The use of virtual teaching aids with AR technology in various areas of education, including physics, has been studied. The similarity between physical and electrical models has been established, and the development of a mobile app for studying simple electric circuits has been validated. The feasibility of developing the technique of augmented reality mobile apps has been established. The following milestones have been identified in the development of the augmented reality app: production of electronic models, installation of the game engine Unity3D, development of all program scenes, operation testing, and demonstration. The application of scenarios for electronic models rotation and movement has received special attention. In-house created augmented reality mobile app for mobile devices "Augmented reality program for studying the simplest electric circuit" has been offered. The developed mobile app reads, recognizes, and displays the product electronic model on the screen. It has been demonstrated that the augmented reality application produced by the author team as mobile teaching software can be used to complete assignments for students' individual work as well as classroom studies at colleges.
In modern conditions, the transition to distance learning has set new tasks for teachers, in particular, related to laboratory work. In these works, students not only study the structure and features of special equipment, but also acquire practical skills in working with the tool. The purpose of the article is to present our own experience of developing and using in the educational process a mobile application for teaching micrometer measurements during the relevant remote laboratory work in the disciplines ``Interchangeability, Standardization and Technical Measurements'' and ``Physics''. The literature analysis showed that ICT is widely used in the educational process in higher education, but computer programs and mobile applications are usually developed for secondary school disciplines, so there was a need to develop an information program for teaching students in distance learning, in particular during laboratory work. In order to teach students to work with a micrometer during distance learning, we have developed a mobile application. The process of developing the application included modeling the micrometer in the CAD system, creating training scenes in the Unity game engine and writing scripts to fully immerse students in the learning process. The mobile application developed by us consists of three parts: theoretical, educational and practical. In the theoretical part, students learn the structure and principles of working with a micrometer. The training part is developed in the form of a video lesson of working with the equipment. The practical part contains an electronic model of the micrometer and allows you to make measurements. Thus, during distance learning using the developed application, the percentage of qualitative success of students in laboratory work on the topic ``Measuring parts with a micrometer'' increased by 7.3\% compared to the same period of distance learning without the use of this application.
28 October 2020 in Information Technologies and Learning Tools
Автори актуалізують проблему реалізації мобільного навчання студентів у межах упровадження концепції ресурсно-орієнтованого навчання у вищій школі. На основі аналізу досліджень зроблено висновок про те, що мобільне навчання тлумачиться як форма ресурсно орієнтованого навчання і розглядається як система організаційних і дидактичних заходів, які базуються на використанні мобільних інформаційно-комунікаційних технологій та мобільних педагогічних програмних засобів. Зазначається, що одним із напрямів реалізації концепції ресурсно орієнтованого навчання у вищій школі є розробка таких мобільних педагогічних програмних засобів, які уможливлять підвищити якість професійної підготовки фахівців, зокрема, технічних спеціальностей. Проведений аналіз засобів навчання, що використовуються під час вивчення загальнотехнічних дисциплін, дав можливість провести аналогію між фізичними і електронними моделями та обґрунтувати розробку програмного забезпечення для розвитку просторового мислення студентів технічних спеціальностей. Подано методику створення мобільних додатків для доповненої реальності, висвітлено основні етапи розробки додатку доповненої реальності, починаючи від встановлення ігрового рушія до його тестування та демонстрації роботи. Особливу увагу приділено написанню та обґрунтуванню кожного рядка сценаріїв (scripts). Презентовано власну розробку мобільного додатку для мобільних пристроїв «Програма доповненої реальності», яка реалізує доповнену реальність. Створений мобільний додаток зчитує, розпізнає маркер кресленика та відображає на екрані мобільного пристрою електронну модель виробу. З’ясовано, що розроблена авторським колективом програма доповненої реальності як мобільний педагогічний програмний засіб може бути використана для підтримки як самостійної роботи студентів, так і при організації аудиторних занять у закладах вищої освіти.
18 October 2024 in B U L L E T I N OF OLEKSANDR DOVZHENKO HLUKHIV NATIONAL PEDAGOGICAL UNIVERSITY
У статті проаналізовано педагогічні суперечності освітнього процесу закладів вищої освіти, зокрема аграрного профілю. Розкрито питання моделювання структури та змісту самостійної роботи здобувачів вищої освіти впроцесі вивчення фізико-математичних дисциплін, зокрема вищої математики та фізики. Висвітлено етапи побудови логіко-семантичної моделі структури та змісту самостійної роботи здобувачів освіти вищих аграрних навчальних закладів під часвикладаннявищої математики і фізики. Розкрито основні дидактичні цілі самостійної роботи здобувачів вищої освіти в процесі вивчення фізико-математичних дисциплін. Запропоновано рекомендації щодо планування послідовності самостійного вивчення змістових блоків навчальних дисциплін «Вища математика»і «Фізика».
The article analyzes the process of natural restoration of the main component of the soil – humus, as a result of which the dependence of the thickness of the humus layer on the number of plants embedded in the soil was revealed. The technological process of surface tillage requires constant monitoring of the completeness of plant burying. The article analyzes the literature, which showed that machine vision systems are widely used in agriculture, for example, when detecting weeds for spot treatment with herbicides, analyzing citrus forms and diseases, automated counting of roundworms of cut trees, etc. A machine vision system is proposed as a control tool for detecting weeds on the soil surface. The authors proposed their own approach to control the completeness of burying pruned weeds in the soil using machine vision systems. The work of our own program for detecting weeds on the soil surface is described in detail and step by step. The program’s operability was checked on some plant models and its effectiveness of reliable operation was confirmed. Experimental studies were conducted in the laboratory. Based on the results of research in the computer program developed by the authors, the following results were obtained: photos of the soil surface were analyzed; contours of plant models were identified; plant areas and their percentage in relation to the image area were determined, and a message was received on the screen about the presence of weeds on the surface in accordance with agrotechnical standards.
1 January 2025 in Cherkasy University Bulletin: Pedagogical Sciences
The solution to the problem of training future engineers in the ability to find effective ways to solve problems, critically analyze the knowledge gained and apply it to solve complex technical tasks is based on the use of modern achievements of pedagogical science. A special role in this is played by a personality-oriented approach when studying physical, mathematical and general technical disciplines with using information technologies. The purpose of the article is to develop and substantiate a model of the process of organizing the educational activities of future engineers during the study of physical, mathematical and general technical disciplines using personality-oriented information technology for learning. Methods. Pedagogical observation, conversations, interviews, questionnaires. Results. The conceptual features and main components of the model of personality-oriented information technology for teaching physics, mathematics and general technical disciplines are presented. The main principles and criteria for selecting the content of physical, mathematical and general technical disciplines for the proposed model are presented. Originality. An explanation of the purpose of each component of the model is provided and the factors that influence them are outlined. The algorithm for implementing this model is described. Conclusion. The use of the proposed model of personality-oriented information technology for teaching physics, mathematics and general engineering disciplines will contribute to the effective achievement of the corresponding programmed learning outcomes and will provide the opportunity for future engineers to choose the optimal educational trajectory.