12 February 2025 in Journal of Applied Physics
Profile non-idealities after plasma etching negatively affect the performance of advanced node devices. The charging effect is a well-known mechanism affecting the hardmask and substrate profiles. Unfortunately, directly characterizing this phenomenon in practical processes is extremely challenging. In this article, we propose a novel etching model to overcome this challenge by incorporating algorithms that simultaneously account for charging effects and particle reflection mechanisms. The model is able to reproduce the real-time profile evolution of both hardmask and substrate layers in an advanced nanoscale etching process. We calculate the electric field distribution induced by the surface charges accumulated on the hardmask, which affects both the trajectory of individual incident ions and the overall etching profiles. To validate our approach, we perform experiments of Si etching in Cl2 plasma and compare the simulated profiles with scanning electron microscope images. The model also identifies the impact of the charging effect on profile defects, such as mask faceting, substrate bowing, and microtrenching. This work provides insights into the charging effect mechanism and its influence on the etching profile, ultimately providing new knobs for advanced process development and optimization.
28 February 2026 in Communications Engineering
Dynamic Random Access Memory (DRAM), a critical component in modern computing systems, relies heavily on the structural integrity of its active area (AA) - a fin-shaped transistor region responsible for charge transfer in memory cells. During advanced DRAM fabrication, the plasma etching process often induces shape distortions in the AA region (termed “wiggling AA”), which degrade capacitive charging/discharging efficiency and device reliability. While this phenomenon is widely observed in industry, its mechanistic origins remain poorly understood, necessitating systematic investigation to enable precision etching control. In this paper, we fabricated active area transistors of DRAM structures and characterized the etching results using three-dimensional (3D) reconstruction based on focused ion beam-scanning electron microscopy (FIB-SEM) data. In parallel, we developed a 3D etching feature profile model that correlates process parameters with structural deformation and simulated the etching process under three oxygen flow rates. By integrating experimental data and simulation results, we systematically analyzed the mechanistic origins of the wiggling AA effect and demonstrated improvement by modulating the oxygen flow rate. This study bridges the gap between empirical observations and fundamental etching mechanisms, offering actionable strategies for optimizing high-density DRAM manufacturing processes.
27 July 2026 in Journal of Vacuum Science & Technology A
Plasma etching plays an increasingly critical role in advanced integrated circuit manufacturing, making physical modeling more essential for mechanism analysis and precise control. However, physical etching models involve multiple empirical parameters that are difficult to extract, limiting their reliability and accuracy. Traditional modeling methods rely heavily on manual calibration through extensive design of experiments. This manual approach is inefficient, highly costly, and struggles to resolve complex, nonlinear physical effects in multidimensional parameter optimization. To address these challenges, this paper proposes an autonomous modeling method based on deep ensemble neural networks to construct a high-fidelity physical etching model. It can automatically extract and calibrate key model parameters using significantly less experimental data, to achieve predicted profiles that are in excellent agreement with experiments. The combined deep ensemble and Bayesian optimization framework balances exploration and exploitation, effectively overcoming local optima traps in complex, high-dimensional parameter spaces during the optimization process, demonstrating high accuracy, transferability, and efficiency. We validated this method through Si substrate etching experiments in Cl2 plasma, where the highly matched profiles confirmed the method’s precision. Furthermore, we extended the validation to a different trench dimension, demonstrating its promising transferability. Compared with the traditional gradient descent method, our approach achieves a 10.2× speedup with a lower loss value. This work establishes a scientific and highly efficient methodology for high-cost modeling of the etching process in advanced semiconductor manufacturing.