Mykola Savytskyi

Prof. Dr. Mykola Savytskyi


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 February 2025 in Energies
Verified
Journal Article
Open access
PDF file
RRRoman Rabenseifer
Roman Rabenseifer
MKMartina Kalivodová
Martina Kalivodová
Yevhen KononetsYevhen Kononets
Yevhen Kononets
Nataliia MahasNataliia Mahas
Nataliia Mahas
KMKatarína Minarovičová
Katarína Minarovičová
Volodymyr SemkoVolodymyr Semko
Volodymyr Semko
The operational energy efficiency of new buildings in the EU should be at the level of ultra-low or near-zero energy buildings. It is therefore relatively difficult to achieve further energy savings. However, the pre-operational phase—raw material sourcing, manufacturing, transportation, and construction—offers significant energy savings and greenhouse gas reduction opportunities, referred to as embodied energy and equivalent CO2 emissions. Unlike operational energy, no standard or legislative criteria have yet been established for embodied energy. Setting maximum embodied energy values converted to the unit of heated building area, accounting for building shape factor, and differentiating between high-mass and lightweight constructions are proposed. This study illustrates assessing environmental indicators based on building shape, highlighting the necessity of relative assessments over absolute values to favour energy efficiency. It also emphasizes that precise criteria should derive from authentic data collected during the energy certification and building permitting processes. Integrating assessments of embodied energy and operational energy demand facilitates a comprehensive evaluation of buildings’ environmental performance.


24 May 2021 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
PDF file
SYSerhii Yaroviy
Serhii Yaroviy
MSMykola Savytskyi
Mykola Savytskyi
SSSerhii Slobodianiuk
Serhii Slobodianiuk
The problem of ensuring the reliability of the work of metal smoke and ventilation pipes and their bearing towers has recently gained special significance in connection with the large number of accidents at industrial enterprises. Methods of estimation of residual resource of bearing elements of high-rise buildings with various damage detected during diagnostics are developed. The formulas for determining the residual life of metal chimneys are given, the actual reserves of the residual resource are determined after long periods of operation for specific structures. In this work, variants of reinforcement of the elements of chimneys and towers with the most dangerous injuries (category A) – gaps, with cracks in the main metal and welds, with loss of the overall stability of the trunk of the pipe, have been developed and substantiated. On the basis of the analysis of the summation of internal and external stresses, we obtain formulas for calculating the elastic-deformation state of metal chimneys in the zone of through cracks and holes when performing construction reinforcement works by means of welds for overlays. The variants of amplification of smoke pipes after the destruction of stops of towers, which perceive wind loads, and as consequences of the loss of overall stability of the pipe are given. The research results make it possible to assess the reliability of metal smoke and ventilation pipes and their bearing towers after long operating periods, as well as used in the development of regulatory documents when assessing the technical condition and residual life of high-rise buildings.

27 December 2019 in Bulletin of Prydniprovs’ka State Academy of Civil Engineering and Architecture
Verified
Journal Article
Open access
PDF file
SSS. V. Shatov
S. V. Shatov
MSMykola Savytskyi
Mykola Savytskyi
IMI. O. Marchenko
I. O. Marchenko
Постановка проблеми.Різні сфери виробництва застосовують інноваційні будівельні технології, направлені на поліпшення якості житла та зменшення його вартості, зведення сучасних промислових споруд. Ці технології передбачають практичне використання досягнень в ІТ-сфері, які забезпечують новітній напрямок у розвитку будівельних кластерів і розробленні стартапів. До таких технологій належать 3D-друку об’єктів різного призначення. 3D-друку – це процес відтворення реального об'єкту за зразком 3D-моделі. В основі технології 3D-друку лежить принцип пошарового створення твердої моделі. 3D-принтер дозволяє виводити тривимірну інформацію, тобто створювати певні фізичні об'єкти. У будівництві 3D-друку вимагає створення технологій, матеріалів, ефективного обладнання, нормативної бази.Мета дослідження – розвиток інноваційної технології 3D-друку в будівництві для створення новітніх стартапів у цій галузі.Результати дослідження. Інноваційний проект 3D-друку будівельних об'єктів пов'язаний з удосконаленням обладнання.Розроблено 3D-принтер у вигляді мостової конструкції з поворотним маніпулятором та різні види головок 3D-принтерів: з декількома екструдерами, встановленими на різних рівнях; з рухомим середнім екструдером для укладання елементів жорсткості між зовнішніми та внутрішніми стіновими конструкціями будівель; з можливістю регулювання параметрів шарів сировини, що укладається.Висновок. Інноваційні будівельні технології, зокрема, 3D-друку об’єктів, направлені на поліпшення якості житла та зменшення його вартості, зведення сучасних промислових споруд. Розглянуто різні типи будівельних 3D-принтерів, які мають недоліки та вимагають удосконалення. Розроблено перспективні конструкції 3D-принтерів та їх складових частин, які передбачають розширення технологічних властивостей обладнання та підвищення продуктивності.

30 May 2022 in Strength of Materials and Theory of Structures
Verified
Journal Article
Open access
PDF file
SYSerhii Yarovоy
Serhii Yarovоy
MSMykola Savytskyi
Mykola Savytskyi
SSSerhii Slobodianiuk
Serhii Slobodianiuk
The search for reserves of bearing capacity and improvement of the calculation of compressed-flexural metal columns is an urgent task. This makes it possible to more fully take into account the actual operation of structures and metal savings. An analysis of these and other issues is given in this paper on the basis of theoretical and experimental studies of life-size compressed-curved columns as part of a single-story and single-span industrial building with overhead cranes. The purpose of this work was to search for reserves of the bearing capacity of compressed-bent columns as part of the diameter of one-story single-span buildings with overhead cranes. As a result of the theoretical studies carried out, a method for calculating the stability of compression-bending columns as part of a cross section with crane loads has been developed. The technique takes into account the compatibility of the work of unevenly loaded columns in the frame and the shape of the deformation of the columns under the action of an active load. The estimated length calculated for frames with crane loads according to the proposed method is less than the estimated lengths according to current standards by 8-20%. To implement the tasks set in the experiment, a stand was developed and manufactured that allows testing the column as part of the frame and applying all types of vertical and horizontal loads to it. Experimental studies of full-scale compression-bending columns as part of a frame with the application of all loads that act on them (permanent, wind and crane) at different stages of the load, up to the exhaustion of the bearing capacity, made it possible to investigate the actual stress-strain state of the columns and their movement, bending of column base plates, development of current deformations in web flanges, local buckling of flanges and webs, general buckling of columns in the frame. For reconstructed industrial enterprises, a method for determining the reserves of bearing capacity for vertical load based on multiparameter loading of the diameter is proposed.

28 June 2024 in Building constructions. Theory and Practice
Verified
Journal Article
Open access
MSMykola Savytskyi
Mykola Savytskyi
ASAnton Smyrnov
Anton Smyrnov
МСМикола Савицький
Микола Савицький
According to the Kyiv School of Economics as of January 2024, the losses from the destruction and damage of buildings and structures as a result of military actions in Ukraine amount to at least 75 billion dollars. Now contractors carrying out the liquidation of the consequences of armed aggression are required to take measures to reuse construction waste. Taking into account the presence of natural crushed stone in concrete scrap, the question arises about the possibility of using crushed concrete in new construction. During the design a concrete mixture it is necessary to know such characteristics of aggregates as grain size composition, bulk density, specific density, voids, strength.Three mixtures of concrete were designed and aseries of cube samples were made from them to determine the specified characteristics of recycledcoarse aggregate obtained from crushed concrete on local materials. At the appropriate age the samples of origin concrete were crushed using a laboratory jaw crusher.The results of sieve analyses showed that ungraded mixtures of fine and coarse fractions do not meet the requirements of national standard due to the large content of coarse fractions. At the same time, in general, the granulometric composition of only coarse fractions meets the requirements of standards in Ukraine. The obtained bulk densities and specific densities differ in different fractions with a large dispersion even within the same fraction. The strength of the aggregate decreases with a decrease in grain sizes. Thus, the main factor that has a decisive influence on the properties of RCA and concrete with their use is the presence of residual mortar. The smaller the fraction of the RCA, the higher the residual mortar content, up to individual grains that are entirely composed of it. Therefore, one of the methods of improving the properties of RCA is to reduce the content of the residual mortar.