As a mature power semiconductor, the thyristor is widely used in high-power electrical systems. However, its performance and type selection are still worth discussing in some unconventional applications. In this article, the dynamic voltage balancing the performance of series connected thyristors in an auxiliary oscillation zero-crossing circuit designed for a 10 kV/100 kA Quench Protection System (QPS) is discussed. This pulse power circuit contains a bidirectional switch composed of four thyristor stacks, which are used to inject reverse current into the parallel vacuum circuit breaker (VCB) to interrupt the dc circuit. It is proven by both analysis and experiment results that although there is a high di/dt conduction requirement, the ordinary power thyristors are proof that it is more suitable than pulse power thyristors on this occasion for their better transient reverse recovery voltage balancing performance. The phenomenon is explanted by physical principles and measurement results.
19 January 2024 in IEEE Transactions on Plasma Science
The switching network unit (SNU) is an important and indispensable system in nuclear fusion experiments. Its main switching components determine the response speed, reliability, working life and other performance of the system. According to the design requirements, the preliminary design of key switching components was conducted. First, several SNU topologies were compared and analyzed to determine a promising scheme. Then, the main switching components in the scheme were designed and analyzed. Finally, the system cost budget and preliminary analysis of the spatial layout were carried out. This article proposed and analyzed the feasible topologies of the current SNU and preliminarily designed the key switching components in detail. The above research provides a certain basis and reference for the design of high-parameter SNU of fusion devices in the future.
18 April 2023 in IEEE Transactions on Plasma Science
Switching network unit (SNU) of fusion device excites the plasma and finally establishes the plasma current. The full-controlled hybrid scheme is the research trend and hotspot of SNU in a nuclear fusion device. Based on the analysis of the SNU schemes in the current fusion devices, two kinds of full-controlled hybrid circuits are compared and analyzed. Through the principle analysis, theoretical calculation, and model simulation under 50 kA, the system operation process and the influence of arc voltage and other related parameters on the operation process are studied and discussed. Finally, the main characteristics and applicable conditions of the two circuits are described. At the same time, the aspects needing attention in circuit design are explained. The research shows that the basic circuit is suitable for high-current circuits, and the multistage commutation circuit is suitable for high-voltage circuits. The above study can provide a useful reference for the design of full-controlled hybrid SNU.
20 July 2025 in International Journal of Circuit Theory and Applications