calculation of compressed-flexural metal columns is an urgent task. This makes it possible to more fully take into account the actual operation of structures and metal savings. An analysis of these and other issues is given in this paper on the basis of theoretical and experimental studies of life-size compressed-curved columns as part of a single-story and single-span industrial building with overhead cranes. The purpose of this work was to search for reserves of the bearing capacity of compressed-bent columns as part of the diameter of one-story single-span buildings with overhead cranes. As a result of the theoretical studies carried out, a method for calculating the stability of compression-bending columns as part of a cross section with crane loads has been developed. The technique takes into account the compatibility of the work of unevenly loaded columns in the frame and the shape of the deformation of the columns under the action of an active load. The estimated length calculated for frames with crane loads according to the proposed method is less than the estimated lengths according to current standards by 8-20%. To implement the tasks set in the experiment, a stand was developed and manufactured that allows testing the column as part of the frame and applying all types of vertical and horizontal loads to it. Experimental studies of full-scale compression-bending columns as part of a frame with the application of all loads that act on them (permanent, wind and crane) at different stages of the load, up to the exhaustion of the bearing capacity, made it possible to investigate the actual stress-strain state of the columns and their movement, bending of column base plates, development of current deformations in web flanges, local buckling of flanges and webs, general buckling of columns in the frame. For reconstructed industrial enterprises, a method for determining the reserves of bearing capacity for vertical load based on multiparameter loading of the diameter is proposed.
25 November 2019 in Eastern-European Journal of Enterprise Technologies
Determining the influence of physical nonlinearity of soil strength properties on the estimated base resistance
1 October 2019 in Strength of Materials and Theory of Structures
Deformation calculation of space reinforced concrete frame by FEM with allowance for vibrocreep of concrete
19 November 2025 in Solid State Phenomena
A variant of the mathematical theory of deformation of multilayer nonlinearly elastic (according to Kauderer) plates of arbitrary constant thickness with non-symmetric structure in thickness has been constructed. The transverse load on the horizontal faces can be arbitrary static. The components of the stress-strain state (SSS) and the boundary conditions on the lateral surface are functions of three spatial coordinates. Spatial boundary value problems for multilayer plates are reduced to two-dimensional using three-dimensional equations of the theory of elasticity, the Reissner variational principle, and the expansion of the components of the SSS into infinite mathematical series by combinations of Legendre polynomials within each layer. This approach differs significantly from the approaches of other authors. The main dependencies, boundary conditions and systems of equilibrium differential equations with high-order partial derivatives with respect to the displacement components are derived. All dependencies and equations contain nonlinear terms. The new methodology for constructing a variant of the nonlinear theory makes it possible to accurately satisfy the boundary conditions on the horizontal faces of the plate and on the lateral surface, and to accurately satisfy the conditions of rigid conjugation of adjacent layers. The system of equilibrium equations has a high order. An analytical method for solving these systems is proposed and developed. The method is based on algebraic, differential and operator transformations of the initial systems. They are reduced to two convenient defining systems: one describes the vortex edge effect with a refinement of the SSS, and the other describes a refined internal SSS with a potential edge effect. The order of the systems of differential equations does not depend on the number of layers, but depends only on the number of retained terms in the mathematical seriess. The internal SSS is separated from the potential edge effect. By the method of order reduction, the determining systems are reduced to second-order differential equations. This significantly simplifies the solution of boundary value problems. General solutions for all components of the SSS were found through general solutions of second-order differential equations. For plates with non-symmetric structure, the equations of skew-symmetric and symmetric deformation are interconnected, unlike plates with a symmetric structure. Numerical results are presented for a two-layer linearly elastic plate under cylindrical bending.