1 January 2018 in Canadian Geotechnical Journal
Combining vacuum preloading with electro-osmosis of a dredged slurry is a significantly effective technology for ground improvement. Despite extensive research, the mechanism of vacuum preloading combined with electro-osmosis is still not properly understood, especially regarding the optimum electro-osmosis activation time. In this study, laboratory tests were performed to confirm the influence of electro-osmosis activation time on vacuum electro-osmosis consolidation of a dredged slurry. A total voltage of 12 V was used in five tests with different electro-osmosis activation times. During the combined process of vacuum preloading and electro-osmosis, the vacuum pressure, electric current, and volume of extracted water were monitored. The water content and shear strength were measured after the tests. The results indicated that electro-osmosis was activated when the degree of consolidation for the soil reached 60%. Thus, this approach can significantly promote the effectiveness of soil consolidation. The shear strength distribution along the depth was much more uniform in all tests with electro-osmosis. The shear strength decreased linearly with increasing distance from the anode rows, but sharp increases occurred near the cathode row (or prefabricated vertical drains).
1 April 2016 in Geosynthetics International
The understanding of cyclic and post-cyclic behaviours of the soil–geosynthetic interface is essential for the design of geosynthetic- reinforced soil structures under repeated loads, such as those induced by traffic, earthquakes and compaction. In this paper, a series of monotonic direct shear tests and cyclic direct shear integrating monotonic direct shear tests were conducted by using a large-scale direct shear testing device. The effect of normal stresses, cyclic shear amplitude and cycle number on the post-cyclic behaviour of the interface are investigated. In addition, the influence of cyclic shear on interface direct shear behaviour was discussed in detail. The test results indicated that both the peak and residual shear stresses of the interface during the post-cyclic shear phase increased linearly with normal stress and the number of cycles. The volume contraction, which was induced by the direct shear, decreased with the increase in normal stress. The interface apparent adhesion and friction angle increased with the cyclic shear.
1 June 2021 in Construction and Building Materials
7 October 2022 in Construction and Building Materials
23 September 2023 in Construction and Building Materials
26 October 2023 in Geotextiles and Geomembranes