André Bernardus Joseph Kokkeler

André Bernardus Joseph Kokkeler

Auto-generated profile, based on publicly available information

André Bernardus Joseph Kokkeler

Radio Systems Group, University of Twente, Enschede, the Netherlands

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 August 2023 in IEEE Transactions on Instrumentation and Measurement
Verified
Journal Article
Closed access
KMKai Mao
Kai Mao
Qiuming ZhuQiuming Zhu
Qiuming Zhu
YQYanheng Qiu
Yanheng Qiu
XLXin Liu
Xin Liu
MSMaozhong Song
Maozhong Song
YMYang Miao
Yang Miao
With the rapid development and broad applications of unmanned aerial vehicle (UAV) based wireless stations in the sky, fundamental understanding and characterization of the realistic air-to-ground (A2G) communication link properties are crucial. In this paper, a UAV-aided channel sounder with a real-time processing hardware system is developed for highly dynamic and non-stationary A2G channel measurements. In the hardware system, a global positioning system (GPS) -based triggering signal is designed, the equivalent antenna pattern affected by UAV airframe is considered, and an appropriate sounding signal is selected, in order to improve the accuracy of measured channel impulse response (CIR). Moreover, real-time hardware processing algorithms for raw channel data, i.e., CIR extraction, system response elimination (SRE), power loss recovery (PLR), and adaptive multi-path component (MPC) recognition are developed and implemented on a single field-programmable gate array (FPGA) chip. In this way, the required storage size of channel data and the processing time for one slice of CIR is greatly decreased, which can meet the requirement of non-stationary A2G channel measurement with a high sampling rate and long-time measurement. A commercial channel emulator is used to reproduce controllable channels and verify the performance of developed channel sounder. Finally, the developed channel sounder is applied to carry out A2G measurement campaigns at 3.5 GHz in a campus scenario. The channel characteristics, i.e., path loss (PL), K-factor, and path angle are analyzed. The measured channel characteristics are consistent with existing measurements under a similar scenario. The estimated path angles are also validated by the theoretical results. Thus, the channel sounder can be used to capture the non-stationary A2G channel characteristics for the system design and algorithm optimization of A2G communications.

8 December 2022 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
SYShubham Yadav
Shubham Yadav
PLPatrice Abbie D. Legaspi
Patrice Abbie D. Legaspi
MAMark S. Oude Alink
Mark S. Oude Alink
AKAndré B. J. Kokkeler
André B. J. Kokkeler
BNBram Nauta
Bram Nauta
Voice Activity Detection (VAD) is a technique used to identify the presence of human voice in an audio signal. It is implemented as an always-on component in most speech processing applications. As speech is absent most of the time, this component typically dominates the overall average power consumption of the system (excluding microphone). The widespread usage in speech applications and the need for ultra low power VAD have led to a plethora of algorithms and implementations in the hardware domain, necessitating a comprehensive study and analysis to understand (real-time) requirements, different design parameters, testing strategies, but also to identify design trends, challenges and guidelines for future implementations and testing of VAD devices. A scoping review was conducted to identify the articles for hardware implementations of VAD from January 2010 - December 2021, the results of which are presented in this article. The results highlight a big design space being used for VAD along with a lack of standard testing methodology and usage of application-dependent performance metrics. An increased usage of filter-based feature extractors along with neural-network-based classifiers is observed. Due to lack of standardisation, no other trends can be established from the results. A set of rules and guidelines are therefore provided to facilitate the future development and benchmarking of VADs.

27 May 2021 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
MAMasoud Abbasi Alaei
Masoud Abbasi Alaei
SGSajad Golabighezelahmad
Sajad Golabighezelahmad
PBPieter-Tjerk de Boer
Pieter-Tjerk de Boer
FVFrank E. van Vliet
Frank E. van Vliet
EKEric A. M. Klumperink
Eric A. M. Klumperink
AKAndre B. J. Kokkeler
Andre B. J. Kokkeler
Exposed to strong cochannel/adjacent-channel interference, digital multiple-input-multiple-output (MIMO) receivers require high-dynamic-range analog-to-digital converters (ADCs). Hybrid beamforming featuring spatial filtering before the ADCs can adaptively mitigate interference in both the analog and digital domains; hence relaxing the required dynamic ranges of the ADCs. This article demonstrates the effectiveness of hybrid beamforming in this mitigation utilizing adaptive minimum mean square error (MMSE) and error vector magnitude (EVM) as an optimization criterion. Extensive EVM measurements are carried out with a conductive setup using a four-element 22-nm FD-SOI CMOS prototype MIMO receiver chip to verify the performance of the adaptive MMSE algorithm. Over-the-air (OTA) measurements with a linear four-element dipole antenna array with half-wavelength spacing in the 2.4-GHz industrial scientific and medical (ISM) band quantify the improvement for real-world scenarios, e.g., having a multipath propagation channel and mutual coupling between the antenna array elements. OTA results show that a rejection of 22.5 and 24.5 dB can be achieved on average in an in-door laboratory environment utilizing vector modulator (VM) constellations with 16 and 64 points, respectively.

13 December 2022 in IEEE Transactions on Electromagnetic Compatibility
Verified
Journal Article
Closed access
MMMHD Zaher Mahfouz
MHD Zaher Mahfouz
RVRobert Vogt-Ardatjew
Robert Vogt-Ardatjew
AKAndre B. J. Kokkeler
Andre B. J. Kokkeler
AGAndrés Alayón Glazunov
Andrés Alayón Glazunov
In recent years, promising results have been reported with the vibrating intrinsic reverberation chamber (VIRC) combining performance and cost-efficiency for electromagnetic compatibility (EMC) measurements. This also makes it a potentially attractive solution for over-the-air (OTA) testing, which is yet to be investigated. Therefore, this article proposes the first systematic and thorough methodology to characterize the VIRC for use in EMC and OTA testing of wireless baseband algorithms of narrow-band single-input single-output channels. This methodology has been developed to measure and estimate the channel first- and second-order temporal and spectral characteristics taking into consideration the effect of different carrier frequencies, rotational speeds of VIRC motors, and loading conditions. It is then applied to a channel setup inside a VIRC for a preliminary investigation before the VIRC itself is fully characterized. It is shown that mounting an absorber in a specific location on the hatch significantly improves the rejection rate of the chi-squared goodness-of-fit test for Rician distribution without increasing the $K$ -factor above $-$ 10 dB over the frequency range 755–2740 MHz in the VIRC under investigation. However, the proposed methodology has been devised to be universal to any reverberation chamber, and the obtained results can be used to improve EMC testing due to the better understanding of the unique VIRC environment.

18 July 2023 in Electronics
Verified
Journal Article
Open access
PDF file
HAHadi Alidoustaghdam
Hadi Alidoustaghdam
AKAndré Kokkeler
André Kokkeler
YMYang Miao
Yang Miao
Multibeam planar arrays are investigated as shared apertures for dual functionality in millimeter-wave (mmWave) joint communication and sensing (JCAS), providing time division duplex communication and full-duplex sensing with steerable beams. The conventional uniform planar arrays (CUPA)s have limited angular resolution, whereas the sparse planar arrays (SPA)s are often very costly to implement. In order to have a low-cost aperture with high angular resolution, we propose to design a sparse tiled planar array (STPA) shared aperture. Our proposed solution is modular tiling and uniform at the subarray level but sparse at the aperture level. The modular tiling and sparse design of a planar array are non-convex optimization problems; however, we exploit the fact that the more irregularity of the antenna array geometry, the less the side lobe level (SLL). In a JCAS scenario, we compare the performance of STPA, CUPA. and SPA, regarding the spectral efficiency of a line-of-sight (LoS) included communication link, detection loss rate, and detection accuracy rate for sensing, and the blockage time in case of an overlapping communication and sensing beam. The SPA for comparison has the same size and beamwidth as STPA, but less average SLL and less modular design. The results show that the same spectral efficiency is achieved in the communication link for CUPA, SPA, and STPA. The effect of a smaller beamwidth of the STPA and SPA is reflected in the lower detection loss rate of them compared to that of the CUPA, but the side lobes of these sparse solutions result in errors in the association of the detected and true targets and hence a reduction in the detection accuracy. In such a multibeam solution for JCAS, it is critical to study blockage time, and we show that the STPA and SPA have a 40% shorter blockage time compared to the CUPA when a blocker moves across the LoS of the communication link. Therefore, STPA is a trade-off solution between CUPA and SPA, since it has uniformly distributed antennas within the subarrays as in CUPA, but a sparse solution in the whole aperture as in SPA, which guarantees the same beamwidth and sensing performances as a SPA.

5 January 2021 in IEEE Transactions on Wireless Communications
Verified
Journal Article
Closed access
MMMHD Zaher Mahfouz
MHD Zaher Mahfouz
AKAndre B. J. Kokkeler
Andre B. J. Kokkeler
AMArjan Meijerink
Arjan Meijerink
AGAndrés Alayón Glazunov
Andrés Alayón Glazunov
We develop a systematic methodology to experimentally investigate the impact of interference from a non-listen-before-talk ultra-narrowband (UNB) signaling technique on Wi-Fi links. The methodology is based on a worst-case interference scenario, and consists of three investigating steps. This methodology is then applied to a measurement setup to practically study the case of 100 bps UNB signals interfering with an IEEE 802.11n transmission in the 2.4GHz band. Five different Wi-Fi devices are tested. The UNB signal is generated in two modulation schemes, the on-off-keying (OOK) and the Gaussian minimum-shift-keying. Both single and multiple simultaneous UNB interferers are considered. An analysis of the measurement results shows that three of the tested Wi-Fi devices cannot coexist with the considered non-listen-before-talk UNB communication system. The throughput performance analysis of the other tested devices shows that the OOK-modulated UNB signal has the least interfering impact, and the Wi-Fi pilot subcarriers are the most vulnerable to UNB interference. However, if a single UNB interferer avoids these subcarriers and employs the OOK-modulation scheme, then wireless coexistence is possible as long as the signal-to-interference ratio of Wi-Fi to UNB is greater than 30dB, given that a drop to 75% of the maximum Wi-Fi throughput is acceptable.