Peigen Zhou

Peigen Zhou

Auto-generated profile, based on publicly available information

Peigen Zhou

State Key Laboratory of Millimeter Waves, Southeast University, Nanjing, China

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 July 2021 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
XLXingcun Li
Xingcun Li
WCWenhua Chen
Wenhua Chen
PZPeigen Zhou
Peigen Zhou
YWYunfan Wang
Yunfan Wang
FHFei Huang
Fei Huang
ZFZhenghe Feng
Zhenghe Feng
This article presents a broadband THz power amplifier (PA) operating close to the maximum oscillation frequency ( f max ) with proposed power combining and stagger-tuned gain boosting techniques. A compact broadband power combiner based on the compensated three-conductor transmission line (T-line) balun is proposed to simultaneously achieve broadband matching and power combining. A 4-stage stagger-tuned gain boosting amplifier operating closely to f max is investigated to achieve a flattened power gain. Based on the proposed techniques, a broadband 300-GHz PA is implemented in a 130-nm SiGe BiCMOS process with f t / f max = 350/450 GHz. It exhibits a peak gain of 15 dB and 3-dB bandwidth of 67 GHz (247–314 GHz) with 2.5 V supply voltage. At 290 GHz, a 5-dBm maximum output power P OUT-MAX was measured with a 1-dB compressed output power OP −1 dB of 3.3 dBm and a maximum PAE of 1.19%. The measured output power P OUT-MAX and OP -1dB of the PA are 2.2–5 dBm and 0.6–3.3 dBm over 250–300 GHz, respectively. To the best of our knowledge, this PA achieves the highest operational frequency and widest bandwidth compared with other works in SiGe/CMOS process operating closely to f max .

9 August 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
ZLZekun Li
Zekun Li
JCJixin Chen
Jixin Chen
DHDebin Hou
Debin Hou
HLHuanbo Li
Huanbo Li
LWLong Wang
Long Wang
Wei HongWei Hong
Wei Hong
A time-division duplex (TDD) transmit/receive (T/R) millimeter-wave (mm-wave) front-end in 0.13-μm SiGe BiCMOS for fifth generation (5G) is presented. The front-end is composed of a power amplifier (PA), a low noise amplifier (LNA), and a single-pole double-throw (SPDT) switch. At mm-wave bands, the traditional SPDT switch limits the output power of the front-end in transmit mode. In this article, an asymmetric SPDT switch is proposed with high-power-handling capability (simulated OP $_{{1,dB}} > 28$ dBm), low insertion loss, and compact structure at 24-30 GHz. A balanced architecture is used to implement a high gain and high linearity PA with excellent input/output return losses and load-variation insensitivity. The effect of the feedback capacitor in the base of the cascode stage has been analyzed. The standalone PA achieves OP $_{{1,dB}}$ /peak PAE > 16.9 dBm/18.7% across 24-30 GHz and the OP $_{{1,dB}}$ /peak PAE still exceeds >15.9 dBm/16.3% including the switch loss and compression. 5G NR FR2 64-QAM modulation tests demonstrate the high linearity of the balanced PA. At 28 GHz, the standalone PA shows the EVM of -29.93 dB/-26.06 dB with an average output power ( $P_{{avg}}$ ) of 10.15 dBm/12.16 dBm. The front-end in transmit mode shows the EVM of -29.63 dB/-26.02 dB with an average output power of 7.76 dBm/9.59 dBm. A wideband LNA is designed and exhibits a measured gain of 26 dB with a 3-dB bandwidth of 19-35 GHz, a noise figure (NF) < 5.3 dB at 24-30 GHz including the switch loss. The proposed front-end achieves high linearity in transmit mode and low NF in receive mode.

16 February 2021 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
ZWZuojun Wang
Zuojun Wang
DHDebin Hou
Debin Hou
PZPeigen Zhou
Peigen Zhou
HLHuanbo Li
Huanbo Li
ZLZekun Li
Zekun Li
Wei HongWei Hong
Wei Hong
This letter presents a multiband switchable low-noise amplifier (LNA) in the 0.1- μm GaAs pHEMT process. Employing a new varactor-based tunable network as the interstage matching circuit, the operation bands can be tuned consecutively and cover the 5G millimeter-wave frequency bands N257/N260. The proposed tunable structure functions well without sacrificing noise performance or increasing dc consumption and chip area. In the entire operation band from 26.5 to 41 GHz, the LNA achieves a small-signal gain of over 24 dB and a noise figure (NF) of less than 2.9 dB. The measured result shows a small-signal gain of 25.1 dB/27.7 dB and an NF of 2.4 dB/2.8 dB at 28 GHz/39 GHz. The measured input 1-dB compression point (IP 1dB ) is -18.3 dBm/-17 dBm at 28 GHz/39 GHz. The measured input-referred intercept point (IIP 3 ) is -8.8 dBm/-8.5 dBm at 28 GHz/39 GHz. The LNA has a chip size of 1.6 mm ×1 mm, and the total power consumption is 74 mW. To the best of our knowledge, the proposed LNA is the state-of-the-art Ka-band switchable LNA and has similar performance compared with single-band LNAs using the same technology.

25 August 2020 in IEEE Transactions on Terahertz Science and Technology
Verified
Journal Article
Closed access
HLHuanbo Li
Huanbo Li
JCJixin Chen
Jixin Chen
DHDebin Hou
Debin Hou
PZPeigen Zhou
Peigen Zhou
JYJiayang Yu
Jiayang Yu
Wei HongWei Hong
Wei Hong
This article presents a 250-GHz SiGe amplifier composed of three differential cascode stages in a 0.13-μm SiGe BiCMOS technology (f T /f MAX = 300/500 GHz). The Marchand balun is utilized to implement single-ended to differential signal transformation for its superior performance over the transformer-based balun at sub-THz frequencies, which has been investigated and verified through electromagnetic (EM) simulations. A stair-like interconnection method and conventional positive feedback technique are used to improve the inherent gain of the active device. The proposed amplifier exhibits a record S 21 of 21.5 dB at 252 GHz and a 3-dB bandwidth of 11 GHz with the capability of gain control. The measured OP 1dB is -3.7 dBm with the corresponding power added efficiency (PAE) of 0.3%, and the saturated output power is estimated to exceed 0 dBm at 252 GHz. The overall power consumption of the chip is 149 mW. Along with remarkable gain and output power, the compact amplifier is suitable to be adopted as an output block in the sub-THz transmitters.

25 July 2022 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
JYJiayang Yu
Jiayang Yu
JCJixin Chen
Jixin Chen
PZPeigen Zhou
Peigen Zhou
HLHuanbo Li
Huanbo Li
ZWZuojun Wang
Zuojun Wang
Wei HongWei Hong
Wei Hong
This article presents a broadband sub-terahertz (THz) power amplifier (PA) with a low-loss four-way power combiner. The proposed power combiner consists of an improved zero-degree combiner (ZDC) and a three-conductor Marchand balun simultaneously achieving broadband matching and power combining. The proposed three-conductor Marchand balun adopts a dual- $LC$ tank technique by merging two resonators, and it can be equivalent to a transformer-based multi-resonating network. The power distribution is realized by one input power splitter generating two pairs of differential signals and two parallel 1-to-2 active power splitters. This hybrid distribution driving network further enhances efficiency and power gain. Based on these improvements, a high-output-power sub-THz PA with superior efficiency has been fabricated in the 130-nm SiGe bipolar complementary metal oxide silicon field effect transistor (BiCMOS) technology. The three-stage PA achieves a peak power gain of 16.4 dB, 3-dB small-signal gain bandwidth of 52 GHz from 211 to 263 GHz, a measured maximum saturated output power of 14.7 dBm at 224 GHz, and a peak power-added efficiency (PAE) of 3.13% at 220 GHz. The folded input splitter and extremely compact power combining methodology lead to a core area of 770 $\mu \text{m}\,\,\times \,\,280\,\,\mu \text{m}$ .

20 August 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
JYJiayang Yu
Jiayang Yu
JCJixin Chen
Jixin Chen
PZPeigen Zhou
Peigen Zhou
ZLZekun Li
Zekun Li
HLHuanbo Li
Huanbo Li
Wei HongWei Hong
Wei Hong
This article presents a compact 300-GHz transmitter front end manufactured in a 130-nm SiGe BiCMOS process. The transmitter consists of a 240-GHz amplifier multiplier chain (AMC) and a modified 300-GHz Gilbert mixer. Limited by the space between top two thick metal layers of the SiGe process, the coupling coefficient between the coils, which form a transformer-based balun, is usually small at subterahertz (THz). Therefore, the vertical or horizontal coupling single-turn transformer-based balun will exhibit large insertion loss at around 300 GHz. In this work, a self-shielded Marchand balun (SSMB) with an enhancement to the coupling coefficient is proposed, which is realized by a novel multilayer metal topology with self-shielded coupling (SSC). The AMC is composed of a 120-GHz frequency doubler, a 120-GHz two-stage power amplifier (PA), and a two-way power synthesis balanced frequency doubler. This AMC exhibits a measured peak output power of 5.5 dBm at 252 GHz, with 48-GHz 3-dB bandwidth from 212 to 260 GHz. The transmitter chip achieves a maximum output power of −4.1 dBm at 300 GHz and delivers an output power better than −10 dBm from 270 to 315 GHz. Over the 30-GHz 3-dB bandwidth from 280 to 310 GHz, the transmitter shows a maximum OP 1dB of −6.5 dBm at 296 GHz, a peak conversion gain of −11.2 dB at 298 GHz, and a local oscillator (LO)-to-RF leakage rejection better than 40 dB, with only 300-mW dc power consumption. Compared with other state of the arts, the transmitter exhibits a comparable output power among silicon-based transmitters near 300 GHz.