1 January 2012 in Procedia Engineering
ASAbdul Rahim Mahamad Sahab
Abdul Rahim Mahamad Sahab
Alumina-titania coatings produced by plasma spray processes are being developed for a wide variety of applications that require resistance to wear, erosion, cracking and spallation. Consideration of parameters setting will develop reliable coatings with high performance properties for demanding coating application. Al2O3 3%wt TiO2 coating was produced onto metal substrate using Praxair Plasma Spray System with SG-100 Gun. This paper discusses the experimental and testing performance analysis of the coating which prepared based on three varied process parameters (current, powder flow rate and stand-off-distance). With the varied coating parameters, test results showed that increasing current from 550A to 650A and powder flow rate from 22.5g/min to 26g/min increased the performance of mechanical properties of coating (adhesion strength & hardness) and gave the lowest friction coefficient value (i.e. best wear resistance) of coating. Increasing stand-off-distance from 75mm to 90mm also increased hardness performance and provided the lowest friction coefficient value of coating. However increasing stand-off-distance has decreased adhesion strength at setting powder flow rate of 26g/min and 650A current. The behavior of such parameters setting significantly influenced the production of optimum Al2O3 3%wt TiO2 coating onto metal substrate
1 January 2013 in Procedia Engineering
MMMuhamad Hafiz Abd Malek
Thermal arc spray aluminium coating is widely used in recent years as a protective coating due to its capability to withstand high temperature and cost effective process. It has been utilized by many industrialists in oil and gas sector, where most of the applications are in atmospheric condition. Organic coating could fail prematurely and result in corrosion progression from coating failure. This paper will discuss the overall framework of experiments to justify the performance of thermal arc spray aluminium coating. In this research 99.5% aluminium was used as the coating material in wire form of 2.3mm diameter using wire arc spray method. Six samples were prepared with different thickness of coating from 200 to 400 microns. Mechanical tests such as Pull-off Test and Bend Test were performed to evaluate the coating performance. The tests indicated that all samples had passed the minimum requirement with an average of 10MPa for Pull off Test and no crack appeared in Bend Test. Hardness Test and Surface Morphology Analysis were also performed with coating thickness ranged between 350-400 microns to inspect and evaluate the coating properties. The hardness test showed an average value of 209.7 HV. Surface morphology analysis using FE-SEM indicated low porosity structures and high content of oxide. Thus, from the overall results and analysis it was found that the thermal arc spray can perform coating duty effectively. Further research may be conducted to explore more on the potentials of thermal arc spray aluminium coating such as the analysis on different coating thickness and coating materials
6 June 2013 in IOP Conference Series: Materials Science and Engineering
MMMuhamad Hafiz Abd Malek
1 January 2012 in Procedia Engineering
1 January 2014 in International Journal of Materials Engineering Innovation
MMMuhamad Hafiz Abd Malek
Usage of thermal spray coating for corrosion protection was started since early 1900. Even though it was successful, the application was limited. In recent years, most industries especially oil and gas companies have selected the thermal spray wire arc coating as a corrosion protection for steel structure. Advancement in coating research causes major developments in coating processes, equipments, and raw materials for coating. It leads to further expansion in functional coatings and applications scope from conventional coating to specialised industries. The selection of the thermal arc spray coating is due to its ability to act as an effective corrosion protection, able to withstand high process temperature, and cost saving. Previous research revealed that thermal arc spray coating provides better coating characteristics compared to other method of sprays. This paper reviews some critical part of thermal arc spray coating by discussing the process parameter of thermal arc spray technology and quality control of coating. Comparison between coating material usage was reviewed to determine the best applied material coating in certain critical environment. Coating performance against corrosion, wear and special characteristic of coating are discussed. The field application of arc spray technology is presented.
27 September 2010 in Applied Physics Letters
This paper reports a method of determining the system matrix of a nearest neighbor coupled array of micro/nanomechanical resonators. The simple method requires contacts to only one element of the array to determine two sets of eigenvalues related to the system matrix. The elements of the system matrix are then determined from these eigenvalues. This system matrix can then be used to determine the characteristics of the individual resonators or as the starting point for a perturbation analysis to determine the changes observed when a functionalized array of resonators is used as a sensor.