15 February 2021 in Materials Advances
In this work, a novel class of fully organic, lightweight composite materials was prepared by incorporating highly crystalline, hydrothermally synthesized poly(p-phenylene pyromellitimide) (PPPI) microparticles into a commercial epoxy matrix. Particle loadings of up to 15 vol% could be achieved. Microstructural, mechanical, and thermal properties of these composites were investigated by scanning electron microscopy, three-point bending and Vickers hardness testing, dynamic mechanical analysis, nanoindentation, and thermogravimetric analysis. The incorporation of the PPPI filler particles into the epoxy matrix was found to be homogeneous. Powder X-ray diffraction shows that PPPI's crystallinity is retained in the composites, and infrared spectroscopy indicates a covalent bonding of PPPI to the epoxy matrix. Flexural modulus and storage modulus were increased by the PPPI addition, while the flexural strain at break was reduced. In contrast to that, the flexural strength remained unaffected by the incorporation of PPPI filler particles. Raising the filler content also resulted in an improvement of hardness. Furthermore, a decrease in glass-transition temperature with increasing PPPI content was observed, as well as a pronounced increase in thermal stability of the composites in comparison to the unfilled cured epoxy resin. These results indicate the high potential of this new class of composites with prospective applicability e.g. in the fields of sports equipment, aerospace, and automotive technology.
23 March 2023 in Open Ceramics
27 November 2023 in Advanced Materials Technologies
Additive manufacturing techniques such as vat photopolymerization have laid the foundation for impressive advances in the 3D structuring of ceramic materials. However, simultaneous structuring of these complex‐shaped ceramic objects on the sub‐µm scale, an essential feature for a wide range of applications in separation, energy conversion and storage, adsorption or sensing, has remained a tremendous challenge. This study demonstrates how complex‐shaped polymer‐derived SiOC ceramics exhibiting hierarchical porosity ranging from the sub‐µm‐ to the millimeter‐range can be generated by combining vat photopolymerization with photopolymerization‐induced phase separation using preceramic polymer‐based phase‐separating resins. In addition to allowing single‐step, multi‐level structural control, this new processing concept allows for the chemical modification of the 3D‐printable, phase‐separating preceramic polymer resins using organometallic compounds, including the possibility to generate functional metal nanoparticles in situ during the polymer‐to‐ceramic conversion. In this manner, a chemical toolbox is provided, facilitating the introduction of Ni, Co, Mo, or La into the hierarchically structured SiOC matrix. The versatile applicability of this new materials design approach is demonstrated by employing complex‐shaped, hierarchically porous monoliths containing in situ generated Ni nanoparticles as heterogeneous catalysts for CO2 methanation, with a profound increase in catalyst performance attained by oxidative post‐treatment of the metal‐ceramic hybrid material.
20 March 2023 in Microporous and Mesoporous Materials