3 February 2021 in Journal of Fluid Mechanics
We study the effect of surfactant on the dynamics of a bubble bursting through an interface. We perform fully three-dimensional direct numerical simulations using a hybrid interface-tracking/level-set method accounting for surfactant-induced Marangoni stresses, sorption kinetics and diffusive effects. We select an initial bubble shape corresponding to a large Laplace number and a vanishingly small Bond number in order to neglect gravity, and isolate the effects of surfactant on the flow. Our results demonstrate that the presence of surfactant affects the dynamics of the system through Marangoni-induced flow, driving motion from high to low concentration regions, which is responsible for the onset of a recirculation zone close to the free surface. These Marangoni stresses rigidify the interface, delay the cavity collapse and influence the jet breakup process.
23 August 2021 in Journal of Fluid Mechanics
We study the effect of surfactants on the dynamics of a drop-interface coalescence using full three-dimensional direct numerical simulations. We employ a hybrid interface-tracking/level-set method, which takes into account Marangoni stresses that arise from surface-tension gradients, interfacial and bulk diffusion and sorption kinetic effects. We validate our predictions against the experimental data of Blanchette and Bigioni (Nat. Phys., vol. 2, issue 4, 2006, pp. 254–257) and perform a parametric study that demonstrates the delicate interplay between the flow fields and those associated with the surfactant bulk and interfacial concentrations. The results of this work unravel the crucial role of the Marangoni stresses in the flow physics of coalescence, with particular attention paid to their influence on the neck reopening dynamics in terms of stagnation-point inhibition, and near-neck vorticity generation. We demonstrate that surfactant-laden cases feature a rigidifying effect on the interface compared with the surfactant-free case, a mechanism that underpins the observed surfactant-induced phenomena.
2 July 2021 in Journal of Fluid Mechanics
The breakup of an interface into a cascade of droplets and their subsequent coalescence is a generic problem of central importance to a large number of industrial settings such as mixing, separations and combustion. We study the breakup of a liquid jet introduced through a cylindrical nozzle into a stagnant viscous phase via a hybrid interface-tracking/level-set method to account for the surface tension forces in a three-dimensional Cartesian domain. Numerical solutions are obtained for a range of Reynolds (, we expose the details of the spatio-temporal development of the vortical structures affecting the interfacial dynamics. A mushroom-like structure is formed at the leading edge of the jet inducing the generation of a liquid sheet in its interior that undergoes rupture to form droplets. These droplets rotate inside the mushroom structure due to their interaction with the prevailing vortical structures. Additionally, Kelvin–Helmholtz vortices that form near the injection point deform in the streamwise direction to form hairpin vortices, which, in turn, trigger the formation of interfacial lobes in the jet core. The thinning of the lobes induces the creation of holes which expand to form liquid threads that undergo capillary breakup to form droplets.
18 April 2023 in Journal of Fluid Mechanics
The effect of surfactants on the flow characteristics during rapid drop formation in a microchannel is investigated using high-speed imaging, micro-particle image velocimetry and numerical simulations; the latter are performed using a three- dimensional multiphase solver that accounts for the transport of soluble surfactants in the bulk and at the interface. Drops are generated in a flow-focusing microchannel, using silicone oil ( $4.6$ mPa s) as the continuous phase and a 52 % w/w glycerol solution as the dispersed phase. A non-ionic surfactant (Triton X-100) is dissolved in the dispersed phase at concentrations below and above the critical micelle concentration. Good agreement is found between experimental and numerical data for the drop size, drop formation time and circulation patterns. The results reveal strong circulation patterns in the forming drop in the absence of surfactants, whose intensity decreases with increasing surfactant concentration. The surfactant concentration profiles in the bulk and at the interface are shown for all stages of drop formation. The surfactant interfacial concentration is large at the front and the back of the forming drop, while the neck region is almost surfactant free. Marangoni stresses develop away from the neck, contributing to changes in the velocity profile inside the drop.
17 April 2023 in Journal of Fluid Mechanics
We study the effect of insoluble surfactants on the impact of surfactant-free droplets onto surfactant-laden thin liquid films via a fully three-dimensional direct numerical simulation approach that employs a hybrid interface-tracking/level-set method, and by taking into account surfactant-induced Marangoni stresses due to gradients in interfacial surfactant concentration. Our numerical predictions for the temporal evolution of the surfactant-free crown are validated against the experimental work by Che & Matar (Langmuir, vol. 33, 2017, pp. 12140–12148). We focus on the ‘crown-splash regime’, and we observe that the crown dynamics evolves through various stages: from the growth of linear modes (through a Rayleigh–Plateau instability) to the development of nonlinearities leading to primary and secondary breakup events (through droplet shedding modulated by an end-pinching mechanism). We show that the addition of surfactants does not affect the wave selection via the Rayleigh–Plateau instability. However, the presence of surfactants plays a key role in the late stages of the dynamics as soon as the ligaments are driven out from the rim. Surfactant-induced Marangoni stresses delay the end-pinching mechanisms to result in longer ligaments prior to their capillary singularity. Our results indicate that Marangoni stresses bridge the gap between adjacent protrusions promoting the adjacent protrusions' collision and the merging of ligaments. Finally, we demonstrate that the addition of surfactants leads to surface rigidification and consequently to the retardation of the flow dynamics.
13 November 2020 in Journal of Fluid Mechanics
CCCristian R. Constante-Amores
Cristian R. Constante-Amores
GGGabriel Farah Norões Gonçalves
Gabriel Farah Norões Gonçalves
+3
We study the effect of insoluble surfactants on the wave dynamics of vertically falling liquid films. We use three-dimensional numerical simulations and employ a hybrid interface-tracking/level-set method, taking into account Marangoni stresses induced by gradients of interfacial surfactant concentration. Our numerical predictions for the evolution of the surfactant-free, three-dimensional wave topology are validated against the experimental work of Park & Nosoko (AIChE J., vol. 49, 2003, pp. 2715–2727). The addition of surfactants is found to influence significantly the development of horseshoe-shaped waves. At low Marangoni numbers, we show that the wave fronts exhibit spanwise oscillations before eventually acquiring a quasi-two-dimensional shape. In addition, the presence of Marangoni stresses is found to suppress the peaks of the travelling waves and preceding capillary wave structures. At high Marangoni numbers, a near-complete rigidification of the interface is observed.