30 September 2019 in Journal of Lightwave Technology
In this work, based on a conventional silicon photonic travelling-wave Mach-Zehnder modulator (MZM) with a 3-dB bandwidth of 22.5GHz, we experimentally demonstrate ultra-high speed optical interconnects with Nyquist shaped pulse amplitude modulation (PAM) signals. For bandwidth-limited systems, a two-tap digital post filter is employed to suppress the equalization-enhanced high frequency noise. The post filter induced inter-symbol interference (ISI) is subsequently eliminated by maximum likelihood sequence detection (MLSD). Enabled by the post filter and MLSD, we achieve 200Gb/s (80Gbaud) PAM-6 signal direct detection (DD) transmission over 1km standard single-mode fiber (SSMF) with a bit-error rate (BER) below the 20% hard-decision forward error correction (HD-FEC) threshold of 1.5×10 $^{-2}$ . For PAM-4 format, we successfully transmit 192Gb/s (96Gbaud) and 176Gb/s (88Gbaud) signals over 1km and 2km SSMF, respectively, with BERs lower than the 20% HD-FEC threshold. For PAM-8 format, 192Gb/s (64Gbaud) and 168Gb/s (56Gbaud) signals are generated at back-to-back (BTB) and transmitted over 1km SSMF, respectively. To our best knowledge, we achieve the highest single lane bitrates ever reported for single polarization PAM-4/6/8 signal generation and DD transmission with all-silicon MZM. The flexible receiver-side digital signal processing (DSP) can significantly enhance the performance of silicon MZM, which provides a promising solution for future single lane 200G data-center interconnects.
17 August 2022 in Journal of Lightwave Technology
Polarization splitter-rotators (PSRs) are crucial components for controlling the polarization states of the input light in photonic integrated circuits. In this paper, we designed, fabricated and characterized a high-performance CMOS-compatible O-band PSR based on silicon-on-insulator (SOI) platform by using inverse design technique. The PSR mainly consists of a polarization rotator designed by our new proposed bi-level shape adjoint method and a mode demultiplexer designed by topology adjoint method. The device robustness against fabrication errors is significantly strengthened by properly designing optimization strategies. The proposed PSR displays a low insertion loss (<1dB) and low crosstalk (<−20 dB) within a bandwidth of 50 nm by measurements. The device footprint is 3×17 µm, making this the smallest PSR based on standard silicon photonic platforms with no extra layers or an air cladding.
29 January 2021 in IEEE Journal of Selected Topics in Quantum Electronics
We review high baud rate operation of silicon photonic modulators with emphasis on short-reach and metro-haul applications. The current status of both devices and digital signal processing are discussed. The basic design of a typical carrier-depletion-based dual-drive traveling-wave Mach-Zehnder modulator (TW-MZM) is studied by simulation. Based on an all-silicon TW-MZM, we report the transmission experiments of high baud rate single sideband 4-ary pulse amplitude modulation (PAM-4) signals with linear equalization and artificial neural network based equalization, respectively. Our work indicates all-silicon modulators can address the requirements of future optical communication systems operating at 100 Gbaud.
13 February 2019 in IEEE Photonics Technology Letters
4 December 2020 in Journal of Lightwave Technology
Kerr nonlinearity in long distance fiber-optic link imposes a fundamental limitation to the capacity of wavelength division multiplexed (WDM) optical communication systems. Solving the inverse-propagating nonlinear Schrodinger equation (NLSE) is in principle a fundamental methodology to mitigate fiber nonlinear impairments. However, solving multi-channel coupled NLSE is too complexed to be implemented commercially. It is of great importance to compensate for nonlinear distortions in high baud-rate WDM systems based on the information of one single target channel. In this paper, we experimentally study fiber nonlinearity mitigation in an 8×512Gb/s (64Gbaud) polarization division multiplexed (PDM) 16-ary quadrature amplitude modulation (16-QAM) Nyquist-WDM system with 960km standard single mode fiber (SSMF) loop transmission. The digital back-propagation (DBP) algorithm based on the target channel is applied, which can compensate for intra-channel nonlinearity. The inter-channel nonlinearity of cross phase modulation (XPM) induces nonlinear polarization scattering and nonlinear phase noise, which are partially correlated over adjacent pulses in high baud-rate systems. We propose an advanced nonlinear polarization crosstalk canceller (NPCC) with a novel decision feedback (DF) update strategy that is called the DF-NPCC, which incorporates the iterative process of the least mean square (LMS) algorithm and can thus mitigate the correlated nonlinear polarization crosstalk and nonlinear phase noise. Through nonlinearity mitigation, the DBP together with the DF-NPCC can achieve a 0.77 dB Q 2 factor promotion. The DF-NPCC can suppress the remaining nonlinear distortions after the single channel DBP, which corresponds to a 0.36 dB Q 2 factor improvement due to inter-channel nonlinear mitigation. Our work indicates XPM distortions can be mitigated with low complexity digital signal processing such as the DF-NPCC based on the single channel information, which provides an attractive solution to compensate inter-channel fiber nonlinearity in high baud-rate Nyquist-WDM systems.
1 October 2020 in Journal of Lightwave Technology
We report >100-Gb/s direct-detection (DD) transmission using an integrated silicon optical receiver, which comprised a fully-differential 28-nm complementary metal-oxide-semiconductor (CMOS) transimpedance amplifier (TIA) wire-bonded to a Silicon-Germanium (SiGe) balanced photodiode (PD). The fully-differential TIA architecture enabled significant bit-error-rate (BER) and signal-to-noise ratio improvements over a single-output TIA design when introducing it to the DD transmission. We experimentally validated its effectiveness in both back-to-back (B2B) and 2-km long standard single-mode fibre (SSMF) links using 50/100-Gb/s signals, including Nyquist on-off keying (OOK), Nyquist 4-ary pulse amplitude modulation (PAM4), uniformly-loaded DD optical orthogonal frequency division multiplexing (DDO-OFDM) and adaptively-loaded DDO-OFDM. Furthermore, we demonstrate that the integrated optical receiver was capable of balancing the trade-off between its electrical bandwidth and transimpedance gain by simply adjusting a voltage supply to the TIA. Without the need for optical amplification and while keeping the BERs below the 7% forward error correction limit, up to 173.22-Gb/s and 139.86-Gb/s adaptively-loaded DDO-OFDM transmission was achieved for B2B and 2-km transmission, respectively. The demonstrated results highlight the potential of the integrated silicon optical receiver, fabricated using the standard CMOS process for high-speed and short-reach optical interconnects.