18 January 2024 in IEEE Transactions on Intelligent Transportation Systems
Regenerative braking energy (RBE) utilization plays a vital role in improving the energy efficiency of electrified railways. To date, various power flow control-based solutions have been developed to recycle the RBE for utilization within railway power systems (RPSs). In this paper, an overview of the state-of-the-art power flow control-based solutions for RBE utilization in AC electrified railways is presented. It provides a technical analysis of four primary power flow control-based solutions for RBE utilization, including power sharing-based, energy feedback-based, energy storage-based, and composite solutions. The critical architectures of power flow conditioners for each solution are analyzed in depth. Meanwhile, the power flow control strategies for these solutions are reviewed from the perspectives of power flow management and converter control. From the industrial point of view, the critical challenges associated with fault protection, economy, and environmental impact are discussed. In addition, future trends are comprehensively elaborated from internal and extended improvements. This comprehensive review provides an insightful understanding of the technology readiness, constraints, and perspectives regarding the power flow control-based RBE utilization in electrified railways, contributing to bridging the gaps between academic research and industry implementation.
26 May 2022 in IEEE Transactions on Sustainable Energy
This paper proposes a combined active and reactive power flow control strategy for the flexible traction substation (FTSS). It fully uses the active and reactive power flexibility of FTSS to maximize regenerative braking energy (RBE) and photovoltaic (PV) energy utilization and improve power quality comprehensively. First, the active power flow optimization layer coordinates the active power outputs of the back-to-back converter (BTBC) and energy storage system to maximize the utilization of the available RBE and PV energy and balance the active power outputs of the traction transformer. Meanwhile, it controls PV output to limit the surplus energy injected into the utility grid further. Then, the model predictive control (MPC)-based reactive power flow optimization layer employs the spare capacity of BTBC to optimize the reactive power flow to improve the multiple power quality issues further, including negative sequence current (NSC), effective power factor (EPF), and traction network voltage fluctuations. To establish the MPC optimization problem, the NSC, EPF, and traction network incoming voltage sensitivity matrices with respect to the reactive power outputs of the traction transformer are first derived. Finally, the hardware-in-the-loop experiments, based on the data measurement from a high-speed railway traction substation, verify the effectiveness of the proposed strategy.
3 June 2021 in IEEE Transactions on Industrial Electronics
The railway power conditioner-based energy storage system (RPC-based ESS) is a promising technology to improve the regenerative braking energy (RBE) utilization and power quality of ac direct-fed (25 kV) and AT-fed (2 × 25 kV) railway power systems. However, despite its benefits from the technical perspective, economic viability must be concerned in industrial applications. The capacity is one of the critical issues affecting ESS performance in technical and economic aspects. Therefore, this paper presents a comprehensive approach to designing the capacity for the RPC-based ESS by considering multiple objectives, including the RBE utilization rate, power quality standard, and net lifetime benefit. The proposed approach develops a technical-economic model for the RPC-based ESS based on variables such as the system capacity for RBE utilization and power quality improvement, lifetime cost, and electric charge-based benefits. Moreover, the master-slave control strategy is employed to control the RPC-based ESS to implement the capacity design objectives. Finally, the correctness and effectiveness of the proposed method are validated by sufficient tests based on field load data of a Chinese traction substation.
1 February 2022 in IEEE Transactions on Industrial Electronics
This article proposes an integrated regenerative braking energy utilization system (RBEUS) to improve regenerative braking energy (RBE) utilization in electrified railways. The proposed RBEUS uses a traction substation energy storage system and two sectioning post converters to achieve coordinated RBE utilization in three consecutive traction substations via power-sharing and storage, and the power quality can also be improved. A hierarchically coordinated control strategy is developed based on the operation principle to provide real-time power management and control for the RBEUS. In the system layer, a centralized power management strategy is designed for operation mode management and active power command generation. It uses a sequential quadratic programming-based algorithm to solve the objective function to achieve optimal RBE utilization under different operation modes. In the converter layer, local controllers of the RBEUS enable converters to respond to the active power commands from the system layer and reactive power commands generated by themself for power flow control. The effectiveness of the proposed RBEUS is comprehensively verified by using a hardware-in-the-loop experiment. Besides, a comparison analysis of the proposed RBEUS and literature methods is conducted to testify the superiority of the RBEUS. The feasibility of RBEUS implementation is also discussed from fault protection and economy.
10 January 2025 in IEEE Transactions on Transportation Electrification
The traditional model-based energy management strategy (EMS) for regenerative braking energy storage systems (RBESS) is obsoleting in the face of increasingly complex and un-certain operation conditions in railway power system (RPS). In this paper, a model-free deep reinforcement learning (DRL) method is proposed. First, the multi-objective energy manage-ment problem for RBESS is formulated to concurrently achieve the RBE utilization and power demand shaving of RPS. Then, this problem is modeled as a Markov decision process (MDP) to be solved by the DRL-based method. Specifically, the RBESS con-troller is modeled as an agent to interact with the environment modeled as the RPS integrated with RBESS. To coordinate the agent to learn the optimal strategies regarding multiple energy management objectives in different time scales, a multistage reward function involving the step reward and final reward is de-signed. Based on the above elements, the double deep Q-learning algorithm is applied to train the agent for optimizing the EMS. Finally, the proposed DRL-based EMS is tested on the OPAL-RT experimental platform by using the field load data. Case studies have demonstrated that the proposed method outperforms the traditional rule-based and optimization-based methods by over 5% in the energy management objective.
2 January 2023 in IEEE Transactions on Sustainable Energy
The particular split-phase traction power system of AC electrified railways (ERs) restricts its regenerative braking energy (RBE) utilization and photovoltaic (PV) penetration. Networked flexible traction substation (FTSS) operation is a promising paradigm to address this restriction. Therefore, this paper proposes a networked FTSS system architecture that ties adjacent FTSSs via unified power flow controllers (UPFC) at sectioning posts (SPs), which matches the technical characteristics of split-phase ERs obtaining the lower capacity requirement. Correspondingly, a real-time hierarchical energy management strategy is designed. The networked FTSS management level optimizes the energy cooperation among FTSSs, i.e., the exchange power at SPs. It aims at maximizing the global RBE and PV energy utilization and shaving the maximum demand of each FTSS. At the individual FTSS management level, each FTSS autonomously regulates the power outputs of the local back-to-back converter and energy storage system to maximize the local RBE and PV energy utilization and improve the local power quality issues. These two energy management levels operate independently with different time scales, making the networked FTSS system have good extensibility and reliability. Finally, the performance of the proposed scheme is verified via hardware-in-the-loop tests.