1 January 2026 in Journal of Mining and Metallurgy, Section B: Metallurgy
To further address the practical issues of enhancing steelmaking efficiency, improving the slag melting rate, and reducing molten steel splashing in Chinese steel enterprises, this study proposed a six-hole dual-Mach-number oxygen lance (DMNOL) nozzle and investigated the effect of the dual-Mach-number design on the jet characteristics of the oxygen lance through numerical simulation. The results show that, compared with the original enterprise nozzle (Ma = 2.0), the coalescence distance of the DMNOL jet was significantly increased, effectively delaying jet velocity decay. The optimal dual-Mach-number nozzle was the one with Ma = 2.0 and 2.05. Compared with the original enterprise nozzle, the optimal dual-Mach-number nozzle exhibited an 11.06% increase in the supersonic region length of the jet and a 36.22% extension in the jet coalescence distance. At the optimal steelmaking lance height of 1.2 m, the optimal nozzle achieved a 9.26% increase in the effective impact area and an approximately 3.23% decrease in impact depth, improving steelmaking efficiency while reducing molten steel splashing. At the optimal slag melting lance height of 1.8 m, the optimal nozzle achieved a 33.33% increase in the slag melting impact area and a 3.69% increase in impact depth, enhancing the slag melting rate while promoting bath stirring.
21 May 2026 in Metallurgical Research & Technology
In the process of top-blown converter steelmaking, the jet characteristics of the oxygen lance nozzle have a direct impact on the slag melting rate within the molten pool and the stirring effect of the molten steel, which influence steelmaking efficiency and product quality. In this research, a five-hole oxygen lance nozzle model suitable for 100-ton converters was established. Through numerical simulation, the effect of oxygen preheating temperature (300–900 K) on velocity decay, impact characteristics, and stirring performance of the five-hole oxygen lance jet under high-temperature conditions (1873 K) was analyzed. Results indicate that at high temperatures, increasing the oxygen preheating temperature significantly extends the length of the high-velocity jet region (jet velocity ≥500 m/s). However, this intensifies jet deflection and velocity decay, while also substantially shortening the length of the supersonic region. The optimal operating gun positions are 2.9 m for slag treatment and 2.5 m for conventional melting operations, corresponding to oxygen preheating temperatures of 800 and 600 K, respectively. Compared to the preheating temperature of 300 K, the 800 K oxygen jet increases the slag treatment area by 62.23% and reduces molten steel splashing by 76.44%. At a preheat temperature of 600 K, the effective impact area of the oxygen jet increases by 5.38%, the molten steel splatter rate decreases by 77.09%, and the mixing time increases by 68.18%. Notably, selecting an appropriate preheating temperature can effectively reduce splatter and enhance slag melting rate while also slightly improving smelting efficiency. Although mixing time significantly increases during this process, it can be shortened by adjusting the torch position and oxygen flow rate.