14 March 2023 in IEEE Transactions on Plasma Science
Launch efficiency has always been the focus of reluctance coil launchers research. In a traditional launch mode, the residual current in the drive coil creates a reverse force on the projectile. This is undesirable since the reverse force is in the opposite direction of movement, reducing the launch efficiency of the system. To address this problem, a multistage discharge circuit with the residual energy recovery and utilization mode is proposed in this article. As the projectile approaches the center of each stage of the drive coil, the current in the drive coil decays rapidly to zero by using the last stage capacitor to absorb the residual energy. The residual energy from the previous stages is eventually recovered by the last stage capacitor. This capacitor with residual energy is used to power the last stage drive coil of the reluctance coil launcher. This mode effectively suppresses the reverse force on the projectile and realizes the reuse of residual energy. Taking a four-stage reluctance coil launcher as an example, this article introduces the working principle of this mode in detail. The feasibility of the model is verified by finite-element simulation and experiments. Both simulation and experimental results show that this mode performs well in the recovery and reuse of residual energy and can effectively improve the launch efficiency of system.
21 April 2023 in IEEE Transactions on Plasma Science
The reluctance electromagnetic launchers mainly use the driving coils to generate high magnetic field to accelerate the ferromagnetic projectiles. Its advantages in accelerating large-mass projectiles have attracted considerable attention. However, during the projectile acceleration of conventional reluctance electromagnetic launchers, residual currents in the drive coils may produce opposing forces that reduce launch speed and efficiency. For this issue, an improved pulsed power supply circuit for reluctance electromagnetic launchers is proposed in this article based on a bridge-type capacitor circuit. The circuit can quickly reduce the residual current of the driving coil and recover the residual current energy. Since the circuit uses the same capacitor to power the drive coil and recover the remaining energy, the remaining energy recovered by the capacitor can be used as the initial energy storage for a new cycle. This can shorten the charging time for new cycles. In this article, the basic principle of the improved pulsed power supply circuit is introduced and analyzed in detail, and a comparative analysis is carried out with the traditional circuit through simulation. The results show that the new circuit has better characteristics in terms of residual energy recovery.
27 June 2023 in IEEE Transactions on Plasma Science
Launch efficiency is an important indicator to judge the performance of electromagnetic launchers. The goal of the conventional parameter optimization method for multistage launch is to maximize projectile kinetic energy in each stage acceleration. For reluctance coil launchers with residual recovery and utilization mode, the effect of the launcher parameters on the recovery energy should be considered in addition to the kinetic energy of the projectile. In this article, the feasibility of the model and the correctness of the original model are first verified by a four-stage launching experiment. Then, the influence of the drive coil parameters on the projectile acceleration and energy recovery is analyzed through theoretical analysis. In addition, a drive coil parameter optimization method for multistage reluctance coil launchers with residual energy recovery and utilization mode is proposed. By this method, the coil parameters of the original simulation model are optimized, and the simulation and experimental results before and after optimization are compared. The comparison results show that the optimization method proposed in this article integrates the relationship between projectile velocity and recovery energy, which can significantly improve the overall launch efficiency of the multistage system.