16 June 2025 in IEEE Transactions on Vehicular Technology
The existing autonomous driving systems present poor performance for heavy vehicles, and face challenges gaining acceptance from surrounding vehicles in the interactive scenarios due to the deficiency of sociality. Therefore, a socially game-theoretic decision-making method is proposed in this study. Firstly, the concept of asymmetric driving aggressiveness is introduced to construct the decision-making model, ensuring driving safety and sociality across different vehicle types. Secondly, a socialized lane-change model for autonomous heavy vehicles is proposed based on the asymmetric aggressiveness and game theory with incomplete information. Subsequently, the cooperativeness of the interactive vehicle is estimated to eliminate the uncertainty through the combination of trajectory prediction and driving environment assessment. Finally, two conventional decisionmaking models are used as benchmarks to validate the effectiveness and robustness of the proposed method using naturalistic driving data. The results demonstrate that the socially game-theoretic lane-change model can generate safe and socialized decisions by estimating the cooperativeness of interactive vehicle. Besides, the proposed method exhibits enhanced social-friendliness with minimal impact on other vehicles and excellent robustness in navigating dynamic and complex traffic environment. Despite a slight reduction in driving efficiency, it still demonstrates a better adaptability and compatibility for autonomous heavy vehicles because the depressed performances are not the primary concerns.
11 December 2024 in IEEE Transactions on Industrial Electronics
Integrating subsystem functions in vehicle chassis control can significantly enhance motion performance. However, the coupling characteristics of vehicle dynamics may cause conflicts among subfunctions. Increased control requirements also intensify controller tuning burden and make parameters highly dependent on driving conditions. To address these issues, this article proposes an automated recursive tuning based predictive safety control for electric vehicles. This strategy optimally allocates additional torques to enhance vehicle handling agility, driving stability, traction ability, and longitudinal-lateral motion coordination simultaneously. An unscented Kalman filter based automated recursive tuning system is employed to balance these control requirements automatically and offer real-time adaptability to varying conditions. Distinct real-world experiments are designed for closed-loop tuning and control. First, a tuning experiment involving sequential longitudinal and lateral motions allows tuned parameters to quickly adapt to varying driving conditions and integrate dynamic features. Then, extreme longitudinal and lateral experiments are conducted independently for predictive safety control. Compared with results with controller tuned manually, the proposed strategy enhances handling agility, lateral stability, and antiskidding in the lateral test by 12.16%, 15.16%, and 30.49%. In the longitudinal test, traction ability and accelerating capacity are improved by 51.24% and 9.4%. Besides, vehicle lateral and yaw fluctuations are notably reduced by 49.78% and 42.96%.
23 February 2024 in IEEE Transactions on Intelligent Vehicles
Precisely assessing driving threat of road segments could significantly enhance the driving efficiency of intelligent connected vehicles (ICV) within mixed traffic scenarios. Existing methods primarily concentrate on collision probabilities, resulting in an insufficient appraisal of asymmetrical hazard levels attributed to the various interactions. Meanwhile, the uncertainty and communication delay have great influence on ICV, and it is an issue that must be addressed when designing decision-making and planning model. Thus, this study proposes and formulates a new driving aggressiveness model after analyzing asymmetric interactions behaviors among vehicles with different types. Subsequently, aims to verify the capability of generating asymmetric interaction, the driving aggressiveness model is applied on lane-change decision-making and planning. Concretely, the aggressiveness-sensitive lanes-selection model is designed based on game theory, and the uncertainty-aware trajectory planning is developed by utilizing stochastic model predictive control (MPC) and the asymmetric driving aggressiveness. Finally, two naturalistic driving scenarios are utilized to verify the performance of the decision-making and planning model. The outcomes of simulations illustrate that the driving aggressiveness model introduces a novel perspective to assess the asymmetric driving threat. Meanwhile, the uncertainty-aware decision making and planning model can reduce the influence on interactive vehicles, and it has superior adaptability for dynamic and connected traffic environments.
3 February 2026 in IEEE Transactions on Instrumentation and Measurement
Accurate vehicle velocity estimation is critical for advanced driver assistance systems (ADAS) and autonomous driving, yet faces significant challenges due to unknown road friction and tire saturation effects. To address these issues, this paper proposes a transient-aware fusion observer that incorporates the real-time tire-road friction conditions to achieve robust velocity estimation. Longitudinal and lateral tire forces are estimated by dedicated observers. These forces are used to infer the tire-road friction coefficient (TRFC), which serves as input to a LuGre tire model to capture transient friction dynamics. A nonlinear observer then fuses kinematic velocity predictions with model-based corrections, using acceleration mismatches and friction-coefficient errors as feedback to refine the estimates. By integrating the friction state into dynamic corrections, the observer maintains accuracy even during tire saturation, ensuring reliable state estimates. The asymptotic convergence of the observer is rigorously proven using Lyapunov stability theory. The performance of the proposed observer is examined through field test scenarios under varying adhesion roads. The results demonstrate that the proposed observer exhibits higher estimation accuracy compared with benchmark methods.