23 November 2022 in Nature Communications
High thermal conductivity electronic materials are critical components for high-performance electronic and photonic devices as both active functional materials and thermal management materials. We report an isotropic high thermal conductivity exceeding 500 W m−1K−1 at room temperature in high-quality wafer-scale cubic silicon carbide (3C-SiC) crystals, which is the second highest among large crystals (only surpassed by diamond). Furthermore, the corresponding 3C-SiC thin films are found to have record-high in-plane and cross-plane thermal conductivity, even higher than diamond thin films with equivalent thicknesses. Our results resolve a long-standing puzzle that the literature values of thermal conductivity for 3C-SiC are lower than the structurally more complex 6H-SiC. We show that the observed high thermal conductivity in this work arises from the high purity and high crystal quality of 3C-SiC crystals which avoids the exceptionally strong defect-phonon scatterings. Moreover, 3C-SiC is a SiC polytype which can be epitaxially grown on Si. We show that the measured 3C-SiC-Si thermal boundary conductance is among the highest for semiconductor interfaces. These findings provide insights for fundamental phonon transport mechanisms, and suggest that 3C-SiC is an excellent wide-bandgap semiconductor for applications of next-generation power electronics as both active components and substrates.
9 September 2021 in Advanced Materials
13 March 2017 in Applied Physics Letters
Diamond/Si junctions have been achieved by surface activated bonding method without any chemical and heating treatments. Bonded interfaces were obtained that were free from voids and mechanical cracks. Observations by using transmission electron microscopy indicated that an amorphous layer with a thickness of ∼20 nm across the bonded interface was formed, and no structural defects were observed at the interface. The amorphous layer of the diamond side was confirmed to be the mixture of sp2 and sp3 carbons by electron energy loss spectroscopy analyzation. The sp3/(sp2 + sp3) ratio estimated from the X-ray photoemission spectra decreased from 53.8% to 27.5%, while the relative intensity of sp2 increased from 26.8% to 72.5% after the irradiation with Ar fast beam which should be predominantly attributable to the diamond-graphite conversion.
25 November 2024 in Applied Physics Reviews
The evolution of power and radiofrequency electronics enters a new era with (ultra)wide bandgap semiconductors such as GaN, SiC, and β-Ga2O3, driving significant advancements across various technologies. The elevated breakdown voltage and minimal on-resistance result in size-compact and energy-efficient devices. However, effective thermal management poses a critical challenge, particularly when pushing devices to operate at their electronic limits for maximum output power. To address these thermal hurdles, comprehensive studies into thermal conduction within semiconductor heterostructures are essential. This review offers a comprehensive overview of recent progress in (ultra)wide bandgap semiconductor heterostructures dedicated to electronics cooling and are structured into four sections. Part 1 summarizes the material growth and thermal properties of (ultra)wide bandgap semiconductor heterostructures. Part 2 discusses heterogeneous integration techniques and thermal boundary conductance (TBC) of the bonded interfaces. Part 3 focuses on the research of TBC, including the progress in thermal characterization, experimental and theoretical enhancement, and the fundamental understanding of TBC. Parts 4 shifts the focus to electronic devices, presenting research on the cooling effects of these heterostructures through simulations and experiments. Finally, this review also identifies objectives, challenges, and potential avenues for future research. It aims to drive progress in electronics cooling through novel materials development, innovative integration techniques, new device designs, and advanced thermal characterization. Addressing these challenges and fostering continued progress hold the promise of realizing high-performance, high output power, and highly reliable electronics operating at the electronic limits.
14 November 2023 in Small
9 February 2015 in Japanese Journal of Applied Physics
The electrical properties of p-GaAs/n + -Si, p + -Si/n-GaAs, p + -GaAs/n + -Si, p + -Si/n + -GaAs, n + -Si/n + -GaAs, and p + -Si/p + -GaAs junctions fabricated by surface-activated bonding (SAB) were investigated. An amorphous layer with a thickness of 3 nm was found across the bonding interface without annealing. The current–voltage ( I – V ) characteristics of p + -GaAs/n + -Si, p + -Si/n + -GaAs, n + -Si/n + -GaAs, and p + -Si/p + -GaAs junctions showed excellent linearity. The interface resistance of n + -Si/n + -GaAs junctions was found to be 0.112 Ω·cm 2 , which is the smallest value observed in all the samples. The resistance decreased with increasing annealing temperature and decreased to 0.074 Ω·cm 2 after the junction annealing at 400 °C. These results demonstrate that n + -Si/n + -GaAs junctions are suitable for the connection of subcells in the fabrication of tandem solar cells.