Sergio Ruiz de Galarreta

Sergio Ruiz de Galarreta

Auto-generated profile, based on publicly available information

Sergio Ruiz de Galarreta

Department of Mechanical Engineering and Materials, Universidad de Navarra, TECNUN Escuela de Ingenieros, Paseo Manuel de Lardizabal, 13, 20018, San Sebastian, Spain

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2021 in Journal of the Mechanical Behavior of Biomedical Materials
Verified
Journal Article
Open access
RAReduan Asbai-Ghoudan
Reduan Asbai-Ghoudan
SGSergio Ruiz de Galarreta
Sergio Ruiz de Galarreta
NRNaiara Rodriguez-Florez
Naiara Rodriguez-Florez
Triply periodic minimal surfaces (TPMS) are mathematically defined cellular structures whose geometry can be quickly adapted to target desired mechanical response (structural and fluid). This has made them desirable for a wide range of bioengineering applications; especially as bioinspired materials for bone replacement. The main objective of this study was to develop a novel analytical framework which would enable calculating permeability of TPMS structures based on the desired architecture, pore size and porosity. To achieve this, computer-aided designs of three TPMS structures (Fisher-Koch S, Gyroid and Schwarz P) were generated with varying cell size and porosity levels. Computational Fluid Dynamics (CFD) was used to calculate permeability for all models under laminar flow conditions. Permeability values were then used to fit an analytical model dependent on geometry parameters only. Results showed that permeability of the three architectures increased with porosity at different rates, highlighting the importance of pore distribution and architecture. The computed values of permeability fitted well with the suggested analytical model (R2>0.99, p<0.001). In conclusion, the novel analytical framework presented in the current study enables predicting permeability values of TPMS structures based on geometrical parameters within a difference <5%. This model, which could be combined with existing structural analytical models, could open new possibilities for the smart optimisation of TPMS structures for biomedical applications where structural and fluid flow properties need to be optimised.

1 April 2020 in Materials & Design
Verified
Journal Article
Open access
SGSergio Ruiz de Galarreta
Sergio Ruiz de Galarreta
JJJonathan R.T. Jeffers
Jonathan R.T. Jeffers
SGShaaz Ghouse
Shaaz Ghouse

1 October 2019 in Journal of the Mechanical Behavior of Biomedical Materials
Verified
Journal Article
Closed access
MAMarkel Alaña
Markel Alaña
ALAitziber Lopez-Arancibia
Aitziber Lopez-Arancibia
APAinara Pradera-Mallabiabarrena
Ainara Pradera-Mallabiabarrena
SGSergio Ruiz de Galarreta
Sergio Ruiz de Galarreta

15 August 2023 in Computers in Biology and Medicine
Verified
Journal Article
Open access
RAReduan Asbai-Ghoudan
Reduan Asbai-Ghoudan
GNGabriele Nasello
Gabriele Nasello
MAMaria Angeles Perez Anson
Maria Angeles Perez Anson
Stefaan VerbruggenStefaan Verbruggen
Stefaan Verbruggen
SGSergio Ruiz de Galarreta
Sergio Ruiz de Galarreta
NRNaiara Rodriguez-Florez
Naiara Rodriguez-Florez
Mechanical environment plays a crucial role in regulating bone regeneration in bone defects. Assessing the mechanobiological behavior of patient-specific orthopedic scaffolds in-silico could help guide optimal scaffold designs, as well as intra- and post-operative strategies to enhance bone regeneration and improve implant longevity. Additively manufactured porous scaffolds, and specifically triply periodic minimal surfaces (TPMS), have shown promising structural properties to act as bone substitutes, yet their ability to induce mechanobiologially-driven bone regeneration has not been elucidated. The aim of this study is to i) explore the bone regeneration potential of TPMS scaffolds made of different stiffness biocompatible materials, to ii) analyze the influence of pre-seeding the scaffolds and increasing the post-operative resting period, and to iii) assess the influence of patient-specific parameters, such as age and mechanosensitivity, on outcomes. To perform this study, an in silico model of a goat tibia is used. The bone ingrowth within the scaffold pores was simulated with a mechano-driven model of bone regeneration. Results showed that the scaffold's architectural properties affect cellular diffusion and strain distribution, resulting in variations in the regenerated bone volume and distribution. The softer material improved the bone ingrowth. An initial resting period improved the bone ingrowth but not enough to reach the scaffold's core. However, this was achieved with the implantation of a pre-seeded scaffold. Physiological parameters like age and health of the patient also influence the bone regeneration outcome, though to a lesser extent than the scaffold design. This analysis demonstrates the importance of the scaffold's geometry and its material, and highlights the potential of using mechanobiological patient-specific models in the design process for bone substitutes.

3 August 2022 in Computers in Biology and Medicine
Verified
Journal Article
Open access
MAMarkel Alaña
Markel Alaña
ALAitziber Lopez-Arancibia
Aitziber Lopez-Arancibia
SGShaaz Ghouse
Shaaz Ghouse
NRNaiara Rodriguez-Florez
Naiara Rodriguez-Florez
SGSergio Ruiz de Galarreta
Sergio Ruiz de Galarreta
Additively manufactured lattice structures enable the design of tissue scaffolds with tailored mechanical properties, which can be implemented in porous biomaterials. The adaptation of bone to physiological loads results in anisotropic bone tissue properties which are optimized for site-specific loads; therefore, some bone sites are stiffer and stronger along the principal load direction compared to other orientations. In this work, a semi-analytical model was developed for the design of transversely isotropic lattice structures that can mimic the anisotropy characteristics of different types of bone tissue. Several design possibilities were explored, and a particular unit cell, which was best suited for additive manufacturing was further analyzed. The design of the unit cell was parameterized and in-silico analysis was performed via Finite Element Analysis. The structures were manufactured additively in metal and tested under compressive loads in different orientations. Finite element analysis showed good correlation with the semi-analytical model, especially for elastic constants with low relative densities. The anisotropy measured experimentally showed a variable accuracy, highlighting the deviations from designs to additively manufactured parts. Overall, the proposed model enables to exploit the anisotropy of lattice structures to design lighter scaffolds with higher porosity and increased permeability by aligning the scaffold with the principal direction of the load.

29 September 2023 in npj Regenerative Medicine
Verified
Journal Article
Open access
PDF file
JRJuan Antonio Romero-Torrecilla
Juan Antonio Romero-Torrecilla
JLJosé María Lamo-Espinosa
José María Lamo-Espinosa
PRPurificación Ripalda-Cemboráin
Purificación Ripalda-Cemboráin
TLTania López-Martínez
Tania López-Martínez
GAGloria Abizanda
Gloria Abizanda
FGFroilán Granero-Moltó
Froilán Granero-Moltó
During bone regeneration, the periosteum acts as a carrier for key regenerative cues, delivering osteochondroprogenitor cells and crucial growth factors to the injured bone. We developed a biocompatible, 3D polycaprolactone (PCL) melt electro-written membrane to act as a mimetic periosteum. Poly (ethyl acrylate) coating of the PCL membrane allowed functionalization, mediated by fibronectin and low dose recombinant human BMP-2 (rhBMP-2) (10-25 μg/ml), resulting in efficient, sustained osteoinduction in vitro. In vivo, rhBMP-2 functionalized mimetic periosteum demonstrated regenerative potential in the treatment of rat critical-size femoral defects with highly efficient healing and functional recovery (80%-93%). Mimetic periosteum has also proven to be efficient for cell delivery, as observed through the migration of transplanted periosteum-derived mesenchymal cells to the bone defect and their survival. Ultimately, mimetic periosteum demonstrated its ability to deliver key stem cells and morphogens to an injured site, exposing a therapeutic and translational potential in vivo when combined with unprecedentedly low rhBMP-2 doses.