26 January 2017 in IEEE Transactions on Magnetics
In low-speed high-torque applications, gearboxes are widely used to amplify the output torque of electrical machines, which inevitably introduce side effects caused by mechanical contact. Consequently, a gear-free system has become increasingly interesting. Although a Vernier permanent-magnet machine has good torque capability, the low power factor is its weakness. This paper proposes a novel topology called the Vernier pseudo-direct-drive (VPDD) machine. A two-stepped design methodology is adopted by combining the subdomain analytical method and finite-element method (FEM). According to the results, the exact subdomain analytical model allows a quick pre-optimization of the structure, and the FEM can be used for further adjustment, dealing with the saturation effect and demagnetization. The optimized VPDD is capable of reaching a very high torque density of 91.8 Nm/L, and the torque ripple is negligible. Its power factor is 0.94.
10 October 2017 in IET Electric Power Applications
Magnetic gears, an alternative to conventional mechanical gearboxes, have been extensively studied in the last decade. By combining a magnetic gear and a conventional permanent‐magnet machine into one frame, different magnetic‐gear‐integrated permanent‐magnet machines with a high‐torque density are obtained, among which the pseudo‐direct‐drive permanent‐magnet machine features both a high‐torque capability and a good power factor with an acceptable structural complexity. However, the stator PM array in the conventional pseudo‐direct‐drive permanent‐magnet machine obstructs the magnetic path and reduces the excitation torque due to the coils. Another problem is the large permanent‐magnet amount which increases the overall cost. The authors propose a novel topology which has an improved torque capability under the same excitation current with a reduced permanent‐magnet amount. The working principles of the proposed machine are analysed theoretically using the linear‐material assumption to decouple the permanent‐magnet‐machine part and the magnetic‐gear part. Its performance is then validated by the finite‐element method. A comparison study with the conventional topology is conducted to show its merits.
12 March 2025 in IEEE Transactions on Dielectrics and Electrical Insulation
For electrical machine groundwall insulation (GI), degradation state representation (DSR) and degradation trajectory modelling are two main challenges for its acceler-ating-degradation-based remaining useful life (RUL) predic-tion. For the former, The RUL prediction accuracy based on GI’s electrical parameters are not satisfactory due to their weak correlation with GI’s residual breakdown voltage (RBV). For the later, GI’s multi-phase degradation characteristics brings great difficulty for its accurate lifecycle degradation model. Aim at solving these two problems, this paper pro-poses a novel GI’s DSR method based on the texture and color of GI materials’ microscopic images after different ag-ing time. This method adopts 9 grayscale characteristics to establish their quantitative relationship with RBV by using Random Forest algorithm. And then, a two-phase acceler-ated degradation model based on Wiener process for RBV is developed to describe the degradation trajectory of GI’s RBV. Finally, this paper validates the prediction accuracy of the proposed model based on accelerated degradation test-ing. The results show that the proposed model significantly improves the prediction accuracy of the GI’s RUL of the elec-trical machine.