The sustainable valorization of lignin into high-value aromatic chemicals remains restricted by the extreme recalcitrance of C–C linkages and the lack of highly selective, eco-friendly catalytic systems. Herein, we report an energy-efficient electrocatalytic protocol driven by a noble-metal-free, multicomponent metal sulfide heterostructure. Operating under ambient conditions with universally dissolved O2 as the sole green oxidant, this multi-metallic catalyst achieves unprecedented depolymerization of authentic hardwood lignin (aromatic monomer yields > 10%) and near-quantitative conversion (99%) for robust dimeric model compounds. Comprehensive microscopic and spectroscopic investigations reveal that, rather than forming a conventional single-phase solid solution, the constituent metal sulfides assemble into highly interwoven nanodomains. This unique hierarchical heterostructure creates abundant heterogeneous interfaces that induce strong electronic coupling and orbital hybridization. Crucially, this interfacial synergy thermodynamically drives the spontaneous formation of high-density sulfur vacancies (Vs), which serve as exclusive active centers to specifically activate O2 into long-lived superoxide radicals (·O2−). This targeted radical pathway triggers the specific β-scission of C–C bonds and subsequent oxidative decarbonylation, fundamentally averting non-selective over-oxidation. Characterized by a remarkably low specific energy consumption (2.32 kWh mol−1), this work presents a generalized paradigm for designing defect-rich hetero-nanostructures to overcome formidable thermodynamic barriers in sustainable organic electrosynthesis.
This study reports the in-situ preparation of two nitrogen-doped carbon nanotube/porous carbon composites with distinct morphologies (NBPC-NCNTs-Fe and NPCS-NCNTs-Ni) for zinc-ion hybrid capacitors. Melamine is used as the carbon and nitrogen source, and the composites are synthesized by copolymerizing and carbonizing polymer precursors containing transition metal salts (ferric chloride or nickel chloride). NBPC-NCNTs-Fe features a block-like porous carbon center with short and sparse carbon nanotubes, while NPCS-NCNTs-Ni exhibits a spherical porous carbon center with in-situ grown long and dense carbon nanotubes. Electrochemical tests reveal that at a current density of 1 A g-1, NBPC-NCNTs-Fe and NPCS-NCNTs-Ni deliver specific capacities of 50.2 mAh g-1 and 57.8 mAh g-1, respectively, with energy densities approaching those of lithium-ion batteries and power densities comparable to supercapacitors. After 5000 cycles at a high current density of 5 A g-1, both composites retain high capacity retention rates of 91.6% and 94.9%, respectively, with nearly 100% coulombic efficiency. Notably, NPCS-NCNTs-Ni exhibits superior charge transfer performance due to its higher nitrogen content and porosity. This study provides insights into the preparation of high-performance composite carbon nanostructured materials for applications in zinc-ion capacitors and beyond.
The selective separation of metal poisons from highly acidic and corrosive industrial fluids remains a grand engineering challenge for mitigating the deactivation of precious metal catalysts in the methanol carbonylation process. Conventional polymer resins used for impurity removal suffer from severe degradation under such harsh conditions. Herein, we propose a sustainable "waste-to-wealth" engineering strategy to convert discarded cation-exchange resins (15WET) into robust sulfonated carbon adsorbents (RSC-400) via a one-step, magnesium-assisted in-situ retention method. By eliminating the need for hazardous external sulfonating agents, introducing Mg²⁺ as a chemical anchor forms thermodynamically stable contact ion pairs (CIP) with the inherent sulfonic (-SO₃H) groups of the resin. This coordination significantly increases the thermal cleavage activation energy of C-S bonds, successfully preserving the active sulfonic sites during carbonization at 400 °C. Consequently, the synthesized RSC-400 achieves a high sulfonic acid density of 2.59 mmol/g, in sharp contrast to the 0.03 mmol/g obtained without Mg protection. When applied to the actual high-pressure synthesis fluid of a methanol carbonylation plant, RSC-400 exhibits exceptional selective scavenging toward target metal poisons, achieving removal efficiencies of 89.88% (Fe³⁺), 54.88% (Cr³⁺), 97.32% (Ni²⁺), and 90.01% (K⁺). Concurrently, a 90.71% retention rate of the valuable iridium (Ir) catalyst is maintained, effectively preventing costly co-adsorption losses and extending the catalyst's industrial lifespan. Demonstrating reliable regenerability through simple acid washing, this work provides both fundamental physicochemical insights into CIP-mediated protection and a highly stable carbon-based alternative for metal separation and catalyst preservation in extreme chemical engineering environments.