26 September 2023 in IEEE Transactions on Industry Applications
The penetration of renewable energy resources (RES) is decreasing the inertia of current power grid due to their intermittent nature. Thus, the introduction of energy storage systems (ESS) can cancel this influence out, thereby increasing the power grid resilience. This paper proposes a novel isolated dc-dc converter designed for ESS in low voltage dc (LVDC) power grids. This converter aims to facilitate the development, installation, and efficient operation of ESS. The proposed converter is based on the conventional three-phase dual-active-bridge (TP-DAB) converter and incorporates a three-phase Yn-Y transformer with a three-limb core, as well as auxiliary converters using multiple cascaded bidirectional choppers connected to the primary side of the transformer. Unlike the traditional TP-DAB converter, which suffers from large converter currents due to reactive current, the proposed converter features the fundamental-frequency unity-power-factor operation, effectively reducing the root-mean-square (RMS) and peak currents under a wide range of operating conditions, leading to higher efficiency compared with the TP-DAB converter. The paper presents the operating principles and control methods of the proposed converter and compares its performance with the conventional TP-DAB converter in terms of RMS and peak currents and power losses. The feasibility and practical applicability of the proposed converter are verified through a 150 V, 2.5 kW downscaled prototype.
30 July 2024 in IEEE Transactions on Industry Applications
This paper focuses on an isolated cascaded-choppers (CC) DC-DC converter for energy storage systems (ESS) in low-voltage direct-current (LVDC) grids. The CC DC-DC converter presents good controllability, low peak and RMS currents, and high efficiency compared with the conventional three-phase dual-active-bridge (TP-DAB) converter. Despite of its advantages, the CC DC-DC converter still faces the challenges of large peak current caused by zero-sequence DC current and power capacity drop caused by overmodulation, particularly when the product of transformer windings turns ratio and voltage conversion ratio is significantly far from one. To solve these issues, this paper proposes new operating principles based on variable duty ratios in the three-phase bridges of the CC DC-DC converter, which can achieve DC-current elimination and increase power transfer capability simultaneously. The validity and effectiveness of the new operating principes and the effect of DC-current elimination are verified experimentally using a 150 V, 2.5 kW downscaled model.