14 December 2020 in Journal of Lightwave Technology
A novel ultra-long distributed vibration sensor using forward transmission, coherent detection, and a frequency-shifted optical delay line is proposed and experimentally demonstrated. In the proposed scheme, a pair of multi-span optical fibers is deployed for sensing. A frequency-shifted optical delay line consisting of an acoustic-optic modulator and a time delay fiber is used at the far end of these two fibers. Coherent detection is used to retrieve the vibration induced phase fluctuations of the base-band signals as well as the intermediate frequency signals generated by the frequency-shifted optical delay line. Two differential phase signals can be calculated from the obtained phase fluctuations, which can then be used to localize the vibration events by correlation operations. Localization of a few hundred Hz, around 1 kHz and tens of kHz vibrations has been experimentally demonstrated over a total length of 1230 km sensing fiber. Less than 125 m spatial resolution can be obtained over the 615 km sensing range for vibrations with larger than 1 kHz frequency by using averaging of 30 times tests due to the nature of asynchronous operation. Frequencies from infrasound to ultrasound can be detected. The proposed scheme has advantages of ultrabroad frequency response, ultra-long sensing range and simple sensing structure due to the nature of forward transmission and coherent detection. The sensing length can be further extended to even trans-oceanic distances using more fiber spans and erbium-doped fiber amplifiers, making it a promising candidate for vibration event detection and localization in long-haul and ultra-long-haul fiber links.
8 February 2021 in Journal of Lightwave Technology
The development of optical fiber technology has facilitated the technological innovation in optical fiber communication and sensing systems over the past decades. Among all the fiber sensing technologies, distributed optical fiber sensing (DOFS) has attracted great research interests and has been extensively investigated. In optical fiber communication systems, optical parameters such as intensity, phase, polarization, or frequency are modulated to realize data transmission, while for DOFS they are employed to measure the distributed physical parameter variation along the sensing fiber. Due to the similarities shared by optical fiber communication systems and DOFS systems, optical communication techniques, including coherent detection, polarization diversity and multicarrier signaling have been widely used in the DOFS to improve the sensing performance. In this article, principles of coherent detection, polarization diversity and multicarrier signaling are introduced and their applications in phase sensitive optical time domain reflectometry and Brillouin optical time domain analyzer are reviewed. A newly proposed unidirectional forward transmission based DOFS is also presented.
15 August 2023 in Journal of Lightwave Technology
In the article, a novel reflective all-fiber integrated sensor for simultaneous gas pressure and temperature sensing has been proposed and demonstrated in experiment. The proposed sensor is fabricated by combining seven core fibers (SCFs), a twin-hole and dual-core fiber (THDCF), a single-mode fiber (SMF) extrinsic Fabry-Perot interferometer (FPI) and a fiber Bragg grating (FBG). The FPI section and FBG section act as a pressure and temperature sensing unit. Especially, the MZI has the effect of filtering the FPI spectrum and is more conducive to the demodulation of the FPI reflected signal. In FPI section, the two SMFs connects with a hollow core capillary (HCC) by the ultraviolet (UV) curing glue. The sensor exhibits a high pressure and temperature sensitivity of 13.10 nm/MPa and 0.20 nm/°C in the range of 0.1-1.2 MPa and 30-90 °C, respectively. The FBG works as a temperature sensor without pressure responding, is fabricated by using the UV laser-based phase mask technology in our lab. By utilizing the dual-wavelength matrix method, both gas pressure and temperature can be measured simultaneously. In sum, with the advantage of compact size, easy fabricated, low cost, high sensitivity, reflection-type and the ability of multi-parameter measurement, our sensor is more competitive in harsh environments.
8 October 2021 in Journal of Lightwave Technology
In this paper, we propose and experimentally demonstrate a scheme of deep learning enhanced long-range fast Brillouin optical time-domain analysis (BOTDA). The volumetric data from fast BOTDA is denoised and demodulated by using a deep video denoising network and a deep neural network, respectively. Benefitting from the advanced deep learning algorithms, the sensing range of fast BOTDA is extended to 10 km successfully. In experiment, vibration signal is measured with a sampling rate of 23 Hz, 2 m spatial resolution, and 1.19 MHz accuracy over 10 km single-mode fiber with only 4 averages. Due to the low computational complexity and GPU acceleration, the network takes less than 0.04 s to process 100 × 21800 data, which is much faster than the conventional algorithms. This method provides the potential for real-time vibration measurement in fast BOTDA with long sensing range.
6 March 2024 in Journal of Lightwave Technology
This study presents a novel approach for extracting perturbations in phase-sensitive optical time domain reflectometry (Φ-OTDR) under challenging ultra-low signal-to-noise ratio (SNR) conditions. To effectively enhance the SNR of Φ-OTDR signals, a block-matching and 3-D (BM3D) based denoising scheme was proposed. 1-D Φ-OTDR traces are converted to 2-D images that encapsulate both temporal and spatial information, enabling the utilization of the data correlation in both domains through BM3D to reduce the signal noise. This approach effectively preserves intricate details of Rayleigh signals while mitigating the impact of noise. Moreover, an adaptive parameter selection method tailored to the characteristics of reflected backscattered signals is developed to facilitate a more convenient and robust implementation of the denoising algorithm. Experimental validation is accomplished by performing distributed vibration sensing over an 80 km optical fiber with a spatial resolution of 10 m. Results show a substantial enhancement in SNR from 1.77 dB to 40.6 dB at the end of the test fiber. We firmly believe that the proposed approach holds significant potential for widespread application in long-distance distributed sensing scenarios operating under low SNR conditions.
23 April 2024 in IEEE Sensors Journal
Forward-transmission fiber-optic distributed vibration sensors have potential use in long-distance sensing and integration with optical communication networks. However, the ability to localize disturbance events with low-frequency is fairly inferior to high-frequency events, which hinders the broader application of such distributed vibration sensors. To address this problem, we propose a Phase Differentiation Endpoint Amplification (PDEA) method to optimize the sensor’s frequency response for event localization. By differentiating the original extracted phase signal, the proposed method amplifies the amplitude of the endpoints of the disturbance event. Via cross-correlation, the endpoint amplitude amplification reduces the localization errors. Experimental results demonstrate that the forward transmission sensing system using the proposed method maintains a localization accuracy within ±51 m across frequencies from 300 Hz to 10 kHz over a 122 km range. Additionally, the system’s localization capability for low-frequency disturbances occurring at the near-end is notably enhanced. The PDEA algorithm significantly improves the wide-frequency response of forward-transmission fiber-optic distributed vibration sensors. The enhanced localization ability will be beneficial when the sensors are applied in scenarios such as integrated optical sensing and communication (IOSAC).